Fix issue with TFM signing of images not using the correct imgtool.
The wrapper command expects the mcuboot scripts folder to be the
current working directory when called in order to find its own
version of imgtool.
Since the command is using a different current working directory
this is not found and the system imgtool is used instead.
This causes the commands to be run with 2 different version of imgtool
if the system imgtool is found and does not have any issues.
The system imgtool could not be installed or have compatibility issues
as 1.7.2 version of imgtool is currently required by the wrapper script
Fixes: #40254
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Andes developers, kevinwang821020 and jimmyzhe as reviewers for
andes_v5 soc, board, dts, and drivers.
Remove Teng-Shih-Wei from reviewers because he doesn't maintain
Zephyr RTOS currently.
Signed-off-by: Jim Shu <cwshu@andestech.com>
This change is supposed to fix the issue of incomplete acl mtu
initialization in the absence of BREDR. Find further information here:
https://github.com/zephyrproject-rtos/zephyr/issues/39549
Signed-off-by: Tobias Scharnowski <tobias.scharnowski@rub.de>
For consistency we run the gatt and gap tests also with the new
LLCP. The test lists for legacy and new LLCP are identical
and therefor no separate test lists have been introduced
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Test is using logging in a different way and flushing logs
after each test case would not work.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When deferred mode is used, logging is using lowest priority
thread to process the logs. When test cases are performed one
by one processor never reaches lowest priority thread until
whole suite is completed. Added flushing after each test case.
Feature is optional (by default enabled).
CONFIG_TEST_LOGGING_FLUSH_AFTER_TEST=n to disable.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add function which can be used to check if there is any pending
data to process. It can be used to determine if deferred logging
has completed processing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove LOG_MINIMAL kconfig option which was confusing
since LOG_MODE_MINIMAL existed. LOG_MINIMAL was used to
force minimal mode but because of invalid dependencies
it was leading to issues.
Refactored code to use LOG_MODE_MINIMAL everywhere and
renamed LOG_MINIMAL to LOG_DEFAULT_MINIMAL which has impact
on defualt logging mode (which still can be later changed
in conf file or in menuconfig).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
- refactors cache initialization functions by moving it from
soc.c and placing it in soc_cache.c
- moves SPIRAM's bss zeroing before SPIRAM initialization
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
It does not make sense to use branch coverage with macro LOG_ERR().
It is still covered with line coverage.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Increase test coverage with simulation of reading IBECC_ECC_ERROR_LOG
and IBECC_PARITY_ERROR_LOG.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This rework module hal_gigadevice to be compliance with rule
that requires firmware libraries directories names be lowercase.
This rule was created at hal_gigadevice/README and it is not
a Zephyr general rule. This only affect how hal_gigadevice is
used.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Rename the mockup file from ull_periph.c into ull_peripheral.c
so that it has the same name as its equivalent in the BT
controller
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
After removing the "type" and "dval" members, the documenation still
referred to these fields. This commit removes the paragraph
about checking the type of values returned from sensor.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
It will unlock and unhold the CS line. Note that the lock and the CS
being hold on are 2 separate config bits, so if only one is selected
spi_release() will only apply on this configuration.
Note: this has been already the case in the controller drivers, where
there implementation of spi_release() calls
spi_context_unlock_unconditionally(). And that function always forces
the CS line to an inactive state.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
replace with version.parse from packaging module.
prevent this warning message:
DeprecationWarning: The distutils package is deprecated
and slated for removal in Python 3.12. Use setuptools or
check PEP 632 for potential alternatives
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Process issues are tracked and do not need to be automatically made
stale.
Suggested-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Limit the maximum ACL Tx buffer size to 251 octets due to
implementation restricted use of uint8_t for PDU len field,
also used as the Tx buffer size data type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If IUT is acting as a central device and peer lost bond we need
to re-pair to restore bond. PTS is not sending any WID for this
so bonding needs to be initiated implicitly by IUT.
This was affecting GAP/SEC/AUT/BV-25-C qualification test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
boilerplate.cmake contained a comment referring to CMake 3.13.1 but
minimal required version is 3.20, so update the comment to 3.20.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Change the "yes/no" value to "true/false".
Otherwise pykwalify 1.8.0 will report below errors:
- Value: 'no' for required keyword must be a boolean:
Path: '/mapping/common'>
- Value: 'yes' for required keyword must be a boolean:
Path: '/mapping/sample/mapping/name'>
Signed-off-by: Shao Ming <ming.shao@intel.com>
1.Putting the PWM_CHANNEL_X, PWM_PRESCALER_CX information
in the description.
2.Use the common definition EC_FREQ.
3.Use the common macro IT8XXX2_DT_ALT_ITEMS_LIST.
4.Stop using DRV_CONFIG, DRV_REG macro.
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
Fix compile warning filling 24-bit value in 3 octets using
sys_put_le32, used sys_put_le24 instead.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove misplaced declaration of ll_tx_ack_put in
ull_internal.h file while it is already present in
ull_conn_internal.h.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Users will have to include dt-bindings/spi/spi.h in order to use the
relevant flags fol this property. For instance:
...
duplex = <SPI_HALF_DUPLEX>;
....
By default all SPI device are configured to be full duplex so the
property is optional. This property makes sense only for devices that
can be configured on either modes. Which, in such case, it will need to
use DT_INST_PROP(<instance number>, duplex) macro call to retrieve the
property value. Others can fully ignore it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
HTS221 is a humidity and temperature sensor (thus HTS) that can be wired
on i2c or SPI bus. On SPI bus however, it uses the 3-wire mode, aka:
half-duplex.
Now that SPI API exposes half duplex operation, let's enable the SPI bus
on that sensor.
Let's move to a better DTS integrated driver as well, and also use
stmemsc interface.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to expose half/full duplex configuration option on regular
configuration. So far, dual/quad/octal are not exactly supported, as it
would require extensions to the SPI buffer for a full support.
So moving these modes to an extended operation attribute
(32 vs 16 bits), disabled by default.
And exposing half/full duplex configuration bit. Full duplex being the
default option.
Fixes#19134
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Increase main stack size (in 128 bytes) to make these tests run
successfully on qemu_x86 platform.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
