Now we create plaform reports for each enabled platform, this is time
consuming, especially if you are not using those reports for anything.
Make this an option and enable only if the generated reports are going
to be used.
Individual reports can also be generated from the JSON file if needed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Runner implementations are only allowed to unconditionally import
modules in the python standard library. They are not allowed to import
anything that comes from pip or other third party sources unless they
catch the ImportError and gracefully do nothing.
Fix the imports in the mdb runner accordingly, sorting the imports
into sections to make it clearer what's stdlib, what's runners, and
what's third party while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Put everything inside an if, we should not see anything related to
uart_mux in generated .config if it is not enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put everything inside an if, we should not see anything related to
hawkbit in generated .config if it is not enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put everything inside an if, we should not see anything related to
updatehub in generated .config if it is not enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a simpel wrapper script called 'sanitycheck' to be removed after
Zephyr 2.5.
This script has a warning and a 5 sec delay to get the attention of the
caller.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the "module" classes used by sanitycheck into a new location under
pylib, where we can have other python libraries reside instead of having
them all over the place.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the CSV files with release related data out of the python directory
into scripts/releases, which is more appropriate.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move yaml schemas into one single location. We have quite a few schema
used across the tree, one common place will make them easier to find and
reference.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix compiler warnings associated with 'level' and 'entry' variables
'may be used uninitialized in this function'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The GIC interrupt controller driver is using a custom init function
called directly from the prep_c function. For consistency move that to
use SYS_INIT.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Updated lvgl sample.yaml file to build the lvgl sample during
sanitycheck for the native_posix board with the dummy display driver and
Kscan disabled.
Using the dummy display driver and disabling Kscan removes the
dependency towards the availability of libdsdl2 on the host system.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Convert watchdog drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Bluetooth Mesh require minimum limit time to enter iv update
state or return to iv nornal state.
For Zephyr bluetooth mesh implementation, use`ivu_duration`
type `uint8_t` to represent current time, but if the time is
more than 255 hours, there will be problems due to the
overflow of 8-bit unassigned variables.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Modify test .yaml file, to allow the .gap_filling test
variant to execute only on cortex-m33 platforms with
sufficient number of MPU regions. Copy pasting the
configuration from mem_protect/userspace test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove the DTS overlay files for nRF5340 DK and PDK,
since the SRAM partition changes are matching the
default SRAM partitioning in these boards.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update the documentation of nRF5340 to stress that
TF-M is the default solution for building the Secure
image.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a note in the 2.5 release notes, about TF-M being now
the default Secure Processing Element (SPE) for nRF5340 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Extend the nRF5340 board's CMakeLists.txt file to
support building TF-M without BL2 for nRF5340. The
result of the build is a single merged-hex containing
TF-M (SPE) and Zephyr (NSPE).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Re-adjust the available RAM advertized by the nRF5340 DK
and PDK .yml files (Application core, Non-Secure version
of the board).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Modify the default partitioning of the Application core
SRAM, for Secure and Non-Secure domain, to accommodate
the default build configuration of TF-M. The RAM TF-M
uses should fit into the sram0_secure. The partitioning
should match what TF-M is allocating to secure and non-
secure domain.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building with TF-M support (for non-secure Zephyr
applications) default to build TF-M without BL2 support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable building with TF-M by default on nRF5340 DK Application
core (cpuapp) when building for the non-secure version of the
board.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Skip the test_disable_mmu_mpu test case for
Cortex-M non-secure builds, since the test
may enter a BusFault which is not banked
between security states and the system
may hang.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Skip the scenario of accesing a faulty address
in test_string_nlen for Non-Secure Zephyr builds,
because accessing faulty addresses in this case
triggers SecureFault that may hang the system
completely.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The cc13xx_cc26xx driver uses "inst" so we need to use
DEVICE_DT_INST_DEFINE instead of DEVICE_DT_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
