Add uart bus interface to extended esWIFI driver. This enables all
Inventek modules with IWIN AT Commands firmware.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
The WIFI_ESWIFI_NAME config would be uselful when there is no device
tree alternative. The esWIFI driver already is on device tree and the
label property exists. This remove WIFI_ESWIFI_NAME Kconfig variable
and switch to device tree equivalent.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Remove global access to structure eswifi_spi_data variable. Instead,
add a method to pass access to that structure. This allows better
control to the data bus variable.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Do minor change of the descriptions and doxygen group name in order to
pave the way for generation the test specification.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The PA sync callbacks would have been registered for each new
PA sync, which would cause the callbacks to be called multiple times
if multiple PA syncs were created.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sync established event caused by a cancel by the host
was not properly handled. When cancelling the sync established
event is created, and the sync object should not be deleted
before that event is received.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This is a temporary workaround for an issue in TI's RF Driver
API. A subsequent release of the SimpleLink SDK will mitigate
the need for it and it can be reverted when hal/ti receives
that update.
Fixes#29418
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change reworks the cc13xx_cc26xx IEEE 802.15.4 driver to use
the TI RF driver API that is available in modules/hal/ti.
There are a number of benefits to using TI's API including
- a stable multi-OS vendor library and API
- API compatibility with the rest of the SimpleLink SDK and SoC family
- potential multi-protocol & multi-client radio operation
(e.g. both 15.4 and BLE)
- coexistence support with other chipsets via gpio
- vetted TI RF driver resources, such as
- the radio command queue
- highly tuned / coupled RTC & RAT (RAdio Timer) API
Fixes#26312
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Update documention to refer to MEC152x specifications and
SPI image generator. MEC152x is the actual production SOC.
The only difference is the Boot-ROM loader SPI image layout.
Preserve the link to the old, MEC1501 SPI image generator.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This is taking too long for every run and does not seem to work as
expected and wastes time instead of saving it. Remove for now..
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We do not need libgcc always, some environments do not have libgcc and
do not require it, so keep it more flexible.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Without the -Wno-typedef-redefinition option, clang complains if a
typedef gets redefined in gnu99 mode (since this is officially a C11
feature).
While new versions of GCC do not seem to issue this warning in gnu99
mode anymore. So some existing code with typedef redefined which works
well with GCC will issue this warning.
Similar to what was done in 2354f055ec.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add generated documentation content for known devicetree bindings
using the Binding abstraction which was just added to edtlib. This
works similarly to the way Kconfig content is generated, so extract a
bit of common helper code for doing that out and rename the relevant
files to keep the distinction clear.
Make the documentation build system respect a preset DTS_ROOT. In this
way, out of tree bindings can be added to the generated content by
telling the documentation build system where to find them, identically
to how out of tree bindings can be added to a Zephyr application.
Similarly, make the output directory configurable.
Fixes: #28865
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is a convenience function for creating a bunch of Binding objects
from files in a directory.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rework some section titles and separate the API into its own sub-page
in the reference section.
This is prep work for adding generated reference material on
devicetree bindings.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We can't control ticks accurately enough to detect the transition
between on a queue and being handled, so relax the checks to make
things pass.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
skips due to ram/rom overflow were captured as failures. Fix this and
count them correctly as skips.
Fixes#29412
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Minor fix for showing latest version in sidebar, no need for link here
that was added in recent commit.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There is a register misuse in leaving tickless idle code, which would
destroy exception/interrupt status. This commit fix this issue.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
In case of h/w setup with multiples device instances it is possible
that some of them wants to use triggers but not the others (no
interrupt line.
Since Kconfig configuration is the same way for all the instances
(CONFIG_LSM6DSL_TRIGGER=y), the driver behaves differently according
to how the device instance has been configured in the DT.
If irq-gpios is present, then the driver initialize the interrupt
part, else it skip irq init and returns ok, but data->gpio != NULL
xis checked in trigger_set() API.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move STM32 based board USB pin configuration to device tree.
Exceptions:
* olimex_stm32_h407: Node not enabled and not documented.
Signal added in disabled node.
* L0/G4 based boards as signals are not available yet.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Mention the newly introduced funtionality for Cortex-M
architecture to force the early-boot initialization of
internal architecture HW state.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Instruct Zephyr images that are loaded by MCUboot to
force the initialization of architecture core HW registers,
if the architecture supports the functionality.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Implement the functionality for configuring the
architecture core registers to their warm reset
values upon system initialization. We enable the
support of the feature in the Cortex-M architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We enhance the documentation of z_arm_reset, stressing that
the function may either be loaded by the processor coming
out of reset, or by another image, e.g. a bootloader. We
also specify what is required at minimum when executing the
reset function.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce an option that instructs Zephyr to perform
the initialization of internal architectural state (e.g.
ARCH-level HW registers and system control blocks) during
early boot to the reset values. The option is available
to the application developer but shall depend on whether
the architecture supports the functionality.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is redundant and not coherent with the rest of the file. Thus
remove the _BIT suffix from the bit field names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The current vector table is missing some (not used) entries. Fill these
in for the sake of completeness.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The SVC handler is not only used for the SVC call but in general for all
the synchronous exceptions. Reflect this in the handler name.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Only set friend_cred to true when friendship established and
use friend cred security material decryption successfully.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Fixes bug where applications that disable model extensions end up in an
infinite loop, and adds support for walking model subtrees, as opposed
to forcing root to be unextended.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
