mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-09-15 23:42:47 +00:00
876f751cde
HTML documentation shows misaligned text that may be a bit confusing. This issue was caused by wrong indentation. Furthermore, board specific instructions to build the image does not include any instruction header. This commit fixes the above described issues. Change-Id: Ie965e09f32f46a9d69aac28c4b389084f06b31b6 Signed-off-by: Flavio Santes <flavio.santes@intel.com> |
||
|---|---|---|
| .. | ||
| common | ||
| dhcpv4_client | ||
| dns_client | ||
| echo_client | ||
| echo_server | ||
| ieee802154 | ||
| leds_demo | ||
| mbedtls_dtlsclient | ||
| mbedtls_dtlsserver | ||
| mbedtls_sslclient | ||
| wpan_serial | ||
| wpanusb | ||
| zoap_client | ||
| zoap_server | ||
| zperf | ||
| net.rst | ||
| qemu_setup.rst | ||
| README | ||
Description of various IP stack test applications ================================================= echo_server ----------- The echo server test implements a network server that listens UDP sockets. If that socket receives data, the server reverses the data and sends it back. The echo client can be running in the host system in which case you need to use SLIP to connect to qemu. This usage scenario is described in net-tools project README file [1]. This is the default if you type "make run" in echo_server test application directory. The network IP stack hooks right under IP stack (network level) and sends the IP packet to host using SLIP. The layer 2 is the SLIP layer in this case, no radio layer is simulated or used. The echo server qemu instance can also be running against echo client that is running in another qemu. For this you need two terminal windows. In terminal 1 go to echo_server directory and type "make server". This will start the echo server and setup qemu pipes in suitable way and it will also start monitor application that will store the transferred network traffic into pcap file for later analysis. Then in terminal 2 go to echo_client directory and type "make client". This will start the echo client that will start to send data to the server and verify that it has received the data back correctly. In the two qemu case we are simulating the whole radio network meaning that the saved pcap file will contain 802.15.4 network packets. echo_client ----------- The echo client test implements a network client that will send UDP data to the echo server. The client verifies that it has received data to the sent message and that the data is correct. The echo server can be running in the host system in which case you need to use SLIP to connect to qemu. This usage scenario is described in net-tools project README file [1]. This is the default if you type "make run" in echo_client test application directory. The network IP stack hooks right under IP stack (network level) and sends the IP packet to host using SLIP. The layer 2 is the SLIP layer in this case, no radio layer is simulated or used. The echo client qemu instance can also be running against echo server that is running in another qemu. This test scenario is described in echo_server chapter above. zoap_server ----------- The Zoap server application implements a trivial CoAP server which exposes a single resource "a/light", that only provides the GET method. It can be run similar to the echo_server sample: using two terminals, (1) for zoap_server, run 'make server' in its directory, (2) for zoap_client, run 'make client' in the zoap_client test directory. zoap_client ----------- The Zoap client application does a single request against a 'a/light' resource, which has the first response lost (so retransmissions are basically verified). Please refer to the section above about how to run these applications together. wpanusb ------- The wpanusb application exports IEEE 802.15.4 radio over USB to be used in other Operating Systems like Linux. In this scenario Linux SoftMAC driver must be used implementing IEEE 802.15.4 stack inside Linux. wpan_serial ----------- The wpan_serial application implements IEEE 802.15.4 "serial-radio" protocol. This is the protocol used in Contiki-based native border routers. [1] https://gerrit.zephyrproject.org/r/gitweb?p=net-tools.git;a=summary