This change adds IEEE802154_RAW_MODE support for the
cc1352r.
This allows using the cc1352r 2.4 GHz radio and Sub Ghz
radio as a transceiver (PHY) instead of using L2 networking.
Signed-off-by: Erik Larson <erik@statropy.com>
Use a common function to get the thread name.
There was no necessity in keeping sys_trace_thread_info() inline,
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The socket pairs created for this test when run under user mode are
accessible only from the thread that created them. Although it is
possible for that thread to grant access to another thread:
* there does not appear to be a way to do that when referencing a
descriptor rather than a pointer to a kernel object;
* there is no public API that supports granting the object rights to a
user thread that animates a work queue.
Until these gaps are addressed use the system work queue run
supervisor-mode threads to verify the asynchronous behavior of the
API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Change to spi_context_lock missed one spot in the flexcomm driver and
this causes a build issue. Pass spi_cfg to spi_context_lock to fix
the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Extends the Segger SystemView configuration for the tracing sample to
more platforms that support Segger RTT, not just nrf52840dk_nrf52840.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Extracts the Segger SystemView configuration for the tracing sample from
sample.yaml into a separate file. Increases the idle thread stack size
to fix overflows observed on i.MX RT boards. Removes
CONFIG_USE_SEGGER_RTT=y which is selected by CONFIG_SEGGER_SYSTEMVIEW.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures i.MX RT SoCs that support cacheable external SDRAM to use the
DTCM linker section for Segger RTT and SystemView data.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables optionally placing Segger RTT and SystemView data in the DTCM
linker section instead of the default data section. This is needed on
SoCs in the i.MX RT series that use cacheable external SDRAM to store
data.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Generating JSON report format without changing
the existing report formats.
JSON report is divided into three sections
environment tests are run
test cases basic info and discarded tests
after applying filters
Added the complete debug log to the report
Fixes: #26443
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
The test script http-get-file-test.sh will send a POST to inform
whether the test was ok or not. This is needed so that we can
test the TLS functionality properly, earlier use of netcat would
not do TLS handshakes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pass/fail return code was not returned to the caller in
Docker based testing so the runner script did not know if the
sample test passed or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pass/fail return code was not returned to the caller in
Docker based testing so the runner script did not know if the
sample test passed or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move actual test cases from the run-sample-tests.sh script to
the network samples directory that are supported by Docker based
testing. Each network sample directory that supports Docker testing,
will contain docker-test.sh script that is sourced by the runner
script. The docker-test.sh script will run the test as needed and
then return return value to the runner script.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the RX/TX thread priorities so that if cooperative priorities
are used, then lowest priority thread will have priority -1 which
is the lowest cooperative priority. The higest net thread priority
will depend on number of traffic classes but with max value 8,
the highest priority will be -8.
If preemptive priorities are used, then highest priority thread
will have priority 0, which is the highest preemptive priority.
In this case, the lowest thread priority will be 7 if there are
8 traffic classes.
The motivation for this change is that for cooperative priorities
we want to let other cooperative priority threads to run before
networking. But if preemptive priorities are used, we want
networking threads to run reasonably often compared to other
preemptive priority threads.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If networking pre-emptive thread priorities are enabled,
then use the proper macro to enable them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If networking pre-emptive thread priorities are enabled,
then use the proper macro to enable them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adjust the test thread priority so that the test / IP stack
has a chance to run and the test passes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let user to decide whether the RX/TX threads are run in either
co-operative or pre-emptive thread priority.
Default is co-operative threading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Discussion while adding the blackpill_f401ce board definition brought
up a few issues with the blackpill_f411ce board definition, which are
addressed in this commit:
* doc/index.rst had a typo
* support/openocd.cfg was incorrectly using the f4discovery profile,
which was fixed by using a custom profile for the SoC instead
* removed SoC from blackpill_f411ce.dts compatible line
* added support for jlink flash option
Signed-off-by: Kalyan Sriram <coder.kalyan@gmail.com>
Duplicates the existing blackpill_f411ce board definition for the
blackpill_f401ce board (WeAct Blackpill V3.0), which has identical specs
except for 84MHz clock (instead of 100Mhz) and 96K SRAM (instead of
128K).
Signed-off-by: Kalyan Sriram <coder.kalyan@gmail.com>
In test_pipe_user_thread2thread(), what should be tested is
the pipe, which allocated with k_object_alloc(), rather than
"pipe" and "kpipe". That two pipes are already teseted in
test_pipe_thread2thread().
Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
Put infrastructure for the following HCI commands/events in place:
* LE Setup ISO Data Path command
* LE Remove ISO Data Path command
* Configure Data Path command
* LE Set CIG Parameters Test command
* LE ISO Read Test Counters command
* LE ISO Receive Test command
* LE ISO Test End command
* LE ISO Transmit Test command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Periodic Advertising Set Info Transfer depends on Extended
Advertising and connections hence enclose the LE Periodic
Advertising Set Info Sync Transfer implementation inside
CONFIG_BT_PER_ADV and CONFIG_BT_CONN conditional
compilation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Periodic Advertising Sync Transfer depends on connections
hence enclose the LE Periodic Advertising Sync Transfer
Received Event code inside CONFIG_BT_CONN conditional
compilation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
currently pcie_get_mbar only returns the physical address.
This changes the function to return the size of the mbar and
the flags (IO Bar vs MEM BAR).
Signed-off-by: Maximilian Bachmann <m.bachmann@acontis.com>
The cast to k_ticks_t eliminates narrowing conversion warning from
uint64_t to int64_t if CONFIG_TIMEOUT_64BIT is enabled.
Signed-off-by: Martin Jäger <martin@libre.solar>
This new offset value in the dma config is made to
build the table of dma mux_channels with a dmamux.
Range depends on the nb of channels for selected dma instance
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Update nrf21540 DTS to support FEM configuration and update other pins
according to te board datasheet
Signed-off-by: Jakub Pegza <Jakub.Pegza@nordicsemi.no>
Currently there is no binding for RISC-V Core-Local Interruptor.
This patch add a simple binding.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Perform FIFO flush in write failure case
Perform full PECI HW block reset if multiple consecutive
failures are observed
Remove trailing \n from logging messages
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
A socket which didn't undergo completed connect() or accept() calls
should react with ENOTCONN to recv() call. This test checks both
a freshly created socket ("client" one) and a socket in LISTEN
state ("server").
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Because unoconnected stream socket doesn't have any chance to receive
any data, so a blocking recv() would hang forever on it (and does
without this change).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Zephyr SDK version 0.12 is distributed with SPARC cmake target support,
while version 0.11.3 and 0.11.4 need target.cmake from the Zephyr repo.
This commit has been tested with:
- zephyr-sdk-0.11.3 (currently used in CI)
- zephyr-sdk-0.11.4
- zephyr-sdk-0.12.0-beta-2
This commit is expected to be compatible with
- zephyr-sdk-0.12.0 (not yet released)
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Clarify that while any number of kernel objects can be created, there is
a limit which is set by the available RAM.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
RISC-V clint is an interrupt controller but it has no required
properties (#interrupt-cells and interrupt-controller).
This patch just adds missing properties.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
If a read is requested without a read buffer, the emulator currently
crashes. Fix this by adding a check.
Fixes: #29703Fixes: #29702Fixes: #29017Fixes: #29016
Signed-off-by: Simon Glass <sjg@chromium.org>
The SAM4L have a unique I2C driver. It shares simultaneously pins for
both master and slave controllers. Each controller have their own
instance. This introduces the TWIM controller that handles only the
master part.
The TWIM controller uses no copy and the driver was prepared to work
with both 7 and 10 bits address. The controller can handler up to 256
bytes for a single transfer allowing long data communication with
almost no CPU intervention.
The driver was wrote specifically to Zephyr. It receives a transfer
list of from upper layers to a specific device on the bus. It programs
the first and second transfer, if it exists, before start. At end of
full read/write interrupt, will program the next data block. This
process repeats until all transfers be executed. The driver uses
interrupt from TWIM to check for erros or program next tranfer.
Future work can enable low power mode on the driver allowing long
transfers with low power consumption.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
