mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-08-28 14:05:22 +00:00
20202902f2
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
|
||
|---|---|---|
| .. | ||
| CAN | ||
| crypto | ||
| current_sensing | ||
| entropy | ||
| flash_shell | ||
| gpio | ||
| i2c_fujitsu_fram | ||
| lcd_hd44780 | ||
| led_apa102c | ||
| led_lp3943 | ||
| led_lp5562 | ||
| led_lpd8806 | ||
| led_pca9633 | ||
| led_ws2812 | ||
| random | ||
| rtc | ||
| soc_flash_nrf | ||
| spi_flash | ||
| spi_fujitsu_fram | ||
| watchdog | ||
| drivers.rst | ||