net_pkt_alloc_with_buffer() takes IP header and protocol header
length while calculating total length internally. Need not
specify explicitly. Also mutex was not properly initialized.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As per RFC2131 4.1.1 requires we wait a random period
between 1 and 10 seconds before sending the initial
discover. But tests can not wait that longer. So this
option helps test to configure the value to minimum.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add useful information to the error message printed when the installed
SDK does not fulfill version requirements.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
The mbedtls library has some globals which results in faults
when user mode tries to access them.
Instantiate a memory partition for mbedtls's globals.
The linker will place all globals found by building this
library into this partition.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some init tasks may use some bss app memory areas and
expect them to be zeroed out. Do this much earlier
in the boot process, before any of the init tasks
run.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Based on the definition of _ARCH_THREAD_STACK_DEFINE() macro
for ARM, the MPU Stack Guard region is placed inside the
allocated stack object, only if
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT and CONFIG_USERSPACE
are both set. For ARM stack objects, allocated using the
_ARCH_THREAD_STACK_DEFINE() macro, such as the threads' stacks
and the interrupt stack, the above must be reflected on how we
set the initial start of the stacks.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Previously, _prf function was used when present and _vprintk
was used otherwise. _prf supports reacher formatting but at
cost of 3k flash and >250 bytes on stack. Stack usage then
depended on which function was used and that was causing
troubles when trimming stack sizes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
No Kconfig symbol called NET_GPTP_STACK_SIZE has ever been defined in
the Zephyr repo. Drop the CONFIG_* prefix from the #define.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Converts the rv32m1 timer driver to use 'DT_' prefixed defines instead
of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 pinmux driver to use 'DT_' prefixed defines instead
of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 interrupt controller driver to use 'DT_' prefixed
defines instead of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 clock control driver to use 'DT_' prefixed defines
instead of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 gpio driver to use 'DT_' prefixed defines instead of
deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The LwM2M public APIs were never well documented. Let's fix
that by adding the needed information to include/net/lwm2m.h
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/12958
Signed-off-by: Michael Scott <mike@foundries.io>
Check the return value of mayfly_enqueue() and assert if not successful.
Coverity ID: CID 190991
Fixes#13833.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Inside ll_test_end(), result of lll_clk_off() is not checked
which might result in releasing resources acquired for radio.
Coverity-CID: 190954
Fixes: #13861
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
This example combines 2 HID classes and 2 CDC ACM classes to create
a composite, multi-instance device.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Added macro that generates simple report descriptor for keyboard.
Added enums for standard button codes, keyboard modifiers
and keyboard LEDs.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Avoids having it look like a Kconfig symbol reference (which gets
detected by an upcoming CI check).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
To match the signature of k_thread_name_get(), add a const modifier to
the local variable definition.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We were reporting results twice, something that might confuse test
systems and end up reporting wrong results. Assert if any self-tests
have failed and report at the very end.
Disable test on x86_64.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We sometimes want to join a device to OpenThread mesh automatically.
This commit adds supports to do by Kconfig.
The default of CONFIG_OPENTHREAD_JOINER_PSKD is based on this page:
https://codelabs.developers.google.com/codelabs/openthread-hardware/
Signed-off-by: Takumi Ando <takumi.ando@atmark-techno.com>
Reduce unnecessarily large images of boards (> 1MB)
Also fixed typo in doc title for mec2016evb_assy6797
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The creation of the udev rule requires the user to be root else
it will fail. Update the text of the documentation to make it clearer
and change the shell prompt of the command to '#'
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
When re-running failed tests, do not go through any filtering, just load
the failed tests directly and execute them. The filtering was done based
on default platforms and any tests that were failing on non-default
platforms were ignored.
Fixes#13956
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is useful when running the script locally on a set of commits to
reproduce how things are run in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These tests fail on hardware. An appropriate issue will be filed on
GitHub, but it doesn't make sense to hold the CI from going green.
Fixes#13960.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Added an assert in the logger thread in case there
is no backends, instead of having that thread spinning
forever. Disabled log in qemu_xtensa board due to lack
of backends.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We used to leave byte-long placeholder symbols to ensure
that empty application memory sections did not cause
build errors that were very difficult to understand.
Now we use some relatively portable inline assembly to
generate a symbol, but don't take up any extra space.
The malloc and libc partitions are now only instantiated
if there is some data to put in them.
Fixes: #13923
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The GCOV section is programmed as a static MPU region, only
in builds with support for User Mode, otherwise it is not
programmed into an MPU region at all. To reflect this in the
linker, the MPU-alignment for GCOV section is enforced only
under CONFIG_USERSPACE=y. Otherwise, single-word alignment
is enforced.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The settings tests was not properly covered in terms of maintainership,
add maintainers for the corresponding subystems.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It was possible via Kconfig to assign any partition for FCB using
its number. Partitions flash_area_id becomes non predefined
(are auto-generated). So it is possible only to guess which
number will be signed to certain area.
Unfortunately it is not possible to transfer FLASH_AREA_XXX_ID
label via Kconfig.
Patch assigns settings to the storage partition and remove
SETTINGS_FCB_FLASH_AREA property from settings Kconfig.
fixes#13388
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
mdm_receiver_send() was sending 1 too many bytes of buf. This ended
up being the NULL terminator. Size should be reduced prior to the
while check so that this doesn't happen.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/14001
Signed-off-by: Michael Scott <mike@foundries.io>
This part of tests was forgotten when we move to subsys/
Fixes#13729
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the basic tests trigger LEDs or expect button press and would
hang in device testing because we can't parse success or failure from
the console. Define harness for this with the intent to skip those in
sanitycheck device testing and until we have a better way to test those.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
