Jeremy LOCHE f3bdf8ae91 drivers: clock_control: stm32h7 add preprocessor clock check ... Adds preprocessor clock feasibility check to avoid setting too high clocks to SYSCLK,AHB,APBx buses. Also checks if CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC matches with the desired clock configuration by the M7 core. Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>		2020-08-05 16:22:53 +02:00
..
beetle_clock_control.c	zephyr: replace zephyr integer types with C99 types	2020-06-08 08:23:57 -05:00
clock_control_esp32.c
clock_control_esp32.h
clock_control_lpc11u6x.c
clock_control_lpc11u6x.h
clock_control_mcux_ccm.c
clock_control_mcux_mcg.c	zephyr: replace zephyr integer types with C99 types	2020-06-08 08:23:57 -05:00
clock_control_mcux_pcc.c
clock_control_mcux_scg.c	zephyr: replace zephyr integer types with C99 types	2020-06-08 08:23:57 -05:00
clock_control_mcux_sim.c	zephyr: replace zephyr integer types with C99 types	2020-06-08 08:23:57 -05:00
clock_control_rv32m1_pcc.c
clock_stm32_ll_common.c
clock_stm32_ll_common.h
clock_stm32_ll_h7.c	drivers: clock_control: stm32h7 add preprocessor clock check	2020-08-05 16:22:53 +02:00
clock_stm32_ll_mp1.c
clock_stm32f1.c
clock_stm32f2_f4_f7.c
clock_stm32f0_f3.c
clock_stm32g4.c
clock_stm32g0.c
clock_stm32l4_l5_wb.c
clock_stm32l0_l1.c
CMakeLists.txt
Kconfig
Kconfig.beetle
Kconfig.esp32
Kconfig.lpc11u6x
Kconfig.mcux_ccm
Kconfig.mcux_mcg
Kconfig.mcux_pcc
Kconfig.mcux_scg
Kconfig.mcux_sim
Kconfig.nrf
Kconfig.rv32m1	kconfig: Clean up header comments and make them consistent	2019-11-04 17:31:27 -05:00
Kconfig.stm32	drivers: clock_control: stm32h7: Add HSE,HSI,CSI,PLL sysclk opt.	2020-07-27 13:24:27 +02:00
Kconfig.stm32f1
Kconfig.stm32f2_f4_f7
Kconfig.stm32f0_f3
Kconfig.stm32g0
Kconfig.stm32g4	kconfig: Clean up header comments and make them consistent	2019-11-04 17:31:27 -05:00
Kconfig.stm32h7
Kconfig.stm32l4_l5_wb
Kconfig.stm32l0_l1
nrf_clock_calibration.c
nrf_clock_calibration.h
nrf_power_clock.c	drivers: clock_control: nrf: Add clock status shell command	2020-07-20 16:22:21 +02:00