On new SoCs, certain pins need to enable the clock setting on the pin
for it to work properly. For now, this has been handled internally in
the pinctrl driver, however, it appears to be an instance-specific
property (e.g. UARTE/SPIM instances in the fast domain do not require
such setting). Move the configuration of this settings to DT, the best
place where to have instance-specific hardware settings.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Some UARTE instances may be clocked at higher speeds than 16MHz, so the
baudrate setting needs to be scaled accordingly. This patch parses the
`clocks` property and obtains the clock-frequency property of the
associated clock, assuming it is a fixed-clock. We should ideally have a
proper clock control subsystem where frequency can be queried using an
API, but we're far from there.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
HSFLL120 is a clock used by fast peripherals, and it is controlled by
the system controller. From an application perspective, it is a fixed
clock. Note that it has multiple outputs (clk_main @ 320MHz, and
clk_main2|4 which provide the main clock divided by 2 and 4,
respectivelu). Only the main frequency is represented for now.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Programming of the MLCS register was performed on the incorrect bits.
Additionally, saving the new version did not erase the previously set
value, which could result in an incorrect register value.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Wi-Fi sample is stack heavy, so, by default increase the stack sizes to
work with any driver, esp. those use WPA supplicant like nRF Wi-Fi.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Wi-Fi shell prints scan results to the console taking time and this puts
pressure on net_mgmt Queue, so, increase both timeout and Queue depth to
handle crowded Wi-Fi channel (~200 APs).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These shields in the Arduino form factor can be mounted on supported
boards and can provide Wi-Fi6 capability.
Base shield is nRF7002, with variants as nRF7001 (2.4GHz only) and
nRF7000 (dual band scan only).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Driver for Nordic nRF70 Wi-Fi6 companion chipset, depends on
hal_nordic/nrf_wifi for OS agnostic part of the driver.
This supports (Q)SPI interface to communicate from host to chip.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The repo-path field is meant to override the repository name if it's
different than the module name, drop two cases where repo-path has no
effect.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The CST816D touch chip is similar to the CST816S, with the primary
difference being the chip ID. This commit extends the existing
CST816S driver to support the CST816D by adding its chip ID. There
are no other modifications.
Signed-off-by: Shang Xiangyao <shxyke@gmail.com>
For commonly-accessible I2C nodes, status and pinctrl are now set in
board dts. Remove these properties from test overlay files.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Enable commonly-used I2C in ADI MAX32 boards by default to access I2C
functionality without having to create an additional overlay file.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Some offloaded ifaces have an L2, but lack support for
net_l2->send. This edge case is not handled by
net_if_send_data, resulting in a NULL dereference under
rare circumstances.
This patch expands the offloaded iface guard in
net_if_send_data to handle this edge case.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Added a sample application demonstrating how to use the coap_client API
to download a resource via GET request.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
It looks like both cpuapp/cpunet cores share the same definitions for
LEDs, buttons and Arduino connector. This patch puts these repeated
definitions into a single shared file.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fixes issues with net_ptp_time arithmetic where second
overflow/underflow would not be handled properly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Offset should be *subtracted* from current clock value, not added.
This was causing clock to accumulate error instead of actually
"converging".
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The test `storage.flash_map.mpu` for `nrf52840dk/nrf52840` fails
althought the output is correct. Time to test execution is not enough.
This change extend test execution timeout.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Inform users about Kconfig options deprecation and show what is the
alternative with some examples.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
nRF53X HV regulator differs from eg nRF52X as it offers a silent mode
option. For this reason, a new compatible is used, even if now such
capability is not exposed yet.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
In addition to Kconfig options (soon to be deprecated), allow
configuring the regulators using DT.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The SoC main supply is part of the POWER IP block. The POWER IP is a
kind of multi-purpose block, so each of its functions is described as a
child node in DT, like similar other MFD. This allows to have specific
properties, e.g. for DC/DC mode.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Some Nordic SoCs, like nRF52 contain an internal regulator for the main
SoC supply. Depending on the SoC, the regulator can have multiple
configurations (e.g. single/double stage), which mainly depends on
supporting "high-voltage" mode or not (VDDH pin supply). This patch adds
bindings for nRF5X regulator and nRF52X HV regulator.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
When presenting an example of how to run a failing test case with
`west build`, provide the source dir path relative to the current
working directory, not the zephyr root directory.
Signed-off-by: Jordan Yates <jordan@embeint.com>
For 2.4GHz and 6GHz bands, while counting the channels in configured
range, start of the range is being counted twice. Correct this
by advancing the index by 1 while counting channels in range.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
The WeAct STM32F405 Core Board is an extremely low cost and bare-bones
development board featuring the STM32F405RG, 64-pin variant of
the STM32F405x series.
Signed-off-by: Pavlo Yadvychuk <pyadvichuk@gmail.com>
Flexible arrays are arrays declared without a specific size, e.g:
uint8_t my_array[];
They are widely used as as last member in structs that are dynamically
allocated.
Since C99 they are part of the C standard, but for historical reasons
many places still use an older GNU extension that is declare zero
length arrays.
Although zero length arrays are flexible arrays, we can't blindly
replace [0] with [] because of some syntax limitations. This macro
workaround these limitations while get rid of this non standard
extension.
Using true flexible arrays allows the compiler to calculate the size
of the array better and improve potential issue checking.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
It is safer to base the SUIT artifacts path on the path of the
configuration file than the HEX file that is being flashed.
The latter may be overriden by several scripts that merge/transform the
final firmware image.
Signed-off-by: Tomasz Chyrowicz <tomasz.chyrowicz@nordicsemi.no>
lwm2m.h was missing the extern "C" block
and it used a forward declaration to an enum,
which is illegal in c++.
Signed-off-by: David van Rijn <david@refractor.dev>
Remove the logic from the board level about overriding the
flash load size and instead just select to use the DT code
partition if app is not expected to be able to occupy the
whole flash space because of the firmware image being
loaded separately.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
