...to generate_node_defines().
More explicit. "extract node include info" can be read in many ways:
- Extract a node's "include info"
- Extract node and include info
- etc.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
That way it consistently generates all #define's.
Add some related clarifying comments to main() too.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It's special-cased for merging bindings and not a general dictionary
merging function.
Also simplify the documentation a bit.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Bindings class was only used to implement '!include foo.yaml'
(easier to see after some things were moved out of it). Use plain
functions instead, which might be a bit more transparent and gives
simpler code.
Also remove the recursive '!include' detection for now, which is broken
in that the same .yaml being included twice will always trigger it, even
for non-circular cases.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
As written, this function could take e.g. '!include bar', find 'foo-bar'
(due to the endswith()), and include it. This is undocumented and
doesn't seem to be used, so I'm guessing that it isn't intentional.
Removing that bug/feature also makes the code much simpler.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
load_bindings() is trivial, and it allows some stuff to simplified, like
the check for no bindings being found, and the assignments to the
extract.globals.{bindings,bus_bindings,bindings_compat}.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is (probably) a temporary change just to be able to move some stuff
out of the Bindings class.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Only write out to the .conf file if the define starts with "DT_". The
the conf file should only be used by sanitycheck, west, and
kconfigfunctions at this time. In the future we should remove it, so
lets limit what's it exposing at this time.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
DT_FLASH_AREA_<X>_DEV should be the label of the flash controller. For
flashes that are "jedec,spi-nor" the flash itself is considered the
controller. For "soc-nv-flash" the parent of the flash is assumed to be
the controller.
Rework the logic in how we determined DT_FLASH_AREA_<X>_DEV to handle
both cases.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removes some logic from merge_included_bindings() and makes it easier to
follow.
Also remove an outdated comment ('id' no longer exists) and some
comments that might not be helpful.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The yaml_list dictionary is three regular variables in disguise, as keys
are never added. Use regular variables instead, which is less confusing.
Hopefully the naming makes sense.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The consistency checks at the beginning of the function were not done
for "leaf" .yaml files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
...to merge_included_bindings().
This gives a better hint to what it does (merges properties from
!include'd files).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove the '!include {foo: bar}' support from Bindings._include(). Only
'!include foo.yaml' and '!include [foo.yaml, bar.yaml]' are documented,
and yaml_traverse_inherited() doesn't implement the dict case either.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Mark any define that doesn't start with DT_, LED, SW, or have PWM_LED in
the name as deprecated via __DEPRECATED_MACRO.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some more work will be done here later (yaml_list could be replaced by a
few plain variables, for example), but this is a start:
- Extract the compat string from the 'compatible:' line directly in the
regex, instead of separately
- Flatten the code, turning
if a:
...
if b:
...
if c:
...
into
if not a:
continue
...
if not b:
continue
...
if not c:
continue
...
- Add some comments
- Use clearer naming
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previously, all_compats() returned a dictionary mapping nodes to their
'compatible' values. This dictionary was then (only) used to generate a
set() of all 'compatible' strings.
Save a step and get rid of some code by having all_compats() return a
set() with all 'compatible' strings directly.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- Rename to all_compats(). The "compats" part is consistent with
elsewhere.
- Don't require an empty dictionary to be passed in. Build the
result within the function instead.
- Use more specific names (k, v -> child_name, child_node)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It creates the global 'phandles' dictionary. get_*() makes it sound like
it returns a value.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It creates the global 'reduced' dictionary. get_*() makes it sound like
it returns a value.
Fix a comment that might make people think the global dictionaries are
Python lists too.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Check if the node is missing from 'defs' first, and insert it if not.
That way, later code can assume it exists.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Its possible that a reg property is address only. If that's the case we
should produce any alias information for the size. We should check
nr_size_cells to decide to handle the alias case or not.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have an alias pointing to another alias we would get None in the
resulting conf file. However that alias might exist, so try looking it
up again in the aliases db.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We generate the following FLASH prefixed defines:
FLASH_AREA_MCUBOOT_LABEL
FLASH_AREA_MCUBOOT_OFFSET
FLASH_AREA_MCUBOOT_OFFSET_0
FLASH_AREA_MCUBOOT_READ_ONLY
FLASH_AREA_MCUBOOT_SIZE
FLASH_AREA_MCUBOOT_SIZE_0
Now we generate DT_ prefixed versions:
DT_FLASH_AREA_MCUBOOT_LABEL
DT_FLASH_AREA_MCUBOOT_OFFSET
DT_FLASH_AREA_MCUBOOT_OFFSET_0
DT_FLASH_AREA_MCUBOOT_READ_ONLY
DT_FLASH_AREA_MCUBOOT_SIZE
DT_FLASH_AREA_MCUBOOT_SIZE_0
And will deprecate the non DT_ prefixed versions in the future. We keep
them around as aliases for the time being.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We generate the following FLASH prefixed defines:
FLASH_LABEL
FLASH_ERASE_BLOCK_SIZE
FLASH_WRITE_BLOCK_SIZE
Now we generate DT_ prefixed versions:
DT_FLASH_LABEL
DT_FLASH_ERASE_BLOCK_SIZE
DT_FLASH_WRITE_BLOCK_SIZE
And will deprecate the non DT_ prefixed versions in the future. We keep
them around as aliases for the time being.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We've removed all references to base_label in dts bindings and are
removing the functionality. We should depend on DT_ prefixed defines
going forward.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace generating CONFIG_ symbols with DT_ symbols for chosen
properties like 'zephyr,console' or 'zephyr,bt-mon-uart'. We now use a
kconfigfunctions (dt_str_val) to extract the info from dts into Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since we know do DTS before Kconfig we should try and remove dts from
creating Kconfig namespaced symbols and leave that to Kconfig. So
rename CONFIG_CCM_<FOO> to DT_CCM_<FOO>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As in "#define string". More explicit.
Rename the parameters to name/value instead of k/v too.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
That the 'aliases' key isn't a regular property makes things a bit
confusing. Write the aliases separately, which should be a bit clearer.
That also makes it clear that the order doesn't matter.
The 'aliases' key always exists in defs[node], so use [] instead of
.get(). Also write "'aliases'" instead of "prop" when the value is
known.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Probably easier to understand.
Also rename 'fd' to 'f'. "File descriptor" might make it sound like an
integer.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
That the 'aliases' key isn't a regular property makes things a bit
confusing. Write the aliases separately, which should be a bit clearer.
That also makes it clear that the order doesn't matter.
Also write "'aliases'" instead of "prop" when the value is known.
The .get() seems to be needed to work around a bug, and sometimes you
get DT_...=None in the output. Might look into that later.
extract_string_prop() could generate 'defs' entries without 'aliases'
keys. Make it add an empty 'aliases' dict instead, to remove existence
checks elsewhere.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Returns the empty string for '/foo' and '/', but the old version did
that too, so maybe it's intended.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Inline load_and_parse_dts() and generate_{keyvalue,include}_file().
Also specify UTF-8 for writing files, and fix some mis-indentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Flags take a single argument by default, and removing nargs=1 avoids
getting it as a single-element list.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Get rid of the parent_label variable.
Also avoid using "label" in two different senses (DT label and name of
define macro) within the same comment.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This Patch add functionality for automatic generation of the flash map
using DTS description. Automatic generation allows to replace
C-hardcoded flash_map.
We generate a set of defines based on the index of a partiion:
#define DT_FLASH_AREA_<IDX>_OFFSET 0
#define DT_FLASH_AREA_<IDX>_SIZE 131072
#define DT_FLASH_AREA_<IDX>_DEV "FLASH_CTRL"
#define DT_FLASH_AREA_<IDX>_LABEL MCUBOOT
Additionally we also define:
#define DT_FLASH_AREA_NUM 4
and:
#define DT_FLASH_AREA_<PARTNAME>_ID 0
Signed-off-by: Findlay Feng <i@fengch.me>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Less spammy and as easy to understand ("label" seems a bit confusing
though, but it's consistent with other code).
Also simplify some surrounding code, and clean up the implementation of
str_to_label() a bit.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Pass the dictionary of definitions directly. Shorter and clearer.
Also get rid of some other temporary variables, a redundant str() call,
and some mysterious commented-out code in _extract_flash().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- Maybe the code is trying to turn integers into single-element list,
but it won't work (needs to be [value] rather than list(value)).
Don't think you could ever end up with an integer either.
- extract_controller() assumes that prop_values is a list, so
reduced[...].get(prop) should be reduced[...][prop]. get() means it's
okay for the key to be missing, which makes the code confusing.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- The 'props' key is known to exist (and 'if enabled == ...:' would
crash if it ever was missing)
- 'd' is always a dictionary
- There's no need to test if d['children'] is non-empty before looping
through it
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- The 'props' key is known to exist (and 'if enabled == ...:' would
crash if it ever was missing)
- 'd' is always a dictionary
- There's no need to test if d['children'] is non-empty before looping
through it
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
dict.get(key) signals to people reading the code that you're not sure
whether the key exists. It returns None if it doesn't.
When the key is known to exist, dict[key] should be used. This also
helps catch bugs by raising an exception if the key is missing.
Similarly, whether a key in a dict should be tested with
if key in dict:
instead of with
if dict.get(key):
The second version signals that you both want to make sure that the
exists and that it's truthy (e.g., non-empty). That's confusing if a
simple existence check was meant.
There seems to be a bug in output_keyvalue_lines() where
fd.write("%s=%s\n" % (entry, defs[node].get(a)))
can end up writing '...=None'. Removing the .get() makes it throw an
exception instead. Keep the .get() for now and don't attempt to fix the
bug.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
dts will now generate DT_SRAM_BASE_ADDRESS, DT_SRAM_SIZE,
DT_FLASH_BASE_ADDRESS, and DT_FLASH_SIZE defines. Kconfig can utilize
these defines to set defaults for the CONFIG_ variants.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As a step to completing removing use of Kconfig defines in dts files we
need to change how we configure/set CONFIG_FLASH_LOAD_{OFFSET,SIZE}.
Previously we would set them based on how the chosen property
'zephyr,code-partition' was set to. If 'zephyr,code-partition' wasn't
set we would default the values to 0. We had some generic overlay logic
which would define 'zephyr,code-partition' based on
CONFIG_BOOTLOADER_MCUBOOT.
Going forward if the DTS has 'zephyr,code-partition' set we will
generate DT_CODE_PARTITION_OFFSET & DT_CODE_PARTITION_SIZE defines. We
will leave it to Kconfig to set CONFIG_FLASH_LOAD_OFFSET &
CONFIG_FLASH_LOAD_SIZE.
We introduce a python script that allows Kconfig to extract data from
the DTS and thus we can utilize DT_CODE_PARTITION_OFFSET and
DT_CODE_PARTITION_SIZE values to set defaults for
CONFIG_FLASH_LOAD_OFFSET & CONFIG_FLASH_LOAD_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rework extract_{controller,cells} so they aren't recursive. As part of
this change we take the flat cell array property and build a proper list
based on what the number of cells each element would represent.
Fixes#12724
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Because of differents in dtc versions the output of a list property may
vary. We would flatten the list of lists to a single list to match how
older dtc versions did things. Rather than doing that flattening in
multiple places, move it to get_reduced() so we do it just once.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The header comment in 'generated_dts_board_unfixed.h' was including
'compatible' as a helpful text.
But something has been broken with how we extract 'compatible' because
it was being evaluated to 'q'. Giving a confusing header text:
Generated include file q
Since the mechanism is broken, and does not appear to be important, we
remove it.
Also, modernize how we generate multi-line strings.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
extract_dts_includes.py has been generating DT output and then
concatenating it with fixup header files to create
'generated_dts_board.h'.
In this patch we instead introduce a source file named
'generated_dts_board.h' and have it \#include the appropriate DT
output and fixup files.
This results in a simpler system because users can now read
'generated_dts_board.h' as C source code to see how fixup files and
generated DT output relate to each other. Whereas before they would
have to either read documentation or python code to gain the same
understanding.
Also, it reduces the scope and complexity of one of our most bloated
python scripts, extract_dts_includes.py.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add support to generation script to generate defines for GPIO CS
[WIP], need to clarify some issues on how CS's look when we mix GPIO-CS
and HW CS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the ability to extract just a single instance from extract_cells and
extract_controller. This lets us pass in a prop_values like:
cs-gpios = < 0x02 0x11 0x00 >, < 0x03 0x05 0x00 >;
and extract just index = 1 if we want < 0x03 0x05 0x00 >.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move extract_cells and extract_controller functions into globals so they
can be utilized outside of just the main extract_dts_includes script.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We get warnings like:
foo.yaml('BAH') merge of property 'category': 'required'
overwrites 'optional'
This warning isn't meaningful as its reasonable to change the 'category'
of a property from 'optional' to 'required'. So don't warn in the case
anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Intel S1000 board has a SPI flash that isn't directly MMIO
addressable. For this case we shouldn't generate CONFIG_FLASH_SIZE or
CONFIG_FLASH_BASE_ADDRESS.
We use the heuristic of assuming if the flash node #size-cells is 0, its
a SPI flash. Than if the parent node (SPI controller) has only a single
reg element we assume its a non-MMIO addressable SPI flash. If there is
more than one reg element we assume the last reg element is the MMIO
address region for access to the flash.
Fixes#12530
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Changed arg parsing so you can invoke the script and only generate the
include file or conf file as desired.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support to generate defines of the form
DT_<COMPAT>_<INSTANCE>_<PROP>. The idea is that we can utilize this in
drivers to remove the need for dts_fixup.h. The <INSTANCE> value is
determined by the script and starts at 0 and counts up for each instance
of a given <COMPAT>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If an aliases already exists in the defs we should filter it out. Also
if an alias exists in the new_def we should filter the alias out.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The information message when processing the yaml files is
cryptic when there is an override. This change adds filenmae
of yaml file being processed and the parent tuple with
the override.
Signed-off-by: David Leach <david.leach@nxp.com>
We need to refactor how we determine CONFIG_FLASH_{SIZE,BASE_ADDRESS}
for when we have a QSPI that is memory mapped. "zephyr,flash" is going
to point the actual flash component that will be on a SPI bus and thus
the device node's reg property tells us which CS on the SPI bus its on,
not the memory mapped address/size of the flash.
So we make a few assumptions to handle this case:
1. If the #size-cells for the flash node is 0, we assume its a QSPI
memory mapped flash
2. That the QSPI memory mapped node (parent of what "zephyr,flash" is
point to, will contain a reg propery where the second reg pair will
be the memory mapped region for the flash.
We move handling of CONFIG_FLASH_{SIZE,BASE_ADDRESS} into flash.extract
so its all in one place.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The original version of get_binding didn't handle the case of having a
child node on a SPI or I2C device node. The example is a SPI flash and
having a partition node under that.
Re-work the binding lookup logic to first look in the master bindings
dict, and if not found there we assume it must be in the bus specific
dictionary, and we can use the parent node to find the bus type.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are cases in which we get the parents compat and thus we might
have a binding available for the actual node. An example is having a
SPI or I2C controller with a child node, but that node doesn't have a
binding associated with it. We'll end up getting the parent compat, so
return the parent binding in this case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For devices on buses like I2C or SPI its possible that a sensor might
support being on either bus type. In the dts we can tell this by
looking at the parent bus of the device. Its useful for a driver to
know this so can we build support into the driver accordingly.
For example if the LSM6DSL sensor ("st,lsm6dsl") is in the dts on a spi
bus we now generate:
#define DT_ST_LPS22HB_PRESS_BUS_SPI 1
Its possible that a system exists in which multiple of the same sensor
exist but on different busses, so drivers should handle that case
accordingly. For the LSM6DSL example we'd end up with:
#define DT_ST_LPS22HB_PRESS_BUS_I2C 1
#define DT_ST_LPS22HB_PRESS_BUS_SPI 1
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are a number of cases in which we a sensor can be either connected
on I2C or SPI. We've been treating these cases as different compatiable
properties, but they really should use the same compatiable and just
determine the info based on the parent bus in the device tree. We can
now support having two different binding files for the same compatiable
to handle the case of a sensor supporting either I2C or SPI as how its
connected.
We put "sensor" nodes in a bus specific dict bus_bindings[bus] that
we can than lookup later based on the DTS and determining the bus type
that the "sensor" node is on.
Fixes#11375
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have the yaml_list now have 'node', 'bus', and 'compat' information
instead of just the 'node' info. For now we have all YAML nodes under
yaml_list['node'], however this will change to support sensors that
can be on I2C or SPI, since they will have the same compat, but
different YAML nodes.
This also introduces yaml_list['bus'] which has YAML nodes for any
compatiables on a given 'parent' bus (ie, 'i2c', or 'spi').
Finally, we also have yaml_list['compat'] with all the compatiables
that we parsed and matched to a YAML.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change get_binding to take the node address instead of the
compatiable. This is in prep for having get_binding be able to look
at the parent of the node and determine which bus specific binding to
utilize (for cases like sensors that support both I2C & SPI).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add accessor functions get_binding and get_binding_compats to
encapsulate access to binding database info. Cleanup all direct access
to binding info and replace with calls to get_binding() and
get_binding_compats()
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Various functions like add_prop_aliases, extract_single_prop,
extract_single, reg.extract, compatible.extract, default.extract, and
flash.extract don't use the yaml argument that is passed to them.
Remove passing the argument, this is the first step in making access to
the yaml node information go through an accessor function.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the handling of 'inherits' in the YAML to right when we load. This
allows us to remove yaml_collapse function and will allow us to look
into the yaml right after we load it for things like if the yaml is for
a child bus.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removed Console dependencies from shell uart backend.
Generated define: CONFIG_UART_SHELL_ON_DEV_NAME for each board.
Fixes#10191
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
With python3.7 we get the following warning:
extract_dts_includes.py:496: DeprecationWarning: Using or
importing the ABCs from 'collections' instead of from
'collections.abc' is deprecated, and in 3.8 it will stop
working.
Fix this by using 'from collections.abc import Mapping' instead of
'import collections'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Default for a unavailable cell name was an empty list, whereas a
given name is a string. Leads to a runtime error if the name is given.
Make the default an empty string.
Names for cells are taken from the yaml binding. The key used is
"#cells" which clashes if there are different cell based properties
for a device. Readout names from the more specific "#xxx-cells" if
given and fall back to "#cells" if not given.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
Almost all labels generated by the extracting script are now prefixed
with DT_. The only exceptions are:
- stuff with 'base_label' specified in yaml bindings
- items specified by 'regs_config' and 'name_config' dictionaries
in globals.py module
- FLASH related labels generated by flash.extract() called separately
from generate_node_definitions(), e.g. FLASH_WRITE_BLOCK_SIZE -
these are used directly, not through fixups, from existing code
so I didn't want to touch them now
Labels generated for aliases are additionally prefixed with information
from the 'compatible' property, e.g. DT_GPIO_LEDS_LED0_* is generated
instead of LED0_*. To provide backward compatibility for code that uses
LEDx_* and SWx_* labels in their previous forms, a command line option
named 'old-alias-names' is added to the extraction script. This option
causes that the labels for aliases are generated in both old and new
forms. Currently this option is always enabled in dts.cmake.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Case when bus parent has more than one compatible was not treated
correctly. Use get_compat() method which returns first compat
in case several compats are available
Fixes#11121
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Allow directly calling the flash partition extraction function and
remove passing any arguments that the function doesn't actually use.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked flash partition extraction so we call it when we see a
node that is 'partiton@' instead of per property. We also handle the
'read-only' property in the flash partition extraction function which
lets us remove 'use-property-label' handling.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't have any cases that need 'use-property-label' related to
handling of reg extraction so lets remove it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support to the extract script to handle 'pwms' client properties.
This is pretty much identical to how we hand 'gpios'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Before dtc 1.4.7 we'd get something like the following for an gpios
property:
reg = <1 2 3 4>;
After dtc 1.4.7 we get:
cs-gpios = <0x05 0x0d 0x00>, < 0x06 0x00 0x00>;
We should handle both cases in the extract reg handling code. So if
we see a list of lists, we flatten it to a single list to normalize
the property.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Compat define is generated without value. This should not harm,
but since generated flag is a "Kconfig like" define, we migth need it
to hold a value.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Heuristic for populating an alias string for a subnode
of an alias node was wrong as there was no check if
alias already existed and string created was not in line
with device tree specfication (allowed chars: [0-9],[a-z], '-').
Fix these two points.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
We can replace the method get_node_label_string in DTDirective with the
global function get_node_label. This way we have a single place that
labels for defines are being generated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Don't based the compat to get_node_label, we can just figure out based
on the node address we are passed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Standard device tree properties like 'reg-names', 'interrupt-names', and
'phandle' should be handled by other extract mechanisms or ignored. So
filter them out before we even call extract_property
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We've never handled boolean properties well, if we had a boolean that
existed we'd generate a define of 'True' and if the boolean didn't exist
than nothing would be generated. So there was no easy way to tell that
the boolean wasn't defined.
Now if we mark a property as boolean in the yaml, we will generate a
define for it regardless if it exists or not. If it exists we'll
set the value to 1, and if it doesn't to 0.
Fixes#8376
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a function that given a node address we get a list of compats back
instead of just the first. This is in prep for eDTS support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Before dtc 1.4.7 we'd get something like the following for an reg
property:
reg = <1 2 3 4>;
After dtc 1.4.7 we get:
reg = <1 2>, <3 4>;
We should handle both cases in the extract reg handling code. So if
we see a list of lists, we flatten it to a single list to normalize
the property.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Python's open() by default using "system character encoding", which
may vary from system to system (e.g. LOCALE=C aka "ascii" on bare-OS
systems, something on Windows, etc.). But Zephyr files are utf-8, so
read them as such, by explicitly specifying encoding.
This is similar to changes earlier done to another script in 94620bd.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The 'id' field was never used and tended to just have the compat of the
node. Lets remove it and removed some code in extract_dts_includes.py
related to it. Added a warning if 'id' is set in a yaml so we can
remove it going forward.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For now we've used range properties as a pass through. However range
properties can translate from one address space to another. This is
typically used one address spaces translate from one physical bus to
another (For example going from PCI address space to internal SoC memory
map). However, we can also use this for cases where we want to reduce
duplication (For example with ARMv8-M for secure v non-secure MMIO
registers).
'ranges' takes either the form of:
ranges; /* pass through translation */
or:
ranges = <child-bus-address parent-bus-address length>;
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We use to walk to the full tree in search of addr/size cells. We should
only have to look at the parent of the node for these properties.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Given the path address to a node return the address/size cells. In
theory this should just be looking up the #{address,size}-cells in
the parent node, we'll make that cleanup next.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In case of having more than one reg, aliases would not generate
properly. Number of register at the end of define was missing.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
When the code partition is not at the beginning of the flash, the load
offset is wrongly computed. The address in the device tree is already
relative to the beginning of the parent node, ie the beginning of the
flash memory space. There is therefore no need to subtract it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The node name parsing for the _LABEL #define does not parse the unique
node portion in the same fashion between @<unit_address> and _<number>.
This change normalizes the two modes.
Signed-off-by: David Leach <david.leach@nxp.com>
If size or address cells happened to be 2 we'd get the wrong value since
we where shift the least significant 32-bit's up. Adjust the math based
on the value of the cell amount to fix things.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename address / size cell variable to clarify that its the number
of address / size cells.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
reg class is updated to take into account whole use cases
of reg extraction so extract_reg_prop could be removed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Parameter 'names' is provided as argument of several property
extract functions. Thought it is actually used only once.
Remove when not needed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
With have *many* violations on Zephyr's code, this commit is tackling
only the violations caused by headers guards. It also takes the
opportunity to normalize them using the filename in uppercase and
replacing dot with underscore. e.g file.h -> FILE_H
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Generate CONFIG_DT_COMPAT flags using available nodes
'compatible' property.
Store them in a bogus node_address key of defs dict so
duplicates could be removed.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Before dtc 1.4.7 we'd get something like the following for an interrupt
property in which #interrupt-cells is 2.
interrupts = <1 2 3 4>;
After dtc 1.4.7 we get:
interrupts = <1 2>, <3 4>;
We should handle both cases in the extract interrupt handling code. So
if we see a list of lists, we flatten it to a single list to normalize
the property.
Fixes: #9558
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A node alias name should be applied to the all property names.
Before this patch, the alias name is applied erroneously
just for CLOCK_CONTROLLER, skipping the CLOCK_BITS and CLOCK_BUS
property names.
Signed-off-by: Istvan Bisz <istvan.bisz@t-online.hu>
In addtion to zephyr/dts/bindings als scan the dts/bindings
directory within the application source directory for bindings.
Allows to have application specific bindings and drivers.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
When a DTS node has no 'compatible' property and its parent node has a
list for its compatible property, return only the first element of the
parent's compatible list.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Variables 'names' is copying value from 'reduced' dict and gives
illusion that any computation could be done on copied data.
Problem is that later computation on 'names' will modify data in
'reduced'.
Use deepcopy in order to avoid erasing thing in reduced.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
'defs' variable is used and passed as a parameter in the vast
majority of the functions of extract_dts_includes script.
Set this variable global
Do the same with 'struct' variable for upcoming change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Treat new generated dtc element 'alt-name' as usual aliases.
Aim is not to duplicate generation of node elements but provide
pointers using generic alternate names.
For instance, defining following overriding node:
arduino_i2c : i2c1 {};
Will generate following definition:
#define ARDUINO_I2C_LABEL ST_STM32_I2C_V1_40005400_LABEL
Then 'ARDUINO_I2C_LABEL' could be use a generic binding.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Allow use of new element of dtc grammar called overriding nodes:
i2cexp: &i2c2 {};
It allows a node to assign an alternate label to a node that
could be generic and used for adapter boards.
This commit is a derivative of a dtc commit from dtc v1.4.2 [1]
[1] https://bit.ly/2GFLLOa
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Do not provide info message if node type, title, version,
node description is overwritten.
This is the expected behaviour.
Fixes#8360
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
In some cases, node label could be generated with "/" character
in name string, which prevents compilation
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Commit 93d3a42776 changed the interface
of extract_controller() but did not change the recursive call within.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
