Reduced the size of tx_buffer_def array to 1 to save
on function stack memory. Here only 1 buffer is
enough to call the transmit function.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Modify the ethernet driver to use TX complete interrupts.
Adds HAL ethernet TX complete callback and locking semaphore.
Due to changing behavior/content of the TX DMA descriptors
on STM32H7 series, based on the state of the IP,
it is more reliable to wait for the TX complete interrupt to check
for DMA end of transmission event. This avoids polling the
DMA_DESC_OWN bit in the descriptors.
Improves reliability and performance of the ethernet peripheral.
Tested on CoapServer sample, Dumb HTTP server, telnet sample.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Typically we have ARC core configurations where Fast IRQs (FIRQ) are
enabled together with multiple register files and those we have covered
by testing. But FIRQ & single register bank we only happen to have on
the older EMSK v2.2.it might be a good idea to add a similar
configuration to nSIM "boards" so that we keep it tested regularly.
nsim_em7d_v22 configuration is similar with em_staterkit_em7d_v22,
both configed with FIRQ & single register bank.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Compile with arm-none-eabi-g++ (10.2.0 with -std=c++17) generates a
warning for every C++ source file:
"cc1plus: warning: command-line option '-Wno-pointer-sign' is valid for
C/ObjC but not for C++"
Get rid of those warnings by adding '-Wno-pointer-sign' to the list of
excluded CXX options.
Signed-off-by: Rihards Skuja <rihardssk@mikrotik.com>
Use platform_allow instead of platform_exclude, as the test depends
on specific boards. A new board with DAC support should not be added
to this test automatically.
Signed-off-by: Martin Jäger <martin@libre.solar>
Assuming we stay on default Power Scale 1,
overdrive is required when System Core Clock frequency is higher
than 180MHz.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Fixes: #26112
All file paths provided on the list of overlay files are converted to
CMake style paths.
This ensures that even paths with mixed style `\` and `/` on Windows are
treated correctly. This fixes the issue where the deps file created
would cause ninja to re-invoke CMake in an endless loop on windows.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Most drivers make use of the HW semaphore (see `stm32_gpio.c`), but the
HSEM clock isn't currently setup on the MCU side. This means we rely on
the MPU to enable this clock, which is an unsafe bet: the OS running on
the MPU may not have support for HSEM, or it might enter sleep state,
which will disable the clock. As a consequence, firmwares loaded from
the MPU running this OS will block on the first `z_stm32_hsem_lock()`
call.
As it is required to run anything on the MCU core, we shouldn't assume
the HSEM clock is already active when booting and enable it in the SoC
init, the same way it is done for the STM32H7.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
There is a bug in OpenOCD which prevent to flash the bank2
of nucleo_l152re: http://openocd.zylin.com/#/c/5829/
Waiting for official fix, here is a workaround.
TODO: To be reverted once official fix is merged and available in
Zephyr.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
In some cases it is useful to use the C preprocessor to control the
content of a devicetree file. A specific use case is in testing,
where different combinations of node properties must be checked.
Provide a mechanism to allow arbitrary preprocessor flags to be passed
through CMake to affect the devicetree content.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Memory mapping, for now, will be a private kernel API
and is not intended to be application-facing at this time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We no longer plan to support a split address space with
the kernel in high memory and per-process address spaces.
Because of this, we can simplify some things. System RAM
is now always identity mapped at boot.
We no longer require any virtual-to-physical translation
for page tables, and can remove the dual-mapping logic
from the page table generation script since we won't need
to transition the instruction point off of physical
addresses.
CONFIG_KERNEL_VM_BASE and CONFIG_KERNEL_VM_LIMIT
have been removed. The kernel's address space always
starts at CONFIG_SRAM_BASE_ADDRESS, of a fixed size
specified by CONFIG_KERNEL_VM_SIZE.
Driver MMIOs and other uses of k_mem_map() are still
virtually mapped, and the later introduction of demand
paging will result in only a subset of system RAM being
a fixed identity mapping instead of all of it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Stack overflows where seen in heavy logging conditions since printk
modifications that increased "slightly" RAM consumption
(973487fdad).
Increase RX Thread stack size to avoid these overflows.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Make similar fix for faze board to use ${KERNEL_BIN_NAME} and
${KERNEL_HEX_NAME} variables as its possible to rename the executable
binary via CONFIG_KERNEL_BIN_NAME.
This fixes tests/misc/test_build/buildsystem.kconfig.utf8_in_values
Fixes#28013
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added, build only, native_posix_64 board to sample.yaml file.
This will cover both compilation of the SDL display driver and
kscan driver.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Add support for UARTs 3-6 to the stm32f030xc SoC. These additional UARTs
share a single interrupt line, so only one may be enabled at a time.
Signed-off-by: Brian Kubisiak <brian@kubisiak.com>
Flash memory can be write but there is no way to check flash integrity.
Add flash_img_check method that verify flash integrity. This is useful
to avoid firmware reboot and test. Another use is ensure that firmware
upgrade routines from internet server to flash slot are performing
properly. This uses flash_area_check_int_sha256 method to check a
SHA-256 hash. On sucess match, zero is returned, otherwise a negative
errno value.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add SHA-256 flash integrity method. It reads flash data from a
device giving an offset creating a SHA-256 hash to be compared
with a reference. On sucess match, zero is returned, otherwise
a negative errno value.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Colorama needs to be initialized, and for colors to display correctly on
Windows one needs to use the `USES_TERMINAL` option in CMake.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Certain symbols do not contain a valid path, instead showing
`<built-in>` in the filename attribute. This leads to the resolve() call
failing on Windows, since the `<>` characters are not allowed in
filenames there. Fix this by catching the exception and skipping the
call in that case.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When this code was moved from a standalone sample to an optional shell
feature the documentation on how this works and caveats was lost. Put
it back so it can be referenced in issue explanations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When lazy loading of CCCs are enabled there is no settings set handler
register for the 'bt/ccc' key, this means that the settings set handler
for 'bt' key is called instead. This handler does not know what to do
for the 'ccc' subkey, and returns -ENOENT for the entry.
This results in an error message logged by the settings subsystem.
"E: set-value failure. key: bt/ccc/f8c39e2f98210 error(-2)"
Fix this by providing an empty handler for the 'bt/ccc' key when
Lazy Loading feature is enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Receiver part reworked to not block in interrupt and rely on assumption
that uart_fifo_read is capable of reading incoming data from the HW.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix periodic advertising delete implementation, to not
NULL the callback pointer when deleting the instance so
that the application's terminate callback can be called
thereafter.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This new option allows to include `sockets_tls.c` into the build when
socket offloading is enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Given that the offloaded poll handling differs from the poll handling of
native sockets (entire poll function call is offloaded), some
adjustements were needed to make TLS socket work with offloaded poll
calls.
To achieve this, in case socket offloading is used, instead of jumping
directly to the offloaded poll call, a TLS wrapper for the offloaded
poll will be called. This wrapper will do additional checks at the
mbedtls level, to verify that the event is only notified to the caller
when the application data is available (i. e. not to report events
during handshake or when partial data is received, not ready to
decrypt).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Given that TLS/DTLS socket now creates an underlying TCP/UDP socket, the
FD consumption is increased in echo_client and echo_server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Separate TLS sockets implementation from net_context layer. Instead of
calling net_context functions directly, create an underlying TCP/UDP
socket, and call socket functions on it instead. This results in a
simpler design, where we don't need to duplicate specific parts of code
from the native socket implementation. Additionally, this allows to use
a different TCP/UDP stack underneath (i. e. when sockets offloading is
used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds helper function to verify protocol, which was done in
two different places in the code. The function returns the underlying
protocol information on success.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the recvfrom() in the test returns EAGAIN, try again in order
to make sure that we have really received the data.
Fixes#27963
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to be possible to debug usermode threads need to be able
issue breakpoint and debug exceptions. To do this it is necessary to
set DPL bits to, at least, the same CPL level.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
GDB on host may ask the guest to read the a pointer contents even if
it is pointing to NULL. Send an error code when this occurs.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Sample example built with gdbstub enabled. Two serials are used, one for
normal output and another one that is used talk with gdb in the host
machine.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
