mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-09-06 12:51:57 +00:00
b78ffc0e6b
Docs need a label at the top so we can use :ref:`labelname` to create a link to that doc from other docs. Change-Id: I57d65a8888f78aa61d776f607a5db86bdb35726c Signed-off-by: David B. Kinder <david.b.kinder@intel.com> |
||
|---|---|---|
| .. | ||
| src | ||
| Makefile | ||
| prj.conf | ||
| README.rst | ||
| testcase.ini | ||
.. _servo-motor-sample: PWM: Servo motor ################ Overview ******** This is a sample app which drives a servo motor using PWM. This app is targeted for servo motor ROB-09065. With the PWM control signal, the servo motor can rotate to any angle between 0 and 180 degrees. The corresponding PWM pulse width is between 700 micro seconds and 2300 micro seconds. The motor is programmed to rotate back and forth in the 180 degree range. Since different servo motors may require different PWM pulse width, you may need to modify the pulse width in the app if you are using a different servo motor. Wiring ****** Arduino 101 and Quark D2000 CRB =============================== You will need to connect the motor's red wire to 5v, the black wire to ground and the white wire to PWM 0 via the shield. Building and Running ******************** This sample can be built for multiple boards, in this example we will build it for the arduino_101 board: .. code-block:: console $ cd samples/basic/servo_motor $ make BOARD=arduino_101 $ make BOARD=arduino_101 flash