Some Clocks have ifdefs only for clock_control_on but are missing
them for clock_control_off.
Additionally return ahb_clock clock frequency for stm32g0
STM32_CLOCK_BUS_IOP in stm32_clock_control_get_subsys_rate.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds LiteX SoC Builder clock control driver for MMCM
module. It gives ability to change frequency, phase and duty cycle
on up to 7 clock outputs.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Use the clock devicetree node as the source of object name and other
information used when defining the device structure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
An event was not handled by the clock control resulting in assert
and lack of notification about clock readiness.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a Kconfig option (enabled by default) the enables the low-frequency
oscillator (LFXO) functionality on the XL1 and XL2 pins in the nRF53
SoC initialization routine. This cannot be done in the clock control
driver, as it was done so far, because that won't work in a setup where
the application core image does not use the system clock at all.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Stable API change: modify parameters of clock_control_async_on which
previously took a structure which contains list node, callback and user
context. Removing list node and replacing structure with two parameters:
callback and user context. List node is removed because it has no use
in current API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The PLL Q divisor does not exist on stm32g0X0 variants. It should only
be configured for g0X1 variants.
Signed-off-by: Eric Hay <EHay@sierrawireless.com>
Add const modifier for hal instances, clock devices pointer, and module
base address in npcx drivers to prevent driver functions change them
unexpectedly.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
1. clock: move the call for MSI hardware auto calibration enabling
before the control of MSI enable to ensure its execution in all
cases.
2. counter: add call for MSI hardware auto calibration enabling after
the LSE enabling and after possible backup domain reset that may
clear MSIPLLEN.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Adds imx rt support.
Allows n-number of can interfaces based on device-tree.
Adds a "common" irq name.
Added CAN bus pins and dts for 1060 and 1064 EVK.
Signed-off-by: Rick Talbott <rtalbott@fastmail.com>
Algorithm for waiting for clock stabilization was failing in case when
it was waiting for clock availablity and clock was already available
before function was called. That is because nrfx_clock_is_running
was returning false because XTAL was already started but not yet
running.
Added a check for current LF source, if XTAL is picked that indicates
that RC is already running because of two stage startup procedure.
Added documentation of lfclk_spinwait with explanation of two stage
approach.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Pins used for external LF clock source must be configured as
used by peripheral to allow using LFXO on network side.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Enabled going to idle when waiting for low frequency clock.
Added 2 stages of starting LF clock when XTAL is used. First
stage is starting RC and then when it is ready XTAL is started.
It is done to get event/interrupt when RC is ready which means
that LF clock is available (but not stable).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added configuration for approach to starting system clock source.
There are 3 options: no wait, wait untill available, wait until
stable.
Added support for those modes in clock control driver which handles
low frequency source clock.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
VCO input frequency can be checked and set during compile time.
It unfortunately does not work for output frequency because macros in
HAL are defined together with uint32_t type.
This also fixes wrong check in case of HSI used as PLL source.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
Fixed 'line length exceeds 80 columns' warning by shortening the clock
controller device name from NPCX_CLOCK_CONTROL_NAME to
NPCX_CLK_CTRL_NAME.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
This is a follow-up to commit 701e9befe4.
The NRFX_POWER Kconfig option should be enabled together with USB_NRFX,
not with CLOCK_CONTROL_NRF, as the USB driver is the actual user of
the nrfx POWER driver.
This patch adds also missing initialization of the nrfx POWER driver
and refactors a bit the usb_init() function introduced in the commit
mentioned above, so that it does not redefine the DT_DRV_COMPAT macro
and uses for conditional compilation the same Kconfig option that is
the dependency of NRFX_USBREG.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Assuming we stay on default Power Scale 1,
overdrive is required when System Core Clock frequency is higher
than 180MHz.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Replace npcx register base address type, uint32_t, with uintptr_t.
It is easier to know what type of base address and for linear
addresses treated as integral values.
This CL also modified IS_BIT_SET() macro function to fit MISRA code
guidelines.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Renamed nrf clock control driver file since it does no long control
POWER peripheral.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removed all nrf_power/USB related stuff from clock control
driver to USB driver.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update the driver implementation to use nrfx_clock and nrfx_power
drivers. Update also revisions of the hal_nordic and nrf_hw_models
modules, so that it is actually possible to use those drivers.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add clock controller support for Nuvoton NPCX series. This CL includes:
1. Add clock controller device tree declarations.
2. Introduce clock-cells in yaml file clock tree to get module's source
clock and turn off/on the its clock
3. Clock controller driver implementation.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Add HSI divisor support for clock tree configuration.
Removed HSI calibration trimming to comply with
common STM32 implementation and use reset default
configuration instead.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Adds preprocessor clock feasibility check to avoid setting
too high clocks to SYSCLK,AHB,APBx buses.
Also checks if CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC
matches with the desired clock configuration by
the M7 core.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Fixed wrong usage of assertions.
Assertions should check that the value is in range and
not out of range.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Fixes#27212 by setting the AHB/APBx dividers
prior to configuring the PLL as clock source.
Prevents going over the limits of APBx clocks when
choosing the PLL as system clock source for
high frequencies (close to 480MHz)
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
This commit adds basic support for the clock controller used in
lpc11u6x MCUs.
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Add HSE,HSI,CSI,PLL as system clock options.
Also add correct configuration of the PLL.
New sysclk options:
- HSI with: CONFIG_CLOCK_STM32_SYSCLK_SRC_HSI=y
- HSE with: CONFIG_CLOCK_STM32_SYSCLK_SRC_HSE=y
- CSI with: CONFIG_CLOCK_STM32_SYSCLK_SRC_CSI=y
Existing sysclk options:
- PLL with: CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
PLL clock options:
- More PLL source clocks:
Existing:
1. HSE with: CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
New:
2. HSI with: CONFIG_CLOCK_STM32_PLL_SRC_HSI=y
3. CSI with: CONFIG_CLOCK_STM32_PLL_SRC_CSI=y
- PLL vco input range is auto-calculated based on PLL DIVM1
-> Example for sysclock 96MHz generated with PLL from HSI
CONFIG_CLOCK_STM32_PLL_SRC_HSI=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=96000000
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
CONFIG_CLOCK_STM32_PLL_M_DIVISOR=4
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=12
CONFIG_CLOCK_STM32_PLL_P_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=4
CONFIG_CLOCK_STM32_PLL_R_DIVISOR=2
Use LL_SetFlashLatency function from stm32h7xx_ll_utils.h
instead to setup the correct latency.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Updated nrf clock control driver to use onoff service for managing
multiple users.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In case of dualcore, STM32H7, STM32W and STM32MP1,
protect concurrent register write access with HSEM.
Done for following drivers:
clock_control, counter, flash, gpio, interrupt_controller
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
We should not set PLLSRC bits here. It is done by
LL_PLL_ConfigSystemClock_* functions which are called later.
Also, PREDIV1 setting should not be restricted to HSE only.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
CLOCK_STM32_PLL_XTPRE Kconfig symbols was made to differentiate
code between F1 soc variants with XTRE and others.
It appears that specific XTRE code handling is already in place in
LL_PLL_ConfigSystemClock_* functions that are called afterwards.
Since this piece of code is not required anymore, let's remove
the symbol.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
According to RM, when increasing the CPU frequency, the new number of
wait states to the Flash latency bits must be written and verified
before modifying the CPU clock source and/or the CPU clock prescaler,
to prevent NMI to occur; when decreasing the CPU frequency, after.
Tested with STM32L462 SOC and MSI with several frequencies, both
increasing and decreasing. HSE built, not tested.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi@nexxiot.com>
