mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-09-04 20:33:12 +00:00
9b9d455f02
Problem: When flashing a multi-image project with STLink through sysbuild, the flash utility is told to erase the whole flash between each single image flash. Resulting in a partial flash where only the last image is effectively stored on flash... Correction: A `west flash` must not implicitly perform a mass erase on its own. If a flash erase is required, the option has to be passed manually. The problem is discussed in the following issue: zephyrproject-rtos/zephyr#69582 Due to CI tests errors, the correction is not applied on eval board `b_u585i_iot02a`. See following issue: zephyrproject-rtos/zephyr#75164 Signed-off-by: Alex Fabre <alex.fabre@rtone.fr>
16 lines
610 B
CMake
16 lines
610 B
CMake
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
board_runner_args(jlink "--device=STM32H735IG" "--speed=4000")
|
|
board_runner_args(openocd --target-handle=_CHIPNAME.cpu0)
|
|
|
|
if(CONFIG_STM32_MEMMAP)
|
|
board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw")
|
|
board_runner_args(stm32cubeprogrammer "--extload=MT25TL01G_STM32H750B-DISCO.stldr")
|
|
else()
|
|
board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw" )
|
|
endif()
|
|
|
|
include(${ZEPHYR_BASE}/boards/common/stm32cubeprogrammer.board.cmake)
|
|
include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
|
|
include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
|