This renames MIN_DELAY to HPET_CMP_MIN_DELAY, and also allows it
to be overridden. The default delay is for HPET with relative
high frequency, and may not suitable for all HPET
implementations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extracts the hard-coded value into a macro which can be
overridden. This is in preparation for SoCs where the period
is not in femptoseconds.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Opened directory descriptor is leaked when returning 1. Fix that by
utilizing goto in function return path.
Fixes: 6b18e6992d ("subsys/loggin/log_backend_fs: added recovery after
file lost")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This limits the search for Extended BIOS Data Area (EBDA) to
0x80000 to 0x100000 as this is usually the area for it.
If 0000:040e has an address not pointing to this area, it is
probably an invalid address, and should not be de-referenced
to avoid segfault.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Accumulator registers (ACCL, ACCH) are used on HS CPUs not only
in case of FPU usage but also in case of MPY usage. We enable MPY
for all ARCv2 HS in commit
18a24c3f6 ARC: gcc-m-cpu: use -mcpu=archs as a default for ARCv2 HS
but we didn't enable accumulator registers management.
Let's enable accumulator registers save/restore on all ARCv2 HS CPUs
by default.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
rv32m1_vega don't boot due to device init ordering and changes with the
device model. The soc code is looking for a device pointer for the
intmux. Change to using DEVICE_DT_GET here as that will ensure we get
a valid pointer and by the time we need to utilize the pointer the
intmux driver will have been initialized and thus the device pointer
will be ready.
Also set BUILD_OUTPUT_HEX since we utilize openocd to flash and west
flash is looking for a hex file for openocd targets.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the host toolchain is used, `-nostdlib` option is not specified
and therefore all default libraries, including the libgcc and its
components, are automatically linked -- so it is not necessary to
manually link them here.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The host toolchain makes use of the host toolchain libraries (i.e.
`-nostdlib` is not specified), so it is not necessary to detect the
toolchain libgcc path and specify one manually.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the build system to always detect the libgcc path
for the host platforms regardless of the target architecture.
The native_posix_64 target previously used the x32 ABI (`-mx32`) and
the multilib for this ABI was not commonly available in the x86-64 host
toolchains.
That is no longer the case because native_posix_64 had been updated to
use the x86-64 ABI (`-m64`).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the `NOT no_libgcc` condition for the automatic
libgcc path detection.
The `no_libgcc` variable was previously set in this file to exclude
libgcc detection for the x86-64 targets because the x86-64 arch used
x32 ABI (`-mx32`) and the multilib for this ABI was not commonly
available. This is no longer the case (x86-64 targets now use `-m64`)
and libgcc must always be available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Reserve a minimum node rx of 2 that can happen when local
central initiated PHY Update reserves 2 node rx, one for PHY
Update complete and another for Data Length Update complete
notification. Otherwise, a peripheral only needs 1
additional node rx to generate Data Length Update complete
when PHY Update completes.
Relates to #36381.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace the post decrement in loop's conditional into
explicit decrement inside the loop so as to avoid
decrementing the maximum count without enqueueing free rx
buffers into the free rx buffer MFIFO.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
commit 5e9c583c24 ("arch/x86_64: Terrible, awful hackery to
bootstrap entry") introduced a terrible trick which begins execution
at the bottom of .locore with a jump, which then gets replaced with
NOP instructions for the benefit of 16 bit real mode startup of the
other CPUs later on.
But I forgot that EFI enters in 64 bit code natively, and so never
hits that path. And moving it to the 64 bit setup code doesn't work,
because at that point when we are NOT loaded from EFI, we already have
the Zephyr page tables in place that disallow writes to .locore.
So do it in the EFI loader, which while sort of a weird place, has the
benefit of being in C instead of assembly.
Really all this code needs to go away. A proper x86 entry
architecture would enter somewhere in the main blob, and .locore
should be a tiny stub we copy in at runtime.
Fixes#36107
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The definition of the STM32_LSE_CLOCK is given by the
drivers/clock_control/stm32_clock_control.h
to the hci/ipm_stm32wb driver
Signed-off-by: Francois Ramu <francois.ramu@st.com>
- Fixed some incorrect streamport references that pointed to the
base streamport files instead of those dedicated for Zephyr.
- Updated the source file compilation to match the updated
TraceRecorder module.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Recent versions of mypy have learned that the yaml module has type
stubs and the tool is now erroring out when it discovers we import
yaml since the stubs are not involved.
This is breaking CI on unrelated patches; fix it following the
instructions here:
https://mypy.readthedocs.io/en/stable/running_mypy.html#missing-imports
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Code snippet to demonstrate use of 'zephyr,user' binding
for gpio pin was missing a #define to easily get the code
compiling.
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit adds a closing parenthesis for soc model of stm32g050.
Resolves issue #36014
Signed-off-by: Bhavesh Bhojwani <bhaavesh.bhojwaani@gmail.com>
The flash write function casts a void * to flash_prg_t, which can be 2,
4 or 8 bytes long depending on the SoC. This can trigger a hard fault
exception if data is not aligned, such as when passing a constant string
from settings_save_one().
Copying the chunk of data to a temporary variable on the stack to avoid
the problem.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
In order to increase test coverage, this commit updates the libcxx test
to run with both full and nano variants of the newlib.
Note that C++ exception handling feature is only enabled for the newlib
full variant because the nano variant does not support C++ exception
handling.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use the full version of newlib (i.e. not nano) for libcxx testing since
some features (e.g. C++ exception handling) require the full version of
newlib.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit makes C++ exception handling feature depend on the full
version of newlib (i.e. `CONFIG_NEWLIB_LIBC_NANO=n`).
The `nano.specs`, which selects the nano variant of newlib, libstdc++,
and libsupc++, does not support C++ exception handling because its
lib*c++ is compiled with `-fno-exceptions`.
For more details, refer to the issue #35972.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The `.eh_frame_hdr` and `.eh_frame` ROM sections, which contain read-
only C++ exception handling information, are currently specified in
`cplusplus-ram.ld`, and this can cause the linker output location
counter to take a ROM region address while in the RAM region.
This commit relocates these sections to `cplusplus-rom.ld` in order to
prevent the linker output location counter from getting corrupted.
For more details, refer to the issue #35972.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Update release notes for 2.6, and the vulnerabilities page to mention
CVE-2021-3581. This CVE is under embargo until Sept 4, 2021.
Signed-off-by: David Brown <david.brown@linaro.org>
Mention the example application as a major enhancement and provide a
link to its repository.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update to the Zephyr build configuration CMake package documentation
with description on how a Zephyr build configuration CMake package can
be located outside a Zephyr workspace.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #35890
The current implementation of Zephyr build configuration CMake package
only allows the build configuration package to be placed inside a
Zephyr workspace.
This commit extends the usability by allowing users to locate the
Zephyr build configuration CMake package outside the Zephyr workspace
and then refer to the package using
`-DZephyrBuildConfiguration_ROOT=<path>`
`set(ZephyrBuildConfiguration_ROOT <path>)`
This allows users greater flexibility in their workspace layouts.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
* Added a bullet about new storage subsystem feature
* Moved disk subsystem changes into disk section
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The tabulator handler creates a single structure if it is handling
dynamic commands. If the currently processed dynamic command has a
dynamic subcommand they both share the same structure.
As a result tabulation operation may result in undefined behaviour.
As a solution, a new structure was introduced to keep subcommand
information.
Fixes#35926.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Fix incorrect and redundant use of ticker user id ULL_LOW
instead of ULL_HIGH when setting up a connection using a
mayfly to disable LLL context. Also, the LLL context pointer
is invalid, where node rx is passed instead of LLL context.
Use the ULL disabled callback when done event has not yet
been processed, or a direct connection setup in ULL_HIGH
context when ULL is already disabled (reference count is
zero) is sufficient.
Regression introduced in commit 30f260dfaa ("Bluetooth:
controller: Fix adv/scan context access post release").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The caller saved registers were restored both as caller saved and
callee saved registers, i.e. register 0-15 were restored into
both register 0-15 and 15-31.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Shell log backend depends on logging being enabled. Lack of this
dependency leads to compilation failure when logging is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
For some reason a few drivers were not converted to the new device PM
callback signature. The reason may be because the device PM part is
compiled only when CONFIG_PM_DEVICE=y, a condition not enabled in CI by
default.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The data-sjw value was incorrectly written to the NBTP register when it
should be written to the DBTP register.
This fixes a regression introduced by
5e0ca9b41e.
Signed-off-by: Christoph Steiger <c.steiger@lemonage.de>
Updates the frdm_k64f board documentation to clarify that the J-Link
OpenSDA firmware version depends on the DAPLink bootloader version.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This board got forgotten when we migrated the older APIC_TIMER users.
Now the platform is SMP by default and the older driver refuses to
build.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
ACRN build and configuration is non-trivially complicated, and so far
integration documentation has been mostly missing, and users have had
to get by via copying from existing integration efforts with minor
changes, leading to repeated mistakes and persistent confusion. This
is an attempt to document the process from first principles, with an
eye toward informing integrators (not me!) who might come by later to
better automate things. Some of the content is going to look remedial
to someone already familiar with e.g. ACRN configuration or EFI boot.
This simply replaces the pre-existing docs, which were for earlier
versions of ACRN where Zephyr was launched from the service OS instead
of the now-standard pre-launch VM mode.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
SMP is working now, make a 2-cpu configuration default for this
device.
Note that this requires changes to the default ACRN build
configuration! In hybrid.xml, you need to specify multiple physical
CPUs for the VM to uses, e.g.:
<vm id="0">
...
<cpu_affinity>
<pcpu_id>0</pcpu_id>
<pcpu_id>1</pcpu_id>
</cpu_affinity>
</vm>
Failing to build with this change will result in the system hanging at
boot trying to start up a CPU that won't run.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
