This change adds IEEE 802.15.4g (Sub GHz) support for the
cc1352r.
The 2.4 GHz radio and the Sub GHz radio are capable of
operating simultaneously.
Fixes#26315
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add a simple backoff mechanism between consecutive registration attempts
in case of registration failures. Finally, notify the application in
case the registration failed several times.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce TagoIO IoT Cloud HTTP post client example. This explorer
Zephyr network resources to demonstrate an end to end application.
The TagoIO allows that any user can test on a easy way Ethernet, WIFI
and Modem (PPP) with BSD sockets. The example provides overlays to
configure WIFI and Modem.
The application consists an a pseudo temperature sensor that sends
periodically data to TagoIO IoT Cloud platform. The data can be
visualized on a web browser dashboard, cellphone or tablet. The
steps to configure TagoIO are described on the example documentation.
Special Variables:
- CONFIG_TAGOIO_DEVICE_TOKEN DEVID token generated by TagoIO
- CONFIG_TAGOIO_HTTP_WIFI_SSID SSID when using WIFI
- CONFIG_TAGOIO_HTTP_WIFI_PSK PASSWD when using WIFI
- CONFIG_MODEM_GSM_UART_NAME UART label when using MODEM
- CONFIG_MODEM_GSM_APN APN when using MODEM
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The sample was producing quite a few `<log_strdup alloc failed>`
warnings when running in default configuration on qemu_x86. Increase the
log_strdup buffer count to prevent that.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add bootstrap section to the documentation, explaining how to configure
the Leshan Demo Bootstrap Server locally and run the sample.
Update the download link for the Leshan Demo Server, according to the
upstream Leshan documentation.
Fix bullet list with Leshan security parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add overlay-bootstrap.conf which allows to easily configure the sample
to use the bootstrap server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The es-WIFI driver is used by Inventek's es-WIFI shields. This enables
wifi sample to build all variations to ensures that dependencies are
meet.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
using CONFIG_NET_BUF_POOL_USAGE monitor avail_count,
this variable should be protect.
Protecting it by using atomic variable
Signed-off-by: Ehud Naim <ehudn@marvell.com>
It is useful to see the name of the handler thread for debugging
purposes so set it when starting the handler thread.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add commands to suspend or resume the GSM modem. These commands
might not be enough as at least the SIMCOM 808 modem requires
that the modem is reset when it is resumed, and this application
does not do any reset atm.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Testing the sample with Zephyr SDK 1.14 (vs 1.13) with qemu_x86
showed that it consistently crashes on 2th-4th iteration. Avoid
bite-sized increase this time, and dump stack considerably to
avoid constant need to update it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
It's copy of openthread conf from samples/net/sockets/echo_client,
but requires increasing of main stack size to avoid crash.
Also fixes building if CONFIG_LWM2M_DTLS_SUPPORT is enabled #28787.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
Remove obsolete include of the shell_uart.h file.
It is sufficient to include the shell.h file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
From 2.3 to 2.4 the net samples pair echo-server/client increase the
SRAM requirements. Since CI doesn't build all combinations, (even for
a release like 2.4.0-rc1) the problem was detected only now. Decrease
buffers for atsamr21_xpro on both echo_server/client sample pair.
Fixes#28341.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
After adding 'Multicast group filtering' (commit b7b73d0) server should
join CoAP IPv6 multicast group to accept multicast CoAP messages.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
Increase stack size to 1200 for echo and echo_async sample apps
(following a similar increase done to echo_async_select previously).
With default stack size, the apps no longer run (crash QEMU) with
Zephyr 2.4-pre.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The default timeout used (500 ms) turns out to be too small for certain
servers (test.mosquitto.org), rendering it impossible to connect (the
TCP connection was closed before the actual Connect ACK response
arrived). Increase the connect timeout to cover this case.
Fixes#28181
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
APP_TX_RX_TIMEOUT and APP_NET_INIT_TIMEOUT were not used in any way
in the sample and test apps.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add the supported features section to serpente.yaml and overlay files
to the corresponding tests and samples.
Signed-off-by: Alexander Falb <fal3xx@gmail.com>
Given that TLS/DTLS socket now creates an underlying TCP/UDP socket, the
FD consumption is increased in echo_client and echo_server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If user has enabled SOCK_DGRAM support for AF_PACKET type, then
use that in the packet sample application instead of SOCK_RAW.
This simplifies the application as we do not need to handle
the Ethernet frame when sending or receiving the packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Instead of unknown clock accuracy, set it to 1ms for native_posix
boards. This looks better in TSN monitor.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add gPTP multiport support to native_posix Ethernet driver.
This means that the driver is able to create more than one
network interface and enable gPTP to each of them. This requires
that net-tools is updated as it contains configuration file
for network interfaces in host side.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create two threads, one for receiving packet socket data and
the other for sending raw Ethernet frames.
Add flood option where it is possible to stress test the IP
stack. Flooding is disabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit allows let build zperf sample with overlay-netusb.conf.
USB subsystem must be enabled by the application.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Remove dependency on CONFIG_BT_ACL_FLOW_CONTROL and use
CONFIG_BT_L2CAP_RX_MTU always to set L2CAP RX MTU.
The ATT MTU is set from two different KConfig options depending
on if CONFIG_BT_ACL_FLOW_CONTROL is enabled, which makes it
a confusing option and hard to provide a conf file that
supports multiple board configurations.
This changes the behavior when CONFIG_BT_ACL_FLOW_CONTROL and
CONFIG_BT_BUF_RX_LEN was used to set the L2CAP RX MTU, and by
extension the ATT MTU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
