Erwan Gouriou 346d2ab92f drivers/uart: stm32f1: Add remap support for dt configured pinctrl ... On stm32f1 series, device pinctrl configuration could be modified thanks to remapping capability. Remapping allows to provide alternate pinctrl configuration to a peripheral device and applies to all impacted pins. So, specifically for stm32f1 series, apply remapping when required before proceeding with pin configuration. Additionally, because remapping is defined individually for each pin, apply a function on pinctrl configuration to check remapping setting coherency accorss pins. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>		2020-10-01 11:08:42 -05:00
..
CMakeLists.txt	drivers: serial: Add NXP IUART driver	2020-08-14 14:51:50 -05:00
Kconfig	drivers: serial: Add NXP IUART driver	2020-08-14 14:51:50 -05:00
Kconfig.altera_jtag
Kconfig.cc13xx_cc26xx
Kconfig.cc32xx
Kconfig.cmsdk_apb
Kconfig.esp32
Kconfig.gecko
Kconfig.imx
Kconfig.leuart_gecko
Kconfig.litex
Kconfig.lpc11u6x	drivers: serial: Add support for LPC11U6X UART controllers	2020-07-29 20:12:24 +02:00
Kconfig.mcux
Kconfig.mcux_flexcomm	drivers: uart: mcux_flexcomm: Convert to DT_INST	2020-04-28 16:54:30 -05:00
Kconfig.mcux_iuart	drivers: serial: Add NXP IUART driver	2020-08-14 14:51:50 -05:00
Kconfig.mcux_lpsci
Kconfig.mcux_lpuart
Kconfig.miv
Kconfig.msp432p4xx
Kconfig.native_posix	drivers: serial: native_posix: Add example using gnome-terminal	2020-08-12 17:12:31 +02:00
Kconfig.npcx	driver: serial: Add UART support in NPCX series.	2020-08-13 16:42:20 +02:00
Kconfig.nrfx	drivers: serial: nrf: Remove flow control configuration from kconfig	2020-06-09 19:06:16 +02:00
Kconfig.ns16550
Kconfig.nuvoton	drivers: serial: add support for Nuvoton series UART	2020-07-01 21:09:25 +02:00
Kconfig.pl011
Kconfig.psoc6
Kconfig.rtt	drivers: serial: uart_rtt converted to devicetree	2020-09-03 21:51:28 +02:00
Kconfig.rv32m1_lpuart
Kconfig.sam0
Kconfig.sifive
Kconfig.stellaris
Kconfig.stm32
Kconfig.uart_sam
Kconfig.usart_sam
Kconfig.xlnx	drivers: serial: add driver for the Xilinx UART Lite IP	2020-08-14 13:35:39 -05:00
Kconfig.xmc4xxx	drivers: serial: add XMC seris UART support	2020-05-09 14:21:44 +02:00
leuart_gecko.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_altera_jtag_hal.c	device: Const-ify all device driver instance pointers	2020-09-02 13:48:13 +02:00
uart_cc13xx_cc26xx.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_cc32xx.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_cmsdk_apb.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_esp32.c	drivers: Manual const-ification of device driver instance	2020-09-02 13:48:13 +02:00
uart_gecko.c	drivers: Manual const-ification of device driver instance	2020-09-02 13:48:13 +02:00
uart_handlers.c	device: Const-ify all device driver instance pointers	2020-09-02 13:48:13 +02:00
uart_imx.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_liteuart.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_lpc11u6x.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_lpc11u6x.h	device: Const-ify all device driver instance pointers	2020-09-02 13:48:13 +02:00
uart_mcux_flexcomm.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_mcux_iuart.c	drivers: Manual const-ification of device driver instance	2020-09-02 13:48:13 +02:00
uart_mcux_lpsci.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_mcux_lpuart.c	drivers: serial: uart_mcux_lpuart: Add configure functions	2020-09-29 13:42:39 -05:00
uart_mcux.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_miv.c	drivers: serial: Fix device instance const qualifier loss	2020-09-02 13:48:13 +02:00
uart_msp432p4xx.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_native_posix.c	device: Const-ify all device driver instance pointers	2020-09-02 13:48:13 +02:00
uart_npcx.c	drivers: clk_ctrl: npcx: fixed 'line length exceeds 80 columns' warning.	2020-09-03 21:53:35 +02:00
uart_nrfx_uart.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_nrfx_uarte.c	drivers: serial: nrf_uarte: Reset rx byte counters	2020-09-28 12:15:52 +02:00
uart_ns16550_port_x.h	drivers: Manual const-ification of device driver instance	2020-09-02 13:48:13 +02:00
uart_ns16550.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_ns16550.h
uart_nuvoton.c	device: Const-ify all device driver instance pointers	2020-09-02 13:48:13 +02:00
uart_pl011.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_psoc6.c	device: Const-ify all device driver instance pointers	2020-09-02 13:48:13 +02:00
uart_rtt.c	drivers: serial: uart_rtt async support	2020-09-03 21:51:28 +02:00
uart_rv32m1_lpuart.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_sam.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_sam0.c	drivers: Manual const-ification of device driver instance	2020-09-02 13:48:13 +02:00
uart_sifive.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_stellaris.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00
uart_stm32.c	drivers/uart: stm32f1: Add remap support for dt configured pinctrl	2020-10-01 11:08:42 -05:00
uart_stm32.h	drivers/serial: stm32: Enable use of dt pinctrl as serial signals	2020-10-01 11:08:42 -05:00
uart_xlnx_ps.c	drivers: Manual const-ification of device driver instance	2020-09-02 13:48:13 +02:00
uart_xlnx_uartlite.c	drivers: Manual const-ification of device driver instance	2020-09-02 13:48:13 +02:00
uart_xmc4xxx.c	device: Const-ify all device driver instance pointers	2020-09-02 13:48:13 +02:00
usart_sam.c	isr: Normalize usage of device instance through ISR	2020-09-02 13:48:13 +02:00