Include building the init tests with the new Link Layer
split architecture.
Has the data length update and controller privacy disabled
until they are implemented in the new architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ensure that changes to DeviceTree sources cause CMake to be re-run
when make/ninja is invoked.
Note that this is not perfect, as it does not cover files that are
\#included, but it will cover most DT changes.
This fixes#12692
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The header comment in 'generated_dts_board_unfixed.h' was including
'compatible' as a helpful text.
But something has been broken with how we extract 'compatible' because
it was being evaluated to 'q'. Giving a confusing header text:
Generated include file q
Since the mechanism is broken, and does not appear to be important, we
remove it.
Also, modernize how we generate multi-line strings.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
extract_dts_includes.py has been generating DT output and then
concatenating it with fixup header files to create
'generated_dts_board.h'.
In this patch we instead introduce a source file named
'generated_dts_board.h' and have it \#include the appropriate DT
output and fixup files.
This results in a simpler system because users can now read
'generated_dts_board.h' as C source code to see how fixup files and
generated DT output relate to each other. Whereas before they would
have to either read documentation or python code to gain the same
understanding.
Also, it reduces the scope and complexity of one of our most bloated
python scripts, extract_dts_includes.py.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Basic test for poll() behavior. UDP sockets are used for simplicity
so far (poll-related paths for UDP and TCP are similar, though later
adding TCP explicitly for full coverage may be useful).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that we should have many, many tests. The only reasonable
way to achieve that is by making tests easy and pleasant to write,
and that requires common, easy to reuse infrastructure.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. Consistently use prepare_sock helpers.
2. Test not just client->server sending, but sending reply.
3. Send large packets (>1 net_buf fragment), not just small.
4. Check POSIX behavior on recv()ing datagram incompletely (the rest
should be discarded and next recv() should read next datagram.
5. More cleanroom testing, e.g. explicitly reinitialize input params
on each call (without assumptions that they're left with suitable
values from previous calls), clear input buffers before each read
operations, etc.
6. Reformat code. Previously it was very sparse, giving long test
functions, and thus impression that tests are complicated and hard
to write.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In OpenThread RLOC address and ALOC address are used for internal mesh
routing and should not be used by applications as they can change
dynamically during runtime. Therefore prevent registering them on Zephyr
interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
dtc 1.4.6 doesn't support the -Wno-unique_unit_address flag. We need to
check that the flag is supported before using it on pre dtc-1.4.7
versions.
Fixes#12685
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Continuation of a bullet list item wasn't indented properly, causing a
new list to be started (with odd indentation).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This change adds an email alias for Code of Conduct reports and
identifies the recipients of reports.
Signed-off-by: Thea Aldrich <aldrich.thea@gmail.com>
This change adds a Code of Conduct based on
https://www.contributor-covenant.org/. Additional reporting and
enforcement guidelines will be added at a later date.
Signed-off-by: Thea Aldrich <aldrich.thea@gmail.com>
If we are setting the code to be in HyperFlash (CONFIG_CODE_HYPERFLASH)
or QSPI (CONFIG_CODE_QSPI) we should enable
CONFIG_NXP_IMX_RT_BOOT_HEADER.
Update mimxrt1064_evk to use select like other boards.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Depending on the installed and enabled SDK, we now load the right
configuration allowing people to migrate gracefully to the new SDK.
The selection is done based on the version of the SDK. Minimal required
SDK is still kept as 0.9.5.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Complete code factorization in stm32 exti drivers.
Add return value in case line is not implemented.
Except returned error code, refactor has been done iso-feature
compared to previous code. Hence error is reported only when
support was not available on previous series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This sample is made to demonstrate use of x-nucleo-ik01a2 shield.
It requires a board with Arduino i2c where it can be plugged on.
The sample has been tested on Nucleo F401RE board.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add LSM303AGR ecompass (accelerometer + magnetometer) sensor support.
The LSM303AGR accelerometer and LSM303AGR magnetometer are s/w
compatible with respectively LIS2DH and LIS2MDL sensors and can
share same driver with those sensors.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use Kconfig named choice for TRIGGER_MODE in order to easy
up the trigger mode selection in default configurations
for boards using this sensor driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The PLLR parameter in LL_RCC_PLLI2S_ConfigDomain_I2S() API should
be selected among the following list of (already shifted) values:
* @arg @ref LL_RCC_PLLI2SR_DIV_2
* @arg @ref LL_RCC_PLLI2SR_DIV_3
* @arg @ref LL_RCC_PLLI2SR_DIV_4
* @arg @ref LL_RCC_PLLI2SR_DIV_5
* @arg @ref LL_RCC_PLLI2SR_DIV_6
* @arg @ref LL_RCC_PLLI2SR_DIV_7
This commit fixes PR #12609.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Revert 71ba2de7:
ext: stm32cube: stm32f4xx: shift I2SR field in PLLI2SCFGR register
(ST Bug tracker ID: 50086)
Revert 9a893202:
ext: stm32cube: stm32f7xx: shift I2SR field in PLLI2SCFGR register
(ST Bug tracker ID: 50108)
This two commits were introduced to shift the PLLR parameter according
to the PLL register field position. After analysis, it appears that
function is actually correct, and issue was actually in parameters
provided that didn't match the API. (see PR #12609)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
struct timeval is per POSIX defined in sys/time.h, but that also
allowed to pull sys/select.h (and indeed, it does with native_posix),
which then starts to conflict with out select implementation (if
NET_SOCKETS_POSIX_NAMES is defined, and many samples/tests have it).
So, for now follow the existing route of duplicating all definitions
needed by our code in namespaced manner. Things like struct timeval
usage will need to be revisited later, when we'll want socket
subsystem to work with POSIX subsystem, but that's a separate deep
matter.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's implemented on top of poll() anyway, and the current
implementation of fd_set uses array of fd's underlyingly, which
leads to O(n) complexity for FD_SET() and friends.
The purpose of select() implementation is to allow to perform
proof-of-concept port of 3rd-party code to Zephyr quickly. For
efficiency, poll() should be used instead.
Fixes: #11333
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We get the following warning:
extract_dts_includes.py: WARNING: id field set in
'SMSC/Microchip LAN9220 Ethernet controller', should be
removed.
Removed the id: field to fix.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Instead of having kernel APIs documentated in a separate page, move the
API references to the object pages and have everything in one place.
Remove the intermediate category page and list all section under the
kernel directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added cpu_idle APIs to a doxygen group, otherwise there were missing
from the project documentation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The top border on function names and other doxygen items made
documentation very difficult to read. Remove the top border and make the
auto-generated docs readable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When referencing files from the git tree create a link to the file for
easy browsing of header files and other files of interest.
Borrowed from esspresif/esp-idf project and modified for Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
