Add example how to use gnome-terminal when launching a new
terminal for attaching the UART.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add note about the availability of touch panel IRQ linei when a jumper
in the board is soldered. A Device Tree commented entry has also been
added to ease testing it.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The FT5336 driver has been improved and generalized so that multiple
Focaltech touch controllers can be supported using the same single
driver. According to specifications the following list of controller
variants should be supported: FT5x06, FT5606, FT5x16, FT6x06, Ft6x36,
FT5x06i, FT5336, FT3316, FT5436i, FT5336i and FT5x46.
Tested using ER-TFTM028-4 display module (FT6X06).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Running check_compliance on a PR before submitting it can avert
embarrassing mistakes. Ensure the packages needed to do so are
installed along with all the others.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Put message to a full queue or get message from an empty queue with
different timeout: K_NO_WAIT, a period of time, K_FOREVER.
Signed-off-by: Meng xianglin <xianglinx.meng@intel.com>
Move call to reset_pairing to bt_conn_security_changed, since this
should always be done at the same time, and should be done in the same
order for all calls. For auth_complete this was reset after the
callbacks, which is inconsistent with the other events.
Also call it even if not connected anymore, the disconnection complete
event will be delivered after this event. Callback should alway be
called if security was initiated.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
struct device is by definition representing an device driver instance
and as such, driver_ prefix in attributes is rather redundant and can be
removed.
Fixes#27397
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There use to be a config attribute of type device_config, on which
config_info could be found. config_info was thus named that way to
differentiate easily from config attribute in struct device.
Now that there is no such device_config structure, config_info in
structure device now, can be renamed to config.
Semantically, it makes for sense. We have an attribute pointing to the
configuration of the device driver instance. Configuration information
is correct but has a redundant meaning.
Fixes#27397
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds comment clarifying how does DTS chosen node,
'zephyr,shell-uart', impacts default value of option assigning UART
port to the shell.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add for various flash runners (pyocd, nrfjprog, and dfu-util) to do a
full chip erase. This is needed for the sample to pass in sanitycheck
on real hardware.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Currently '--coverage-tool gcovr' results in using lcov. Fix that to use
gcovr, as requested by user.
Fixes: f6462a3a8c ("sanitycheck: get rid of global VERBOSE")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
For platforms using non-native stacks, net_tcp_init() should be
compiled out, similar to how it is done in tcp_internal.h.
Fixes#27463
Signed-off-by: Vincent Wan <vwan@ti.com>
Added support for syncing to periodic advetisements.
The API and usage is heavily inspired by the extended advertisement
and connection APIs.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added the ext adv report interval to bt_le_scan_recv_info which
denotes whether or not there is periodic advertisement data
associated with the advertisement report.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added API to set periodic adv parameters, periodic adv data
and to enable/disable periodic advertisement.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
When FAT FS option is enabled, then the FAT FS sub-menu will appear
next to it, instead of appearing far down the list.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add tests that will make sure that refcounting works as expected.
Also fixed two tests that were using the object values before
the fdtable contained proper values. After reserving a fd by
z_reserve_fd(), we can only call z_finalize_fd() or z_free_fd(),
and only after those calls can fetch obj and vtable values.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use proper refcounting instead of magic value in obj field
when checking whether the fd is still in use. This will make
sure that if fd is shared between two threads, we do not
release it too soon.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because the H1 heading was not set in mikroe_eth_click index.rst
file, the shields listing page was listing H2 headings for this
shield.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This file is setting Kconfig options even when it is not the chosen
SoC. I noticed this because without this patch, CONFIG_SOC_GECKO_EMU=y
when building for an unrelated board with SYS_POWER_MANAGEMENT=y.
Hide any subtrees in this file when the EXX32 family isn't selected.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This patch enables the rtc so that the testcase
tests/drivers/counter/counter_basic_api
can run on this nucleo_l152re board
also when running sanity checks patch set
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The rtc counter is also built for the stm32l1 series
from STMicroelectronics.
The EXTI line 17 is mapped on RTC alarm pin
Signed-off-by: Francois Ramu <francois.ramu@st.com>
It does not auto-initiate the DLE procedure if the default data length
parameters are not equal to the initial parameters.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Some controllers do not follow the recommendation of auto-initiating
a data length update if the host writes default data length parameters.
If the controller follows this recommendation, calling
LE Write Suggested Default Data Length command is sufficient
to ensure that the LL will auto-initiate the DLE procedure. Performing
a second procedure is unecessary.
In Core v5.2, Vol 4, Part E, Section 7.8.35:
The HCI_LE_Write_Suggested_Default_Data_Length command allows the
Host to specify its suggested values for the Controller's maximum
transmission number of payload octets and maximum packet
transmission time for packets containing LL Data PDUs to be used
for new connections. The Controller may use smaller or larger values
for connInitialMaxTxOctets and connInitialMaxTxTime based on local
information.
In short, this command sets connInitialMaxTxOctets
and connInitialMaxTxTime.
In Core v5.2, Vol 6, Part B, Section 4.5.10:
For a new connection: connMaxTxOctets shall be set to
connInitialMaxTxOctets and connMaxRxOctets shall be chosen by the
Controller. If either value is not 27 then the Controller should
initiate the Data Length Update Procedure at the earliest practical
opportunity.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Document the behavior of bt_le_ext_adv_set_data ignoring either
advertising or scan response data when the configuration does
not support this type of data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit updates the release notes with the changes introduced
in #26715.
It also informs readers that existing use of `$(SOC_DIR)` in Kconfig
must be updated, for example to use `rsource` instead of
`source $(SOC_DIR)` in order to adopt to latest changes.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates the description of SOC_ROOT according to the new
multiple SOC_ROOT enhancement.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fix issue with bt_gatt_service_unregister not clearing CCC information.
If the service is unregistered while an unbonded peer is connected and
subscribed then this CCC would be restored again when registering the
service even if the peer is now disconnected.
If the service is unregistered with bonded peers CCCs stored in settings
then this value would never be cleared. If the service is registered
again then the peer would receive a service changed for this service,
but it's CCC value would still be enabled.
Fixes: #26924
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Extract enqueue of GATT CCC when CONFIG_BT_SETTINGS_CCC_STORE_ON_WRITE
is enabled to a helper function gatt_ccc_conn_enqueue so that it can be
reused.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Document need to register services that are always registered as dynamic
services with CCCs loaded from settings.
These services must be registered before calling settings_load.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
