mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-09-04 08:41:56 +00:00
d94a75d4dd
Do not limit to whitelisted boards, instead make it build/run for any board that defines required DTS macros. Remove QMSI kconfigs and depend on DTS only. Signed-off-by: Anas Nashif <anas.nashif@intel.com> |
||
|---|---|---|
| .. | ||
| src | ||
| CMakeLists.txt | ||
| prj.conf | ||
| README.rst | ||
| sample.yaml | ||
.. _rgb-led-sample: PWM: RGB LED ############ Overview ******** This is a sample app which drives a RGB LED using PWM. There are three LEDs of single color in a RGB LED. The three LEDs will be driven by a pwm port each. The pulse width for each pwm port will change from zero to period. So, the brightness for each LED will change from dark to max brightness in 11 steps. The three "for" loops (one for each LED) will generate 1331 combinations and so, 1331 different colors. The whole process will repeat for ever. Wiring ****** Arduino 101 =========== You will need to connect the LED pins to PWM0, PWM1 and PWM2 on Arduino 101 via the shield. Depending on what kind of RGB LED you are using, please connect the common cathode to the ground or the common anode to Vcc. You need current limiting resistor for each of the single color LEDs. The sample app requires three PWM ports. So, it can not work on Quark D2000 platform. Hexiwear K64 ============ No special board setup is necessary because there is an on-board RGB LED connected to the K64 PWM. Building and Running ******************** This samples does not output anything to the console. It can be built and flashed to a board as follows: .. zephyr-app-commands:: :zephyr-app: samples/basic/rgb_led :board: arduino_101 :goals: build flash :compact: