test_testinstance.py: Add testcases for check_build_or_run()
create_overlay() and calculate_sizes()
conftest.py: Module for common pytest fixtures
test_data/board_config: Adding test data for board configurations
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Address the nRF5340 Engineering A Errata 16, RADIO: POWER
register is not functional.
This affects the dependency of controller's HAL
implementation that expected correct reset values being
set in the Radio peripheral.
As the SUBSCRIBE_TXEN and SUBSCRIBE_RXEN where not in their
reset value, Radio transmission and reception start using
DPPI was broken.
Fixes#25942.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Avoid duplication of the encoding of the public device identifier by
using the constructing macro in definitions.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace individual device instance definitions with the macro that
expands to the equivalent change.
F='struct device DEVICE_NAME_GET'
git grep -l "$F" \
| xargs sed -i -r \
-e "s@$F"'\(([^)]*)\);@DEVICE_DECLARE(\1);@'
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This PR enables the user to configure the maximum command length for
OpenThread's CLI using Zephyr's shell, which is currently fixed to
256 characteres. This limitation was not enough for certain allowed
OpenThread commands, like some variants of 'ot dataset mgmtsetcommand'.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Right now shell pointer is not assigned before doing a scan, so scan
results are printed using printk(). Save shell instance in context, so
results are printed using shell_fprintf(), thus better aligned in the
console output.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The network statistics is stored for each traffic class, but the
collecting function was given net_pkt priority. The priority
must be first converted to traffic class and then the statistics
stored to correct place in the stats array.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User and implementation code may change the uuid pointer stored in
discover and gatt_read parameter structures, but it should never
mutate the pointed-to-value. Add a const qualifer so UUIDs stored in
flash can be referenced.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Some radio drivers need configuration before start-up. Up to now only
the RF2XX drivers allowed this, but other radio drivers need this as
well. In particular for setting EUI64 addresses.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This test was configuring the system tick period to 1 second.
The test also constantly aligns to system tick boundaries,
in between each test part, which means the test runs for very long
(it is holding for longer than 1 minute just on those waits between
tests alone).
The nrf sys tick driver configures the RTC to produce still
all RTC interrupts at 32KHz intervals, which cause lots of
interrupts which slow down simulation quite bit.
Overall the test could take longer than 30 seconds in the
nrf52_bsim in CI even that this platform simulated time is decoupled
from real time.
=> Add a new config overlay for the nrf52_bsim board so
we configure there a much higher system tick frequency
It does not affect the test in any way more than shortening
the wait periods between in test part.
Also increment the sys tick to twice per second to speed up
the test in other platforms.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Now that we are standardizing C99 integer types we can revert the commit
that warned about C99 type usage.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As the int types defined in include/zephyr/types.h are typdef's we
utilize a Kconfig option (LEGACY_ZEPHYR_INT_TYPES) to enable/disable
the support for them. By default to LEGACY_ZEPHYR_INT_TYPES not
being enabled and add an explicit test to ensure the types continue to
function until removed in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to using PRIu64/PRId64 instead of %llu/%lld since on
native_posix_64 the uint64_t/int64_t type is defined in terms of 'long
int' and not 'long long int'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
On 64-bit arch's like AARCH64, x86_64, or riscv-64 the way {u}int64_t
will differ from how its defined on 32-bit arch's. Do the same trick we
do for {u}int32_t for {u}int64_t so that the type is the same regardless
of what we are building for.
This keeps things like %lld working the same regardless of 32-bit or
64-bit arch.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When `z_get_fd_obj_and_vtable()` function returns NULL (no valid entry
in the FD table for the socket), there is no need for further usermode
checks on the `ctx` pointer, as there is nothing to invalidate in that
case.
Fixes#25990Fixes#25991
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Left unset it becomes the first partition, which is not what's used
for littlefs, and specifically isn't on the external flash for
nrf52840dk_nrf52840.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The flash interface header needs to be available regardless of
selected filesystem implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When millisecond/tick conversion is not exact tick delta's are
dependent on the initial tick value. In those cases exact comparisons
need to also allow an adjacent value.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When HFCLK has a slew making it faster than LFCLK the busy wait can
expire before the timer fires.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Reduce the duration of the timer test so that it will fire before the
busywait elapses even in the worst case of slew between the tick and
busy-wait clocks.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This test sets a timer using one clock, waits using a second clock,
then sees whether the remaining time is the expected value. When the
two clocks are skewed the comparison requires a threshold. Provide a
means to estimate the maximum expected error.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit updates the Zephyr documentation with changes introduced
by Zephyr CMake package.
It removes 'zephyr-env.sh/cmd' where no longer needed, and updates
boilerplate inclusion to find_package.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
These CVEs have been released from embargo. Include details in the v2.3
release notes, and in the vulnerabilities document.
Signed-off-by: David Brown <david.brown@linaro.org>
Some ticks are counted additionally when the autoreload
interrupts were too close together.
This patch improve the counts of the clock cycle.
lptim_fired worked badly in particular because the flag ARRM
was not raised when the interrupt was forced.
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
If ticks is K_TICKS_FOREVER the register autoreload isn't set.
So, on the next call to the z_clock_set_timeout function
the wait for the flag ARROK will be infinite.
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
