Marcin Niestroj 0d58960abb drivers: pwm: nrf_sw: convert to timer phandle instead instance number ... So far 'timer-instance' DT property was the way to configure TIMER which was used for generating PWM signal. Replace that by using 'generator' phandle, so we get prepared for supporting RTC instances as PWM signal generator. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>		2020-12-15 15:19:43 +01:00
..
atmel	dts: gpio: Add atmel sam4l GPIO bindings	2020-12-02 11:48:43 -06:00
broadcom	dts: arm: viper: Add tx/rx pl330 channels for iProc PCIe node	2020-12-01 14:56:59 -05:00
cypress	dts: hwinfo: Add cypress psoc6 unique serial id	2020-10-21 07:20:13 -05:00
infineon	soc: arm: add infineon_xmc series support	2020-05-09 14:21:44 +02:00
microchip	arm: systick: default CORTEX_M_SYSTICK based on dts	2020-09-10 09:49:00 +02:00
nordic	drivers: pwm: nrf_sw: convert to timer phandle instead instance number	2020-12-15 15:19:43 +01:00
nuvoton	driver: host_uart: Add host-uart device in npcx.	2020-12-09 00:46:57 -05:00
nxp	dts: arm: nxp: nxp_lpc55s6x: Fix a few reg sizes	2020-12-03 03:58:58 -06:00
qemu-virt	qemu_cortex_a53: Get SRAM info from DTS	2020-12-05 10:24:54 -05:00
quicklogic	dts: add EOS S3 devicetree	2020-09-04 14:48:49 -04:00
silabs	boards: arm: efm32gg_*: Enable SWO logging	2020-10-14 08:35:20 -05:00
st	soc: arm: st: Add spi to stm32l5 MCUs	2020-12-14 13:16:10 -05:00
ti	arm: systick: default CORTEX_M_SYSTICK based on dts	2020-09-10 09:49:00 +02:00
xilinx	boards: qemu_cortex_r5: Fix memory size	2020-04-14 09:44:27 +02:00
armv6-m.dtsi	arm: systick: default CORTEX_M_SYSTICK based on dts	2020-09-10 09:49:00 +02:00
armv7-m.dtsi	arm: systick: default CORTEX_M_SYSTICK based on dts	2020-09-10 09:49:00 +02:00
armv7-r.dtsi
armv8-a.dtsi
armv8-m.dtsi	arm: systick: default CORTEX_M_SYSTICK based on dts	2020-09-10 09:49:00 +02:00