zephyr/arch/x86/generic_pc/defs.objs
Tomasz Bursztyka 68a58ca587 kconf: Add an option to select PCI on x86 architecture
By default it is set to 'n'. This will be useful to enable the PCI layer
code if required. On quark boark, it is selected by default as UART
driver needs it currently.

Change-Id: I7aa38e73c431c66ebbd8092aff0a14d5fb9268d5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2016-02-05 20:14:01 -05:00

127 lines
3.9 KiB
Plaintext

# defs.objs - build system
#
# Copyright (c) 2015 Wind River Systems, Inc.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1) Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# 2) Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# 3) Neither the name of Wind River Systems nor the names of its contributors
# may be used to endorse or promote products derived from this software without
# specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
bsp_INCLUDE_DIR = $(strip \
${vBASE}/kernel/common/bsp \
${vBASE}/include/bsp \
${vBASE}/include \
${vBASE}/include/drivers \
${vBASE}/drivers \
${vBASE}/arch/${vARCH} \
${vBSP_BASE_DIR}/${vBSP} \
)
bsp_kernel_SRC = $(strip \
arch/${vARCH}/bsp/crt0.s \
arch/${vARCH}/bsp/cache.c \
arch/${vARCH}/bsp/cache_s.s \
arch/${vARCH}/bsp/rand32.c \
arch/${vARCH}/bsp/sysFatalErrorHandler.c \
)
bsp_drivers_SRC = $(strip \
drivers/serial/ns16550.c \
drivers/console/uart_console.c \
)
ifeq (${CONFIG_PCI},y)
bsp_drivers_SRC += $(strip \
drivers/pci/pci_config.c \
drivers/pci/pci_interface.c \
drivers/pci/pci.c \
)
endif
ifeq (${CONFIG_MICROKERNEL},y)
bsp_kernel_SRC += $(strip \
)
bsp_drivers_SRC += $(strip \
)
endif
# drivers section
# timer drivers
bsp_drivers_SRC_PIT_y = drivers/timer/i8253.c
bsp_drivers_SRC_LOAPIC_TIMER_y = arch/${vARCH}/timer/loApicTimer.c
bsp_drivers_SRC_HPET_y = arch/${vARCH}/timer/hpet.c
# Bluetooth drivers
bsp_drivers_SRC_BLUETOOTH_UART_y = drivers/bluetooth/uart.c
# interrupt controllers
# variable indicates PCI initialization
bsp_PIC_INIT = ${CONFIG_PIC}${CONFIG_SHUTOFF_PIC}
# variable indicates processing PIC interrupts
bsp_PIC_INTERRUPTS = ${CONFIG_PIC}
bsp_drivers_SRC_LOAPIC_y = arch/${vARCH}/interrupt_controller/loApicIntr.c
bsp_drivers_SRC_IOAPIC_y = arch/${vARCH}/interrupt_controller/ioApicIntr.c
bsp_drivers_SRC_PIC_y = drivers/interrupt_controller/i8259.c
bsp_kernel_SRC_PICBOI_y = arch/${vARCH}/bsp/i8259Boi.s
bsp_kernel_SRC += $(strip \
${bsp_kernel_SRC_PICBOI_${bsp_PIC_INTERRUPTS}} \
)
bsp_drivers_SRC += $(strip \
${bsp_drivers_SRC_PIT_${CONFIG_PIT}} \
${bsp_drivers_SRC_LOAPIC_TIMER_${CONFIG_LOAPIC_TIMER}} \
${bsp_drivers_SRC_HPET_${CONFIG_HPET}} \
${bsp_drivers_SRC_LOAPIC_${CONFIG_LOAPIC}} \
${bsp_drivers_SRC_IOAPIC_${CONFIG_IOAPIC}} \
${bsp_drivers_SRC_PIC_${bsp_PIC_INIT}} \
${bsp_drivers_SRC_BLUETOOTH_UART_${CONFIG_BLUETOOTH_UART}} \
)
# BSP specific section
bsp_SRC_LOAPIC_y = arch/${vARCH}/bsp/systemApic.c
bsp_SRC_PIC_y = arch/${vARCH}/bsp/systemPic.c
bsp_platform_SRC = $(strip \
${bsp_SRC_LOAPIC_${CONFIG_LOAPIC}} \
${bsp_SRC_PIC_${CONFIG_PIC}} \
arch/${vARCH}/bsp/driver_static_irq_stubs.s \
)
bsp_SRC = $(strip \
${vBSP_BASE_DIR}/${vBSP}/system.c \
$(addprefix ${vBASE}/,${bsp_kernel_SRC}) \
$(addprefix ${vBASE}/,${bsp_drivers_SRC}) \
$(addprefix ${vBASE}/,${bsp_platform_SRC}) \
)
KLIBS += bsp