We now have all the logic for generating data suitable for reports in
one single place (json). The junit reports and in the future other
reports will be using this as input and generate reports using the json
data.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
An obsolete feature that is no longer being used due to the amount of
data that is needed per release and the fact it becomes stale very fast.
Instead, point to files directly for comparison.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Drop CSV generation which was the standard for sharing information since
the early days and instead use json with more content to share
information across sessions and for report generation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refine structure and accomodate more data, this report will serve as the
source for a testplan, reports and retries.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Specify why something was skipped (either filtered or through a ztest
case) and do not report testcases that are only being built as passed,
mark those tests as skipped with the reason specified as "Build only".
Keeping --no-skipped-report for now, although it has no impact.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Many option cancel out very already on,. so lets do this as part of the
option processing function first before we create workspace.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup main() and move logging code into own function.
This reduces clutter in main function and simplifies workflow.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There is a race condition in a multicore system that happens when the
idle thread in a CPU checks if the state was forced, if not it will
call the policy manager. If a secondary core forces a state after that
this point the value returned by the policy will be rewritten.
Another case is, if a state is forced while a CPU is sleeping,
when this CPU resumes, the forced bit is cleared and the forced state
is never be used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In pm_system_suspend there is a goto label that is supposed to be used
to do cleanup before exit the function but it is not doing anything
right now. Just remove it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This extends client implementation with Read Presets Request operation
support.
The implementation can maintain up to BT_L2CAP_TX_BUF_COUNT control
point requests so that user could perform/queue another Control Point
Operation if one is ongoing. E.g. preset can be selected from Read Preset
Response notification context or perform multiple operations if EATT
enabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
There is no need in the `flag_quad_io_en` field.
When QE enabling failed, then the driver `init` fails as well.
There is no way to use qspi in quad mode if qe is not enabled.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Adds support for 1-4-4 and 1-1-4 read modes.
SFDP is used to query for available read instructions, then the
fastest one is used.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
* Renames 4PP define to PP_1_4_4
* Adds PP_1_1_4 define
That matches linux kernel defines a bit more.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
nSIM SMP simulation is s bit slower than single-core one, so
let's increase timeouts for nsim_hs5x_smp platforms as we have for
nsim_hs_smp and nsim_hs6x_smp
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
On STM32WB and dual-core STM32H7 MCUs, the RNG peripheral is shared
between the cores and its access is protected by a hardware semaphore.
Locking was not performed in the current entropy driver, leading to a
race condition when multiple cores concurrently used the RNG. This
commit implements the necessary logic for locking the HSEM during entropy
generation on multi-core STM32 MCUs. It also reconfigures the RNG in case
the configuration was changed by the other core, as this can happen e.g
on STM32WB MCUs.
Signed-off-by: Thomas Altenbach <taltenbach@witekio.com>
CTE request tests were not working because there was missing
a code that sets conn.llcp.cte_req.is_enabled flag.
If the flag is not set, then the CTE request state machine
comletes its execution immediately as if the request was
disabled by Host in the meantime.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The periodic CTE_REQ disable command, requested by Host, may be locked
until connection is dropped due to missing CTE_RSP from peer device.
That is caused by implementation of CTE_REQ disable and CTE_REQ
control procedure handling.
The procedure is marked as active when CTE request was send to peer
device. It is marked as inactive after completion of the procedure.
That caused locking of CTE disable on a semaphore.
The BT 5.3 Core Spec, Vol 4, Part E, section 7.8.85 says the HCI_LE_-
Connection_CTE_Request_Enable should be considered active on a conne-
ction from when Host successfully issues the command with Enable=0x1
until a command is issued with Enable=0x0 or single LLCP CTE request
has finished (CTE_Request_Interval=0x0). Also there is a clarification
from BT SIG that the command with Enable=0x0 does not affect any
initiated LLCP CTE request. That means Controller is allowed to finish
already started procedure and it is not allowed to start new LLCP CTE
request procedure after completion of the command with Enable=0x0.
Taking that into account, there is no need to synchronize ULL and LLL
in regard of disable the LLCP CTE request while the procedure is
pending. Controller is free to complete the procedure or terminate it.
The change removes all code related with cte_req.is_active, disable
callback and waiting of ULL for LLL to finish the LLCP CTE request.
The ULL will complete the HCI_LE_Connection_Request_Enable with
Enable=0x0 immediately. In case the procedure is disabled in before
the response arrives, then further processing of the response is
dropped and the procedure context released.
The context is not released by the code responsible for disable
handling, to have single place where it is done.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There is an error in the condition that checks if new CTE_REQ should
be started after end of connection event. The condition verifies if
counter req_expire is set to zero. Then new CTE_REQ is started
irrespectively to CTE_REQ being disabled.
req_interval is used to store information if the CTE_REQ is:
- periodic, then value doesn't equal zero,
- single shot or disabled, then value equals zero.
The condition should verify if the req_interval is not zero and
req_expire is not zero. The second part of the if condition is
required to avoid starting next CTE_REQ until last one has been
completed.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Some of control procedures has set ctx->rx_opcode in rp_comm_tx
function to values that state there is an expected PDU.
This is not always true. In case of procedures that do not expect
any response from remote device, the ctx->rx_opcode should be set
to PDU_DATA_LLCTRL_TYPE_UNUSED.
In the worst cases scenario, when the same control procedure
is executed locally and remotely, correct response PDU may
cause an assertion in ull_cp_rx. It could happen because
of wrong ctx->rx_opcode value. A packet with opcode that is
set in remote and local control procedure context rx_opcode
will be treated as expected value for both. That is a situation
that cannot happen.
The commit changes the assignments of rx_opcode to fix the problem.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
If the echo flag is disabled the cmd_buff isn't printed and the
characters in it must not be counted in this function.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
The function k_thread_runtime_stats_all_get() now populates the
current_cycles field in the thread runtime stats structure.
Resets the number of cycles in the CPU's current usage window once
the idle thread is scheduled.
Fixes the average_cycles calcuation.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Adds a check that number of records to be encoded does not exceed the
maximum limit configured through Kconfig.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Setup peripheral and NOC apertures to make hs5x and hs6x configurations
runnable on real HW (HAPS).
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Renaming this reference got forgotten in
5f19c8160a [subsys/settings: Update
bluetooth module]
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This commit fixes the build errors for the testcases in
the tests/bluetooth/init folder
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The tests/bluetooth/ctrl_user_ext test fails due to
compilation errors, which are fixed with this PR
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
