zephyr/net/bluetooth/l2cap_internal.h
Arkadiusz Lichwa 2178fc5ab3 Bluetooth: L2CAP: Add configuration response handler
Adds L2CAP configuration response protocol definitions to be able handle
response from remote in reaction to issued local request to exchange
MTU. Current optimistic path of configuration initiated from local
assumes to set MTU contract in one iteration.

Change-Id: If86d96b37e9cd888ad10a624a79c864a137e027d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-06-24 10:07:24 +02:00

257 lines
6.4 KiB
C

/** @file
* @brief Internal APIs for Bluetooth L2CAP handling.
*/
/*
* Copyright (c) 2015-2016 Intel Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <bluetooth/l2cap.h>
#define BT_L2CAP_CID_BR_SIG 0x0001
#define BT_L2CAP_CID_ATT 0x0004
#define BT_L2CAP_CID_LE_SIG 0x0005
#define BT_L2CAP_CID_SMP 0x0006
/* Supported BR/EDR fixed channels mask (first octet) */
#define BT_L2CAP_MASK_BR_SIG 0x02
#define BT_L2CAP_MASK_SMP 0x80
struct bt_l2cap_hdr {
uint16_t len;
uint16_t cid;
} __packed;
struct bt_l2cap_sig_hdr {
uint8_t code;
uint8_t ident;
uint16_t len;
} __packed;
#define BT_L2CAP_REJ_NOT_UNDERSTOOD 0x0000
#define BT_L2CAP_REJ_MTU_EXCEEDED 0x0001
#define BT_L2CAP_REJ_INVALID_CID 0x0002
#define BT_L2CAP_CMD_REJECT 0x01
struct bt_l2cap_cmd_reject {
uint16_t reason;
uint8_t data[0];
} __packed;
struct bt_l2cap_cmd_reject_cid_data {
uint16_t scid;
uint16_t dcid;
} __packed;
#define BT_L2CAP_CONN_REQ 0x02
struct bt_l2cap_conn_req {
uint16_t psm;
uint16_t scid;
} __packed;
#define BT_L2CAP_CONN_RSP 0x03
struct bt_l2cap_conn_rsp {
uint16_t dcid;
uint16_t scid;
uint16_t result;
uint16_t status;
} __packed;
#define BT_L2CAP_CONF_SUCCESS 0x0000
#define BT_L2CAP_CONF_REQ 0x04
struct bt_l2cap_conf_req {
uint16_t dcid;
uint16_t flags;
uint8_t data[0];
} __packed;
#define BT_L2CAP_CONF_RSP 0x05
struct bt_l2cap_conf_rsp {
uint16_t scid;
uint16_t flags;
uint16_t result;
uint8_t data[0];
} __packed;
/* Option type used by MTU config request data */
#define BT_L2CAP_CONF_OPT_MTU 0x01
struct bt_l2cap_conf_opt {
uint8_t type;
uint8_t len;
uint8_t data[0];
} __packed;
#define BT_L2CAP_DISCONN_REQ 0x06
struct bt_l2cap_disconn_req {
uint16_t dcid;
uint16_t scid;
} __packed;
#define BT_L2CAP_DISCONN_RSP 0x07
struct bt_l2cap_disconn_rsp {
uint16_t dcid;
uint16_t scid;
} __packed;
#define BT_L2CAP_INFO_FEAT_MASK 0x0002
#define BT_L2CAP_INFO_FIXED_CHAN 0x0003
#define BT_L2CAP_INFO_REQ 0x0a
struct bt_l2cap_info_req {
uint16_t type;
} __packed;
/* info result */
#define BT_L2CAP_INFO_SUCCESS 0x0000
#define BT_L2CAP_INFO_NOTSUPP 0x0001
#define BT_L2CAP_INFO_RSP 0x0b
struct bt_l2cap_info_rsp {
uint16_t type;
uint16_t result;
uint8_t data[0];
} __packed;
#define BT_L2CAP_CONN_PARAM_REQ 0x12
struct bt_l2cap_conn_param_req {
uint16_t min_interval;
uint16_t max_interval;
uint16_t latency;
uint16_t timeout;
} __packed;
#define BT_L2CAP_CONN_PARAM_ACCEPTED 0x0000
#define BT_L2CAP_CONN_PARAM_REJECTED 0x0001
#define BT_L2CAP_CONN_PARAM_RSP 0x13
struct bt_l2cap_conn_param_rsp {
uint16_t result;
} __packed;
#define BT_L2CAP_LE_CONN_REQ 0x14
struct bt_l2cap_le_conn_req {
uint16_t psm;
uint16_t scid;
uint16_t mtu;
uint16_t mps;
uint16_t credits;
} __packed;
#define BT_L2CAP_SUCCESS 0x0000
#define BT_L2CAP_ERR_PSM_NOT_SUPP 0x0002
#define BT_L2CAP_ERR_SEC_BLOCK 0x0003
#define BT_L2CAP_ERR_NO_RESOURCES 0x0004
#define BT_L2CAP_ERR_AUTHENTICATION 0x0005
#define BT_L2CAP_ERR_AUTHORIZATION 0x0006
#define BT_L2CAP_ERR_KEY_SIZE 0x0007
#define BT_L2CAP_ERR_ENCRYPTION 0x0008
#define BT_L2CAP_ERR_INVALID_SCID 0x0009
#define BT_L2CAP_ERR_SCID_IN_USE 0x000A
#define BT_L2CAP_LE_CONN_RSP 0x15
struct bt_l2cap_le_conn_rsp {
uint16_t dcid;
uint16_t mtu;
uint16_t mps;
uint16_t credits;
uint16_t result;
};
#define BT_L2CAP_LE_CREDITS 0x16
struct bt_l2cap_le_credits {
uint16_t cid;
uint16_t credits;
} __packed;
#define BT_L2CAP_SDU_HDR_LEN 2
/* Helper to calculate needed outgoing buffer size */
#define BT_L2CAP_BUF_SIZE(mtu) (CONFIG_BLUETOOTH_HCI_SEND_RESERVE + \
sizeof(struct bt_hci_acl_hdr) + \
sizeof(struct bt_l2cap_hdr) + (mtu))
struct bt_l2cap_fixed_chan {
uint16_t cid;
#if defined(CONFIG_BLUETOOTH_BREDR)
/* Supported channels mask (first octet). Only for BR/EDR. */
uint8_t mask;
#endif
int (*accept)(struct bt_conn *conn, struct bt_l2cap_chan **chan);
struct bt_l2cap_fixed_chan *_next;
};
/* Register a fixed L2CAP channel for L2CAP */
void bt_l2cap_le_fixed_chan_register(struct bt_l2cap_fixed_chan *chan);
/* Notify L2CAP channels of a new connection */
void bt_l2cap_connected(struct bt_conn *conn);
/* Notify L2CAP channels of a disconnect event */
void bt_l2cap_disconnected(struct bt_conn *conn);
/* Notify L2CAP channels of a change in encryption state */
void bt_l2cap_encrypt_change(struct bt_conn *conn);
/* Prepare an L2CAP PDU to be sent over a connection */
struct net_buf *bt_l2cap_create_pdu(struct nano_fifo *fifo);
/* Send L2CAP PDU over a connection */
void bt_l2cap_send(struct bt_conn *conn, uint16_t cid, struct net_buf *buf);
/* Receive a new L2CAP PDU from a connection */
void bt_l2cap_recv(struct bt_conn *conn, struct net_buf *buf);
/* Perform connection parameter update request */
int bt_l2cap_update_conn_param(struct bt_conn *conn,
const struct bt_le_conn_param *param);
/* Initialize L2CAP and supported channels */
void bt_l2cap_init(void);
/* Lookup channel by Transmission CID */
struct bt_l2cap_chan *bt_l2cap_le_lookup_tx_cid(struct bt_conn *conn,
uint16_t cid);
/* Lookup channel by Receiver CID */
struct bt_l2cap_chan *bt_l2cap_le_lookup_rx_cid(struct bt_conn *conn,
uint16_t cid);
#if defined(CONFIG_BLUETOOTH_BREDR)
/* Initialize BR/EDR L2CAP signal layer */
void bt_l2cap_br_init(void);
/* Notify BR/EDR L2CAP channels about established new ACL connection */
void bt_l2cap_br_connected(struct bt_conn *conn);
/* Lookup BR/EDR L2CAP channel by Receiver CID */
struct bt_l2cap_chan *bt_l2cap_br_lookup_rx_cid(struct bt_conn *conn,
uint16_t cid);
/* Disconnects dynamic channel */
int bt_l2cap_br_chan_disconnect(struct bt_l2cap_chan *chan);
/* Make connection to peer psm server */
int bt_l2cap_br_chan_connect(struct bt_conn *conn, struct bt_l2cap_chan *chan,
uint16_t psm);
/* Send packet data to connected peer */
int bt_l2cap_br_chan_send(struct bt_l2cap_chan *chan, struct net_buf *buf);
#endif /* CONFIG_BLUETOOTH_BREDR */