Due to higher traffic demands when using 6lowpan, we should raise
the default BT RX buffer counts and sizes.
This avoids the following error on some HW:
[net/buf] [WRN] net_buf_alloc_len_debug: bt_buf_get_rx():4985:
Pool 0x20009424 low on buffers.
[net/buf] [WRN] net_buf_alloc_len_debug: bt_buf_get_rx():4985:
Pool 0x20009424 blocked for 0 secs
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
it seems regular expresssion is not supported in "source xxx" after
latest changes in build system.
So explictly list all def config
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add pmod mux init to config the pmode interfaces
to the specific functions
* without pmod mux init, all pmod interfaces will be
GPIO, no interfaces for spi/i2c0/i2c1/uart0
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add gpio, i2c, spi definitions
* optimize and bug fix the dts.fixup
* optimize and bug fix the em_starterkit related definitions
in dts folder
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* em9d is configured to use ccm, and no sram
* choose dccm as virtual sram to generate the correct definitions
of CONFIG_SRAM_XXX which are used in many places, e.g. lib-hooks.c.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The original em7d, em9d and em11d are different configurations of
em_starterkit. They have the same peripherals, e.g. uart, spi, gpio
, ddr. The differences of them are in arc core configurations, interrupt
number assignment.
So em7d, em9d and em11d can be viewed in the same SoC family or SoC
series.
Referring other arch's implementation, this commit merges em7d, em9d
and em11d into the same SoC, named snps_emsk. This will eliminate
unnecessary duplication and make it easier for future maintainment.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Implementation of Get Descriptor Request should not return interface
or endpoint descriptors in a single request without configuration
descriptor, see USB Spec. Revision 2.0, 9.4.3 Get Descriptor
This patch fixes linux kernel usbtest subtest 7 and subtest 11 errors.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The zephyr.exe created when building a native POSIX application can take
some parameters that are documented in the "board" document, so add a
reference to that documentation here.
fixes: #6384
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
- Changed define for SETTINGS_CONFIG_PAGE_SIZE from a hard coded value
to reference build system generated FLASH_ERASE_BLOCK_SIZE. This value
comes from 'erase-block-size' found in the dtsi file of devices.
- Modified nrf52840.dtsi to include definition for 'erase-block-size'
Fixes#7107
Signed-off-by: David Leach <david.leach@nxp.com>
The 'if condition' in usb_handle_control_transfer is diffcult
to understand. So I rewrite another version.
Fixes#7340
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
According to data sheet of dw_spi, ser reg is used to
select spi device/slave.
one bit in ser maps to one spi device/slave, i.e..
cs 0 ---> bit 0
cs 1 ---> bit 1
cs 2 ---> bit 2
the original code has a bug. the config->slave cannot
directly be written into ser. It should be mapped to
the correct bits through 1 << config->slave.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Make sure that we compile sanity checked application with
more config options in order to catch compile issues faster.
In this case DHCPv4 + debugging options are enabled for
sanity checker.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If DHCPv4 was enabled, then there was compile error as the code
was still using wrong variables.
Fixes#7342
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
patch removes Kconfig defines for RAM and ROM size in x86. Instead
these values are derived from dts.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Clear the toolchain capability cache when ccache is cleared so that
the different host-side caching mechanisms have a similair lifetime.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This ensures the every characteristic has a value attribute declared
with the same UUID since the old macro did not declare the value the
application would normally have to declare one itself using a different
UUID which is not allowed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds BT_GATT_ATTRIBUTE which replaces BT_GATT_DESCRIPTOR as the
most basic way to declare an attribute since using descriptor may be
confusing when declaring things like a characteristic value since the
Bluetooth has their procedures completely separated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
New test checks watchdog API if the simpliest test cases work
correctly. Each test contains description at the begining of the
source file.
This implementation replace old SoC-centric implementation.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Commit introduces support for watchdog configuration for Nordic
Semiconductor nRF SoCs in device tree.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
New API enables setting watchdog timeout in the unit of microseconds.
It is possible to configure watchdog timer behavior in CPU sleep state
as well as when it is halted by the debugger.
It supports watchdogs with multiple reload channels.
Jira: ZEP-2564
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Add a check to raise an error if SYSCFG is disabled,
before doing the pin remaping for F0 SoCs on QFN28
and TSSOP20 packages.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Enable System Configuration Controller clock in clock_control
instead of gpio controller when we set a gpio as interrupt.
We use System Configuration Controller to manage external
interrupts and enable PIN pair PA11/12, used in USB device,
mapped instead of PA9/10.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Enable System Configuration Controller clock in clock_control
instead of gpio controller when we set a gpio as interrupt.
We use System Configuration Controller to manage external
interrupts and internal voltage reference for 48 MHz HSI
used in USB device.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
In STM32L0 series, HSI48 requires VREFINT and its buffer
with 48 MHz RC to be enabled. This patch enables
VREFINT reference for HSI48 oscillator.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
USB LL API provides the EP_TYPE_* defines. STM32Cube does not
provide USB LL API for STM32L0 family. Map EP_TYPE_* defines
to PCD_EP_TYPE_* defines.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
As this test uses dummy L2 driver, there is no need for ethernet
specific setup as that is not used for anything.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When creating IPv4 packet, the IPv4 header contained uninitialized
values. This was reported by valgrind.
Conditional jump or move depends on uninitialised value(s)
at 0x8066AB0: calc_chksum (utils.c:386)
by 0x8066C99: calc_chksum_pkt (utils.c:428)
by 0x806710A: net_calc_chksum (utils.c:487)
by 0x8067B8D: net_calc_chksum_icmpv4 (net_private.h:138)
by 0x8067FEC: net_icmpv4_set_chksum (icmpv4.c:90)
by 0x8068E7A: net_icmpv4_send_error (icmpv4.c:338)
by 0x807272F: send_icmp_error (connection.c:773)
by 0x80731A3: net_conn_input (connection.c:992)
by 0x806A34D: net_ipv4_process_pkt (ipv4.c:212)
by 0x805D8B9: process_data (net_core.c:103)
by 0x805D939: processing_data (net_core.c:117)
by 0x805E498: net_rx (net_core.c:300)
Uninitialised value was created by a stack allocation
at 0x804A437: setup_ipv4_tcp (main.c:297)
Conditional jump or move depends on uninitialised value(s)
at 0x8067117: net_calc_chksum (utils.c:489)
by 0x8067B8D: net_calc_chksum_icmpv4 (net_private.h:138)
by 0x8067FEC: net_icmpv4_set_chksum (icmpv4.c:90)
by 0x8068E7A: net_icmpv4_send_error (icmpv4.c:338)
by 0x807272F: send_icmp_error (connection.c:773)
by 0x80731A3: net_conn_input (connection.c:992)
by 0x806A34D: net_ipv4_process_pkt (ipv4.c:212)
by 0x805D8B9: process_data (net_core.c:103)
by 0x805D939: processing_data (net_core.c:117)
by 0x805E498: net_rx (net_core.c:300)
by 0x805E51D: process_rx_packet (net_core.c:312)
by 0x8085E87: work_q_main (work_q.c:39)
Uninitialised value was created by a stack allocation
at 0x804A437: setup_ipv4_tcp (main.c:297)
Fixes#7447
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The options array was not initialized to 0 and the size of the
array was not set properly. This caused following error in valgrind
Conditional jump or move depends on uninitialised value(s)
at 0x8056777: coap_find_options (coap.c:1096)
by 0x804AEFF: test_parse_simple_pdu (main.c:455)
by 0x80500E6: zephyr_app_main (main.c:1585)
by 0x807E231: bg_thread_main (init.c:254)
by 0x80842D7: _thread_entry (thread.c:201)
by 0x8059618: posix_thread_starter (posix_core.c:301)
by 0x40752C8: start_thread (in /usr/lib/libpthread-2.25.so)
by 0x4182055: clone (in /usr/lib/libc-2.25.so)
Fixes#7447
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will lead invalid IPv6 address to be generated. This was seen
in valgrind.
Conditional jump or move depends on uninitialised value(s)
at 0x40371A4: bcmp (vg_replace_strmem.c:1100)
by 0x8058833: net_ipv6_addr_cmp (net_ip.h:542)
by 0x805B999: ipv6_addr_find (net_if.c:768)
by 0x805BC8C: net_if_ipv6_addr_add (net_if.c:846)
by 0x804A7D7: _iface_ip6_add (mgmt.c:271)
by 0x804A5DC: test_core_event (mgmt.c:251)
by 0x804AD1D: test_mgmt (mgmt.c:320)
by 0x807EA81: run_test_functions (ztest.c:56)
by 0x807EC3C: test_cb (ztest.c:196)
by 0x8085AFD: _thread_entry (thread.c:201)
by 0x8051B43: posix_thread_starter (posix_core.c:301)
by 0x40752C8: start_thread (in /usr/lib/libpthread-2.25.so)
Fixes#7447
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This removes some tricky math to calculate lengths and offsets,
ensuring that, when appending the WebSocket UUID to the handshake
key, the key_accept buffer won't overflow.
Coverity-ID: 183057
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Rewrite prepare_reply() to reduce unnecessary string copies and calls
to net_pkt_append_all(). Also reduces some of the tricky string length
calculations.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This is handier in some ways compared to the symbol reference pages. The
search feature is more flexible, and you get to see which dependencies
are currently unsatisfied.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
STM32Cube HAL core initialization functions HAL_GetTick()
and HAL_Delay() are implemented in all STM32 series. This
patch moves these functions in file stm32cube_hal.c under
"common" folder to reduce code duplication.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
The rx_prio_queue k_fifo object has not been used for anything for a
really long time. The use for it was originally removed by the following
commit:
commit ad475d863a
Author: Szymon Janc <ext.szymon.janc@tieto.com>
Date: Fri Apr 22 11:36:04 2016 +0200
Bluetooth: Remove RX priority fiber
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch fixes a coverity issue with the post increment of ni inside
an zassert call. There might be side effects of non-debug builds that
would cause the code to not do the right thing.
Coverity-ID: 185391
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes an overrun detected via Coverity. The
lsm6dsl_odr_to_freq_val function takes an index as argument. If the
index is out of bounds, the expected behavior was to return the last
element of an array. The actual behavior was to overrun the array.
Fixes: #7482
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes a coverity issue with checking the outcome of a call
to net_if_config_ipv6_get().
Coverity-ID: 183478
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The document talks of settings_handler fields such
as ch_name and ch_set, whereas the actual names
are name, h_set, etc.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch fixes a couple of coverity issues pertaining to
uninitialized members of a sigevent structure.
Coverity-ID: 183070
Coverity-ID: 185276
Signed-off-by: Andy Gross <andy.gross@linaro.org>
