Adds the socket option TLS_ALPN_LIST for SOL_TLS sockets
Passes the configured alpn list to the mbedtls config
on mbedtls init
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
In fixing up the altera vendor prefix, we forgot to rename the binding
files to match the compatible.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we are sending data directly, we already have TCP lock so
there is no need to do any locking. But when data is re-sent,
the work queue handler is doing the sending so we need to lock
the TCP connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When receiving data that needs to be passed the data to application,
queue it for short time so that we do not have TCP connection lock
held. This way if the application wants to send data, there is no
possibility that the connection lock would prevent sending data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Release the context lock before passing data to the application
socket as that might cause deadlock if the application is run
before the RX thread and it starts to send data and if the RX
thread is never able to run (because of priorities etc).
Fixes#29347
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Listen func goes through a chain of calls to call winc1500_accept.
This is done to install the accept callback and should not block.
This fixes#28953 where winc1500 driver blocks on listen.
Signed-off-by: Nicolai Glud <nicolai.glud@prevas.dk>
The synchronous arch hook wasn't being invoked when
k_mem_domain_init() was called with a partition list.
This could result with regions not being programmed in
the page tables as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The current policy of always excluding stacks that aren't
owned by the current thread only works well on MPU systems,
where it is very fast to have a reserved MPU region corresponding
to the stack buffer of the current thread.
This unfortunately is not efficient on MMU-based systems, it
would require either a different set of page tables per thread
or an expensive page table update on context switch.
This PR relaxes the documented policy to leave it up to the
implementation whether threads that all belong to the same
memory domain can see each other's stacks.
There's lots of precedent for this, for example on Linux threads
in the same process can all access each other's stacks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are a few cases in which "altera" was used instead of "altr" as
the vendor prefix. Update DTS and bindings in those cases to use "altr"
Fixes#29373
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Extend the test_single_read test case to catch RX_RDY events that are
not expected to appear.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There is no need to involve a work queue to control timeouts in
the uart_nrfx_uart driver. Kernel timers are sufficient for those
tasks, and the uart_nrfx_uarte driver may serve as a proof of this.
Replace then those uses of work queue with timers, for consistency
and simplicity, also to avoid potential issues with cancellation of
the delayed work queue items.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The SPI NOR device on this board supports fastread, 2READ, DREAD,
4READ, and QREAD for read opcodes, but only PP and QPP for write
opcodes. Provide a clue to people trying to use 2READ with 2PP: it
won't work.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Rather than doing a doc build on every PR, limit it to PRs that either
touch a file in doc/, *.rst and what's listed as DOXY_SOURCES in
doc/CMakeLists.txt.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When waiting for data from CP, the data timeout check must happen before
no-data check. If not, a partial packet may endlessly hold PD in
"wait-for-data" state, while the PD keeps reporting status as online
till another packet is received.
Fix this my moving no-data check below the timeout check.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Split CP and PD samples into dedicated directories as the difference
between the two are expected to grow with time. Also, do some
refactoring.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
All OSDP packets must start with a mark byte (0xFF) followed by a Start
of Message byte (0x53). Skip all bytes received until such a sequence is
seen to to avoid waking up the refresh thread needlessly.
Also, refactor osdp_uart_isr() to reduce number of local variables.
Fixes: #28168 Coverity-ID: 214218
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Minimize number of exported methods by unifying all osdp_cp_send_cmd_*()
as osdp_cp_send_command().
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Exported header oftenly used when creating a logging
backend that inpects the log 'stream'.
Enables use in external Zephyr modules implementing the
logging backend interface.
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
These defines are leftover of old platform settings implementation
and are not used any more.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Adds a test case listing in sample.yaml of the mesh_provisioner sample,
building on qemu and the Nordic nRF51 DK to ensure that the provisioner
role is built in PRs.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Power management sample for that board has very
confusing name that should be changed to something
more understandable.
Current name sample.board.sample.board.mec15xxevb_assy6853
I suggest to have new name
sample.board.power_management.mec15xxevb_assy6853
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
LORAWAN_ACT_* should be assigned instead of LORAWAN_CLASS_*. Previously
used LORAWAN_CLASS_A has the same integer value as LORAWAN_ACT_OTAA, but
update code with the latter to use the proper type.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The TACH_XEC_DATA macro was not using its parameter
to retrieve the data structure.
It was working by chance so far.
Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
Deprecate the Musca-A board and SoC support to be removed in 2.6.0.
There are a number of issues with the Musca-A and there exists both the
Musca-B and Musca-S1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Avoids parsing the whole "before to now" commits after rebase.
Now, we just parse all commits since first commit of the branch
compared to master, each timer either at first push, forced push,
forced push after rebase.
Fixes#28509
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add chosen nodes for secure and non-secure RAM partitions
and update the common DTS to have a reserved-memory
node with all reserved RAM partitions
Signed-off-by: Alex Tsamakos <alex@actinius.com>
