Shell will display a warning message if there was a request to print
a message on the not initialized shell backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Disable shell print functions if the shell is not initialized.
Update tests accordingly.
Fixes#27161
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
Make explicit what registers we are going to be touched / modified when
using z_arm64_enter_exc and z_arm64_exit_exc.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Given the comment in `ipv6_event_handler`, the init function shall wait
for the last added IPv6 address to be confirmed with DAD. This is
contrary with current logic, which will only wait for the first address
to be confirmed.
This commit adds a break statement in the loop, not to overwrite the
recent address to verify with an older one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
PR #27485 introduced new implementations for close() that do not build
correctly. This commit fixes the problem by re-implementing them.
Fixes#27587
Signed-off-by: Vincent Wan <vwan@ti.com>
This adds an option to query the modem for the SIM's IMSI and ICCID
numbers, just like the modem's IMEI is queried today. This requires
the SIM to be present, which might not be the case for all
applications, so it can be disabled.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
A zero value in the NPH header indicates one parameter header.
Increase the upper bound to process the last provided table.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
GPIO CSn active level transitioned from default active-low to
devicetree defined since the last time this sample was verified,
requiring the flags parameter in devicetree to be updated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The default implementation is the same as this custom
one now, as the assertion that the context switch occurs
at the end of the ISR is true for all arches.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Zephyr has a policy of invoking the scheduler on the way
out of IRQs anyway for all arches, this is unnecessary.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If a thread is running, an ISR fires, and the ISR
itself calls k_thread_abort() on the thread, the ISR
was being unexpectedly terminated.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is covered in the porting guide, and we have complete docstrings
for these macros, but having discussion here helps new users understand
how to use these and why they exist.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Removed the check for selected_per_adv_sync as it was unused by the
create/delete functions (which take the index as parameters), and
caused the shell not to print any values.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The `free_per_adv_sync` pointer in `cmd_per_adv_sync_create`
did not work as intended, as it didn't actually update the
pointer in the array, which caused the
`cmd_per_adv_sync_delete` to not function as intended.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The header was missing the language linkage wrapper that allows the
driver-specific function to be located from C++.
Also it helps the poor user to be informed that the function is only
available when a special Kconfig option is set.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Short explanation of remote wake up:
The device has a possibility to wake up the HOST by sending
the wake up request. The request must be previously
explicitly enabled by the HOST just before the SUSPEND.
The HOST enables the remote wake up functionality by sending
SET_FEATURE request with remote wake up flag set to 1.
This ususally happens just before the device is suspended.
About this PR:
When the device decides to wake up the HOST it sends proper request.
Nordic USB HW is creating an event when the request has been sent.
The Zephyr USB device stack must proerly react to this event and
change the state of the device from SUSPENDED. For example if the
device was previously in CONFIGURED state it will remain CONFIGURED.
For state changes refer to Chapter 9.1.1 form USB 2.0 specification.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
- nRF21540 Front End Module Development Kit board definition
- nRF52840 MCU definitions based on nRF52840 Devkit files
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Expose the internal JESD216 function used to read data from the SFDP
region, and another function to read the JEDEC ID.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Some flash drivers are capable of issuing a JESD216 READ_SFDP command
to read serial flash discoverable parameters. Allow applications and
utilities access to API that reads the JEDEC ID from those devices.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Some flash drivers are capable of issuing a JESD216 READ_SFDP command
to read serial flash discoverable parameters. Allow applications and
utilities access to that capability where it's supported.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit reworks the SPI NOR driver to be more flexible in how
flash device configuration is obtained. Three alternatives are
supported:
* MINIMAL takes only the flash size from devicetree. The erase sizes
are hard-coded to the traditionally supported instructures.
* DEVICETREE requires that the data from the device's JESD216 Basic
Flash Parameters table be provided through devicetree. This
supports multiple page sizes and erase configurations, and lays a
foundation for significant enhancements in the future including
4-byte address, sleeping while waiting for operation completion, and
other features that are described by JESD216 parameters.
* RUNTIME requires nothing from the devicetree node, instead reading
the Basic Flash Parameters from the device at runtime. It extends
DEVICETREE by allowing the same firmware to run on boards with
different flash chips.
For MINIMAL and DEVICETREE the JEDEC ID from the devicetree node is
checked against the value read at runtime to confirm that the device
configuration is accurate.
The default SFDP source is MINIMAL.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use the new SFDP infrastructure to read the supported erase type sizes
and commands from the Basic Flash Parameters block. This removes the
need for explicit reference to most block sizes from this driver.
We're also seeing devices where the page size is not 256 bytes.
Accommodate them.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
With SFDP support we no longer need to get the JEDEC ID or device size
from devicetree. Make them optional in drivers that have been
converted to support SFDP. When runtime SFDP is not enabled the
presence of the required properties will be verified at build-time.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Allow the devicetree binding for a jedec,spi-nor device to provide the
device capabilities by encoding the Serial Flash Discoverable
Parameters Basic Flash Parameters table in the devicetree node. This
supports applications where a specific flash device will be used and
runtime discovery of device capabilities is not desired.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The spi_nor flash interface was designed for flash devices that use a
standard SPI interface to devices that are compatible with the Micron
M25P80 serial flash, identified in Linux as compatible jedec,spi-nor.
The JEDEC Serial Flash Discoverable Parameters standard (JESD216) was
designed to allow these devices to be self-describing. As we are
increasingly being asked to support flash memories that do not use
"standard" erase sizes or commands we need data structures and helper
functions to extract information about a flash interface at runtime.
For some of these devices the commands hard-coded in the current
implementation are simply wrong.
Define generic structures that support the SFDP hierarchy and the core
Basic Flash Parameters table. The description will also support
SPI-NAND and xSPI devices that conform to the JESD216 standards.
Add bitfield values and helper functions to extract some information
that drivers might need from JESD216 fields. At this time only
information that is likely to be used is extracted; more may be added
in the future.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The one provided in the spi_nor.h header is inappropriate for this
device, which doesn't support be32k. Also that definition is moving
into the spi_nor implementation file.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Removes redundancy on atmel_rf2xx.overlay message. Clarifies supported
variations section and notes about network on index.rst.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The dticks field was changed from a signed to an unsigned
value so now the assert test to ensure it isn't negative
is no longer needed.
fixes#26355
Signed-off-by: David Leach <david.leach@nxp.com>
In the function do_net_init() the paths for ipv6 and ipv4 now use the
same api to determine the source address.
Fixes#27428
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Use anytree module to display tree and to allow easy exporting into
json.
Add option to export results into a json file.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
