e8e88dea incorrectly changed registers
used in `sys_clock_cycle_get(32|64)` functions.
This commit fixes that.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
In order to bring consistency in-tree, migrate all dts code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds addresses and names for individual CSR registers to device tree.
This way liteuart driver no longer depends on CSR data width being 8
bits.
Also when register names or their number changes, then overlay generated
by LiteX will be incompatible with one defined here.
This should make finding breaking changes easier.
I also appended `_ADDR` suffix to defines, to distinguish them from
normal values like `LITEETH_EV_RX`.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
Adds addresses and names for individual CSR registers to device tree.
This way liteuart driver no longer depends on CSR data width being 8
bits.
Also when register names or their number changes, then overlay generated
by LiteX will be incompatible with one defined here.
This should make finding breaking changes easier.
I also appended `_ADDR` suffix to defines, to distinguish them from
normal values like `UART_EX_TX`.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
Adds addresses and names for individual CSR registers to device tree.
This way timer driver no longer depends on CSR data width being 8 bits.
Also when register names their number changes, then overlay generated by
LiteX will be incompatible with one defined here.
This should make finding breaking changes easier.
I also updated register names to those used in current LiteX and
appended `_ADDR` suffix to defines which lacked them.
Because register `total` was renamed to `value` and `update_total` to
`update_value` I updated variables accordingly as well.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
The OpenISA RV32M1 pinctrl groups need a dummy pinctrl node to populate
with pinctrl options at the board level.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Changes signature so it takes uint32_t instead of pointer to a
register.
Later `sys_read*` and `sys_write*` functions are used, which cast
given address to volatile pointer anyway.
This required changing types of some fields in LiteX GPIO driver and
removal of two casts in clock control driver.
There was a weird assert from LiteX GPIO driver, which checked whether
size of first register in dts was a multiple of 4.
It didn't make much sense, so I removed it.
Previous dts was describing size of a register in terms of subregisters
used. New one uses size of register, so right now it is almost always
4 bytes.
Most drivers don't read register size from dts anyway, so only changes
had to be made in GPIO and clock control drivers.
Both use `litex_read` and `litex_write` to operate on `n`bytes.
Now GPIO driver calculates this `n` value in compile time from given
number of pins and stores it in `reg_size` field of config struct like
before.
Registe sizes in clock control driver are hardcoded, because they are
tied to LiteX wrapper anyway.
This makes it possible to have code, independent of CSR data width.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
The PWM period cell will soon be required by the pwm_dt_spec facilities.
This patch adds support for it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to be consistent with other platforms, include the PWM
dt-bindings by default.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The PWM period cell will soon be required by the pwm_dt_spec facilities.
This patch adds support for it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to be consistent with other platforms, include the PWM
dt-bindings by default.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The pinctrl support made usage of the 'peripheral'
property no longer required.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
to support implementation and peripheral usage of the pinctrl
driver API.
Removes deprecated "use-iomux" property from the SPI node.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Add the period cell to GD32 PWM compatible and update all boards
accordingly. A period of 20 ms (50 Hz) has been set for all PWM LEDs.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rather than specify input clock for each peripheral individually, instead
specify the relevant clocks in DTS.
This will enable easier support for non-default coreclk on fe310 in a
follow-up CL.
Signed-off-by: Shawn Nematbakhsh <shawn@rivosinc.com>
Customize busy wait timer for micro-seconds accuracy.
Verified by follow test pattern:
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_api
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_error_case
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_monotonic
west build -p auto -b it8xxx2_evb tests/kernel/timer/starve
west build -p auto -b it8xxx2_evb tests/kernel/context
west build -p auto -b it8xxx2_evb tests/drivers/adc/adc_api
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
Enable the alt function with setting both bit5@0xf016f1 and
bit6@0xf02046 bits will cause internal leakage.
Only bit6@0xf02046 bit is required to enable the alt function,
so fix it.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
This commit makes the transition from the pinmux driver to the pinctrl
driver. It also modifies UART, SPI and I2C drivers used in FE310-based
boards to use the new pinctrl API.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
As mentioned in #42882, the I2C of IT8XXX2 is designed for two different
IP blocks, so this PR divides this I2C driver into two compatibles.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The ADC driver of IT81302 chip can support channels 0-7 & 13-16.
This PR adds to implement ADC channels 13-16.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This enables the below configuration so the AP and EC are able to
communicate over eSPI:
CONFIG_ESPI_PERIPHERAL_EC_HOST_CMD
CONFIG_ESPI_PERIPHERAL_ACPI_SHM_REGION
CONFIG_ESPI_PERIPHERAL_CUSTOM_OPCODE
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
This patch adds GPIO and 96board LS (Low Speed)iexpansion connector
support for SiFive HiFive Unleashed and also enables GPIO basic test.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
