Added support for hardware flow control in EFM32 UART driver.
Signed-off-by: Timo Dammes <timo.dammes@lemonbeat.com>
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Use the new SFDP infrastructure to read the supported erase type sizes
and commands from the Basic Flash Parameters block. This removes the
need for explicit reference to most block sizes from this driver.
We're also seeing devices where the page size is not 256 bytes.
Accommodate them.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
With SFDP support we no longer need to get the JEDEC ID or device size
from devicetree. Make them optional in drivers that have been
converted to support SFDP. When runtime SFDP is not enabled the
presence of the required properties will be verified at build-time.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Allow the devicetree binding for a jedec,spi-nor device to provide the
device capabilities by encoding the Serial Flash Discoverable
Parameters Basic Flash Parameters table in the devicetree node. This
supports applications where a specific flash device will be used and
runtime discovery of device capabilities is not desired.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add IUART driver based on MCUX SDK. This driver is used to provide
serial console support on i.MX8M Mini SoC.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Add devicetree bindings for the Xilinx AXI GPIO v2 IP. This GPIO
controller has an optional "GPIO2" port, which is not always present.
The Xilinx specific devicetree property names and their meaning match a
subset of what can automatically be generated based on the FPGA logic
design using https://github.com/Xilinx/device-tree-xlnx. These
properties are also used by the Linux kernel.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Change the documentation for the arm,dtcm (Data Tightly Coupled Memory)
to reflect that it is not specific to the Cortex-M7 (but also present
on e.g. the Cortex-M1).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Skeleton board support for the npcx7m6fb evaluation board from Nuvoton
Technology. This CL also includes:
1. Add ecst python scripts to append the header used by NPCX ROM.
2. Add openocd configuration scripts for "west flash".
3. Add monitor FW binary file for programing/verifying embedded flash
in NPCX series.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Add pin controller support for Nuvoton NPCX series
Add pin-mux controller support for Nuvoton NPCX series.
This CL includes:
1. Add pin controller device tree declarations and introduce alt-cells
to select pads' functionality.
2. Add npcx7-alts-map.dtsi since the mapping between IO and controller
is irregular and vary in each chip series.
3. Add nuvoton,npcx-pinctrl-def.yaml and its declarations to change all
pads' functionality to GPIO by default.
4. Pinmux controller driver implementation.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Add clock controller support for Nuvoton NPCX series. This CL includes:
1. Add clock controller device tree declarations.
2. Introduce clock-cells in yaml file clock tree to get module's source
clock and turn off/on the its clock
3. Clock controller driver implementation.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Initial support for Nuvoton NPCX7M6FB SoC of NPCX series which is a chip
family of embedded controllers (EC) and targeted for a wide range of
portable applications. We implemented the SoC skeleton in
soc/arm/nuvoton_npcx since there're many chip families in Nuvoton and
aim to different markets such as PC, General MCU, and Audio. The
architectures and hardware modules are different between them. Hence, we
suggest using the company name plus with chip series for better
understanding.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
The FT5336 driver has been improved and generalized so that multiple
Focaltech touch controllers can be supported using the same single
driver. According to specifications the following list of controller
variants should be supported: FT5x06, FT5606, FT5x16, FT6x06, Ft6x36,
FT5x06i, FT5336, FT3316, FT5436i, FT5336i and FT5x46.
Tested using ER-TFTM028-4 display module (FT6X06).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The EFR32MG21 uses a different kind of clock for watchdogs.
It requires an additional peripheral-id parameter in the dts to get the
proper clock as it is based on the watchdog's ID i.e., cmuClock_WDOG#.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
The peripheral is the same on the SAMD20 and SAMD21 except for
different clock and interrupt settings. There is no DAC on the SAMR21.
Leave disabled by default as the DAC is fairly power hungry.
Signed-off-by: Michael Hope <mlhx@google.com>
This commit enables support for parsing 'fixed-link' node when it
is added to node described in 'ethernet,fixed-link.yaml'.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This patch adds description for 'fixed-link' node in ethernet DTS
node. It supports setting speed and duplex.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This commit adds the device tree nodes and bindings for the I2C
controllers of the LPC11U6X MCUs
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
This commit adds basic support for the clock controller used in
lpc11u6x MCUs.
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This commit adds a bindings for the clock controller used in lpc11u6x
MCUs. It also adds a clock-controller node for the lpc11u6x soc series.
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
This patch adds the DT nodes and binding for the pinmux registers,
aka IOCON (I/O control), found on the LPC11U6x MCUs.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Now that the patches have landed, enable more of the peripherals on
the board.
In particular:
* Enable PWM on the LED
* Enable the SPI, USB, and DMA
* Enable the bootloader support
* Add to the PWM and SPI tests
* Call these out in supported.yaml
Signed-off-by: Michael Hope <mlhx@google.com>
Remove the device_type = "memory" property from the PSRAM node. We make
the slightly arbitrary distinction of using 'mmio-sram' compatible for
memories that don't need some kinda of dram style configuration or may
be on die.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For true mmio-sram, arc,iccm, arc,dccm nodes we should not be setting
device_type = "memory". This should be used for true DRAM regions of
memory and not on SoC SRAMs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Rename DT_SRAM_SIZE to DT_DRAM_SIZE since that is more correct
* Remove mmio-sram compatible since that is not correct for DRAM.
* Rename node label from sram0 to dram0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
