Move the platform.h from the module to the zephyr tree. This file is
zephyr sepcific and belongs in the zephyr tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There is a race condition between the child threads
exiting, and the child threads getting re-used in the
next scenario. This reproduces more often on SMP systems.
Close the race by joining on the child threads before
exiting any test scenario.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In the code path for nested interrupts, we are not saving
RBX, yet the assembly code is using it as a storage location
for the ISR.
Use RAX. It is backed up in both the nested and non-nested
cases, and the ASM code is not currently using it at that
point.
Fixes: #29594
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As discuss in PR #28805, sloppy idle function still has some bug and
barely used, so we can remove it safely.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
using CONFIG_NET_BUF_POOL_USAGE monitor avail_count,
this variable should be protect.
Protecting it by using atomic variable
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Refactors nxp i.mx, kinetis, and lpc board-level device trees to use
DT_SIZE_K and DT_SIZE_M macros to define external memory sizes. This is
self documenting and easier to read.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors nxp i.mx, kinetis, and lpc soc-level device trees to use
DT_SIZE_K and DT_SIZE_M macros to define internal memory sizes. This is
self documenting and easier to read.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the mcux flexcan driver on i.mx rt socs by default when
CONFIG_CAN=y.
This fixes a runtime failure in tests/subsys/canbus/isotp/conformance on
the mimxrt1064_evk board:
Assertion failed at WEST_TOPDIR/zephyr/tests/subsys/canbus/isotp/conformance/src/main.c:883: test_main: (can_dev is NULL)
CAN device not not found
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Those devices can use several I2C address in order to address more
than 256 Bytes using 8bit addressing. Also several physical component
can be used as a contiguous memory.
Signed-off-by: Guillaume Lager <guillaume.lager@gmail.com>
This patch makes the initialization of workqueue earlier
for Nordic driver. Without this change Nordic devices
will fail tests/subsys/usb/device test as it is resetting
USB and by that will try to start already started workqueue
thread. This may lead to Zephyr fatal error.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
abort() is an important runtime function, oftentimes used to signal
abnormal execution conditions in generic applications. Worse, they
may be used under such circumstances in e.g. compiler support
libraries, in which case lack of implementation of this function
will lead to link error.
Fixes: #29541
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
k_queue_append and k_queue_alloc_append are in a race
condition.
Scenario:
Using either of the above mentioned functions from a
preemptive context, can lead to the element being
appended to the queue to be lost. The element loss happens
when the k_queue_append is interrupted at a critical point,
when the list only contains one element and k_queue_get is
called, before the k_queue_append is allowed to complete.
Fix:
Move sys_sflist_peek_tail inside queue_insert(). Add additional
bool paramenter to queue_insert(), to indicate append/prepend
operation.
Fixes#29257
Signed-off-by: iva kik <megatheriumiva@gmail.com>
This sample allows to test the led-pwm driver. The first "pwm-leds"
compatible device instance found in DT is used. For each LEDs attached
to this device (child nodes) the same test pattern (described below) is
executed. The LED API functions are used to control the LEDs.
Test pattern:
For each PWM LEDs (one after the other):
- turn on
- turn off
- increase the brightness gradually up to the maximum level
- blink (0.1 sec on, 0.1 sec off)
- blink (1 sec on, 1 sec off)
- turn off
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This driver supports the PWM driven LEDs. The devices are created from
the DT nodes with a compatible property matching "pwm-leds". For each
child node a LED is created and its "pwms" phandle's node is used to
retrieve the PWM configuration: channel, period and flags. If some of
this properties are missing (it is the case for some PWM controllers),
then reasonable default values are used.
This driver implements the following LED API methods:
- led_on
- led_off
- led_blink
- led_set_brightness
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
I2S signals should now be configured using dt.
For nucleo_f411re, I2S pins were configured using SPI definitions
that pulled the same strings behind the scene as I2S would have done.
This being said, only CK and SD pins should be needed and were
documented, so I only left those.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
With STM32Cube updates
https://github.com/zephyrproject-rtos/hal_stm32/pull/75
'..._hal_rcc.c' and '..._hal_rcc_ex.c' are now systematically
compiled, due to more and more dependencies from HAL IP on rcc.
So USE_STM32_HAL_RCC and USE_STM32_HAL_RCC_EX becomes useless.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Point to PR 75 of modules/hal/stm32/hal_stm32
stm32cube: update stm32f0 to version V1.11.1
stm32cube: update stm32f1 to version V1.8.2
stm32cube: update stm32f2 to version V1.9.1
stm32cube: update stm32f3 to version V1.11.1
stm32cube: update stm32f4 to version V1.25.1
stm32cube: update stm32f7 to version V1.16.0
stm32cube: update stm32g4 to version V1.3.0
stm32cube: update stm32h7 to version V1.8.0
stm32cube: update stm32l0 to version V1.11.3
stm32cube: update stm32l4 to version V1.16.0
stm32cube: update stm32l5 to version V1.3.1
stm32cube: update stm32wb to version V1.9.0
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This board has a multi-level power domain hierarchy where a sensor has
its own power control that is accessed through an external GPIO
peripheral that itself has a power control.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This provides structure for the regulator device hierarchy and a
driver for GPIO-controlled regulators along with its binding.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This PR follows Linux in defining devicetree content for generic
voltage and current regulators, and an initial driver API for
controlling them.
A regulator itself may depend on a power source, so it needs to
support the properties that enable that power source.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Provide a common set of properties for various ways of controlling
power:
* supply-gpios for a GPIO specifier acting like a switch
* vin-supply for a reference to a regulator device
Document the behavior expected when these properties are present.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Currently all provisioning procedure into common source
files call `prov.c`, that will not compile separately.
Add `BT_MESH_NODE` to control whether nodes are supported
and device provisioning is supported, this will be used in
provisioner role.
Add more provisioner OOB authentication method.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
In the flash partition definitions for ARM boards,
the link to the legacy partition macros does not
exist any more. The commit cleans up the partition
definition by removing this link.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Now that we have a BMI160 driver and emulator pair that support both
I2C and SPI, add a test that runs over both buses.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this driver only supports SPI. Refactor it so that SPI is
just one of the options. This does not change any functionality.
Signed-off-by: Simon Glass <sjg@chromium.org>
This emulator currently only supports SPI. Before making it also
support I2C, move it up a directory to avoid I2C uses missing it.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this driver only supports SPI. Refactor it so that SPI is
just one of the options. This does not change any functionality.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the logging for transactions to the functions that actually access
registers and sample data. This avoids needed to repeat this code when
I2C starts calling these functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the language to refer to a bus instead of SPI. This will make it
more applicable with I2C support is added.
Signed-off-by: Simon Glass <sjg@chromium.org>
This member holds the SPI bus pointer. Change its name to make that
more obvious and so that it can be used for an I2C bus also.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present there are three separate read functions and two write
functions. This makes it harder to provide an interface that can work
with either SPI or I2C.
Use bmi160_read() for all reads and create a new bmi160_write()
function for all writes.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this driver only supports a single instance. It sets up some
of its config in the init routine. It is better to put config in
constant data so that multiple instances can be supported and RAM space
is minimised.
Update the driver accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Currently a 'bmi160' pointer is used to point to the driver data. This
confusing, as the driver uses both data and config. Rename the variable
to 'data' like the bme280 driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
This driver uses verbose names for the config and data structures, which
makes it harder to see which one we are talking about. Shorten it, like
the bme280 driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: #28893
Now using get_filename_component(REALPATH) to ensure full path with
symlinks and `..` resolved.
Having `..` in path causes the gcc generated dependency file to contain
`\` in path on windows. This confuses ninja.
The result is that ninja consider the file missing, and thus invokes a
CMake run to create the file, resulting in endless loop.
By ensuring that full path (containing `/` which is already ensured)
when calling gcc, then all paths will be posix style, making ninja
happy.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
