Alexey Brodkin 853e52472d board: arc: hsdk_2cores: Re-add missing taps into JTAG chain ... On introduction of a "simplified" HSDK configuration where we only use 2 cores out of 4 (in assumption that it will be working much more reliably) we excluded a bit too much of details from OpenOCD script. In particular we stripped not-used cores from JTAG chain description which made OpenOCD quite unhappy: ----------------------------->8---------------------------- Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling" Info : clock speed 10000 kHz Info : JTAG tap: arc-em.cpu2 tap/device found: 0x200c24b1 (mfg: 0x258 (ARC International), part: 0x00c2, ver: 0x2) Warn : JTAG tap: arc-em.cpu2 UNEXPECTED: 0x200c24b1 (mfg: 0x258 (ARC International), part: 0x00c2, ver: 0x2) Error: JTAG tap: arc-em.cpu2 expected 1 of 1: 0x200424b1 (mfg: 0x258 (ARC International), part: 0x0042, ver: 0x2) Info : JTAG tap: arc-em.cpu1 tap/device found: 0x200824b1 (mfg: 0x258 (ARC International), part: 0x0082, ver: 0x2) Warn : JTAG tap: arc-em.cpu1 UNEXPECTED: 0x200824b1 (mfg: 0x258 (ARC International), part: 0x0082, ver: 0x2) Error: JTAG tap: arc-em.cpu1 expected 1 of 1: 0x200024b1 (mfg: 0x258 (ARC International), part: 0x0002, ver: 0x2) Info : JTAG tap: auto0.tap tap/device found: 0x200424b1 (mfg: 0x258 (ARC International), part: 0x0042, ver: 0x2) Info : JTAG tap: auto1.tap tap/device found: 0x200024b1 (mfg: 0x258 (ARC International), part: 0x0002, ver: 0x2) Error: Trying to use configured scan chain anyway... ----------------------------->8---------------------------- That lead us to the situation when the target cores were programmed in a wrong way effectively failing all tests. Fixing it now. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>		2020-12-15 08:36:50 -05:00
..
arc	board: arc: hsdk_2cores: Re-add missing taps into JTAG chain	2020-12-15 08:36:50 -05:00
arm	boards: efr32mg_sltb004a: rework sensor power enable infrastructure	2020-12-15 11:19:26 +01:00
common
nios2
posix	posix: Add cpu_hold() function to better emulate code delay	2020-12-14 12:32:11 +01:00
riscv	boards: riscv: litex_vexriscv: enable clock control driver	2020-12-06 12:35:16 -05:00
shields	shields: enable SD card support on Waveshare Epaper shield	2020-12-07 12:56:13 +01:00
sparc	boards: set CPU_HAS_FPU on LEON3 soc and boards	2020-12-04 14:33:43 +02:00
x86	Revert "boards/x86: Enable Intel VT-D for up_squared"	2020-12-14 23:21:41 -05:00
xtensa
CMakeLists.txt
deprecated.cmake
index.rst
Kconfig