mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-08-31 10:45:55 +00:00
Some drivers APIs were not wrapped using the DEVICE_API macro. Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
173 lines
5.6 KiB
C
173 lines
5.6 KiB
C
/*
|
|
* Copyright (c) 2024 sensry.io
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT sensry_sy1xx_gpio
|
|
|
|
#include <zephyr/logging/log.h>
|
|
LOG_MODULE_REGISTER(sy1xx_gpio, CONFIG_GPIO_LOG_LEVEL);
|
|
|
|
#include <errno.h>
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/device.h>
|
|
#include <zephyr/drivers/gpio.h>
|
|
#include <zephyr/sys/util.h>
|
|
#include <zephyr/drivers/gpio/gpio_utils.h>
|
|
#include <pinctrl_soc.h>
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
|
|
#define SY1XX_GPIO_GET_OFFS 0x00
|
|
#define SY1XX_GPIO_SET_OFFS 0x1c
|
|
#define SY1XX_GPIO_CLR_OFFS 0x20
|
|
|
|
struct sy1xx_gpio_config {
|
|
/* Base address for GPIO port*/
|
|
uint32_t port_base_addr;
|
|
/* configuration base address for the pad config */
|
|
uint32_t pad_cfg_offs;
|
|
/* mask of pins which are allowed to modify by the gpio driver */
|
|
uint32_t pin_mask;
|
|
};
|
|
|
|
/* Function prototypes for the GPIO API */
|
|
static int sy1xx_gpio_driver_configure(const struct device *dev, gpio_pin_t pin,
|
|
gpio_flags_t flags);
|
|
static int sy1xx_gpio_driver_port_get_raw(const struct device *dev, gpio_port_value_t *value);
|
|
static int sy1xx_gpio_driver_port_set_masked_raw(const struct device *dev, gpio_port_pins_t mask,
|
|
gpio_port_value_t value);
|
|
static int sy1xx_gpio_driver_port_set_bits_raw(const struct device *dev, gpio_port_pins_t pins);
|
|
static int sy1xx_gpio_driver_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t pins);
|
|
static int sy1xx_gpio_driver_port_toggle_bits(const struct device *dev, gpio_port_pins_t pins);
|
|
|
|
static int sy1xx_gpio_driver_init(const struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int sy1xx_gpio_driver_configure(const struct device *dev, gpio_pin_t pin, gpio_flags_t flags)
|
|
{
|
|
const struct sy1xx_gpio_config *const cfg = dev->config;
|
|
|
|
if (((BIT(pin)) & cfg->pin_mask) == 0) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* initialize the pinctrl config for the given gpio pin */
|
|
pinctrl_soc_pin_t pcfg = {
|
|
.addr = cfg->pad_cfg_offs + ROUND_DOWN(pin, 4),
|
|
.iro = (pin % 4) * 8,
|
|
.cfg = 0,
|
|
};
|
|
|
|
/* translate gpio flags into pinctrl config */
|
|
if (flags & GPIO_INPUT) {
|
|
|
|
if (flags & GPIO_PULL_UP) {
|
|
pcfg.cfg |= BIT(SY1XX_PAD_PULL_UP_OFFS);
|
|
}
|
|
if (flags & GPIO_PULL_DOWN) {
|
|
pcfg.cfg |= BIT(SY1XX_PAD_PULL_DOWN_OFFS);
|
|
}
|
|
|
|
} else if (flags & GPIO_OUTPUT) {
|
|
pcfg.cfg |= BIT(SY1XX_PAD_DIR_OFFS);
|
|
|
|
if (flags & GPIO_OUTPUT_INIT_LOW) {
|
|
sy1xx_gpio_driver_port_set_masked_raw(dev, BIT(pin), 0);
|
|
}
|
|
if (flags & GPIO_OUTPUT_INIT_HIGH) {
|
|
sy1xx_gpio_driver_port_set_masked_raw(dev, BIT(pin), BIT(pin));
|
|
}
|
|
|
|
} else if (flags == GPIO_DISCONNECTED) {
|
|
pcfg.cfg |= BIT(SY1XX_PAD_TRISTATE_OFFS);
|
|
|
|
} else {
|
|
LOG_ERR("%s: unsupported pinctrl mode for pin: %u", dev->name, pin);
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
/* PAD config */
|
|
int32_t ret = pinctrl_configure_pins(&pcfg, 1, PINCTRL_STATE_DEFAULT);
|
|
|
|
if (ret != 0) {
|
|
LOG_ERR("%s: failed to apply pinctrl for pin: %u", dev->name, pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sy1xx_gpio_driver_port_get_raw(const struct device *dev, gpio_port_value_t *value)
|
|
{
|
|
const struct sy1xx_gpio_config *const cfg = dev->config;
|
|
|
|
*value = sys_read32(cfg->port_base_addr | SY1XX_GPIO_GET_OFFS);
|
|
return 0;
|
|
}
|
|
|
|
int sy1xx_gpio_driver_port_set_masked_raw(const struct device *dev, gpio_port_pins_t mask,
|
|
gpio_port_value_t value)
|
|
{
|
|
const struct sy1xx_gpio_config *const cfg = dev->config;
|
|
|
|
uint32_t set_mask = (mask & value) & (cfg->pin_mask);
|
|
uint32_t clr_mask = (mask & (~value)) & (cfg->pin_mask);
|
|
|
|
sy1xx_gpio_driver_port_set_bits_raw(dev, set_mask);
|
|
sy1xx_gpio_driver_port_clear_bits_raw(dev, clr_mask);
|
|
return 0;
|
|
}
|
|
|
|
int sy1xx_gpio_driver_port_set_bits_raw(const struct device *dev, gpio_port_pins_t pins)
|
|
{
|
|
const struct sy1xx_gpio_config *const cfg = dev->config;
|
|
|
|
/* affects only pins that are set to logical '1' */
|
|
sys_write32((uint32_t)pins, cfg->port_base_addr | SY1XX_GPIO_SET_OFFS);
|
|
return 0;
|
|
}
|
|
|
|
int sy1xx_gpio_driver_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t pins)
|
|
{
|
|
const struct sy1xx_gpio_config *const cfg = dev->config;
|
|
|
|
/* affects only pins that are set to logical '1' */
|
|
sys_write32((uint32_t)pins, cfg->port_base_addr | SY1XX_GPIO_CLR_OFFS);
|
|
return 0;
|
|
}
|
|
|
|
int sy1xx_gpio_driver_port_toggle_bits(const struct device *dev, gpio_port_pins_t pins)
|
|
{
|
|
const struct sy1xx_gpio_config *const cfg = dev->config;
|
|
|
|
uint32_t current = sys_read32(cfg->port_base_addr | SY1XX_GPIO_GET_OFFS);
|
|
|
|
sy1xx_gpio_driver_port_set_masked_raw(dev, pins, ~current);
|
|
return 0;
|
|
}
|
|
|
|
/* Define the GPIO API structure */
|
|
static DEVICE_API(gpio, sy1xx_gpio_driver_api) = {
|
|
.pin_configure = sy1xx_gpio_driver_configure,
|
|
.port_get_raw = sy1xx_gpio_driver_port_get_raw,
|
|
.port_set_masked_raw = sy1xx_gpio_driver_port_set_masked_raw,
|
|
.port_set_bits_raw = sy1xx_gpio_driver_port_set_bits_raw,
|
|
.port_clear_bits_raw = sy1xx_gpio_driver_port_clear_bits_raw,
|
|
.port_toggle_bits = sy1xx_gpio_driver_port_toggle_bits,
|
|
};
|
|
|
|
#define SY1XX_GPIO_INIT(n) \
|
|
\
|
|
static const struct sy1xx_gpio_config sy1xx_gpio_##n##_config = { \
|
|
.port_base_addr = (uint32_t)DT_INST_REG_ADDR_BY_IDX(n, 0), \
|
|
.pad_cfg_offs = (uint32_t)DT_INST_PROP(n, pad_cfg), \
|
|
.pin_mask = (uint32_t)GPIO_PORT_PIN_MASK_FROM_DT_INST(n)}; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(n, sy1xx_gpio_driver_init, NULL, NULL, &sy1xx_gpio_##n##_config, \
|
|
PRE_KERNEL_1, CONFIG_GPIO_INIT_PRIORITY, &sy1xx_gpio_driver_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(SY1XX_GPIO_INIT)
|