Convert all canbus related API/samples/tests/subsys
to the new timeout API with k_timeout_t.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Topic subscribe() will allow cloud to send messages to
device. There will be a bit of network delay. But mqtt_input
was called only after publish() which will trigger every
10-15 seconds. Which is causing more delay to read published
messages from cloud even though messages are already available
at socket level.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Rather than redefining a macro which might be generated we should create
a new define name that should get used in the code. Replace redefining
DT_ALIAS_LED0_GPIOS_* and just use the LED_GPIO_* defines that already
exist.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit renames all local definitions with the name `PORT` in the
net samples, in order to prevent name conflict with certain HALs
(notably, Atmel SAM E5x HAL).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Reworked spi_sam driver to utilize new DT_INST macros as part of
this rework we also now get pin ctrl/mux configuration information
from the device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. Removed per
instance Kconfig symbols and replaced with DT_NODELABEL references where
needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Those are used only in tests, so remove them from kernel Kconfig and set
them in the tests that use them directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This application was initially intended to be a manual, interactive
sample, run by a user. However, it's also a useful real-world
integration test, to be run in automated CI systems. So, provide
a config suitable for such a usage: use local host machine as a
server (to not depend on availability and characteristics of an
Internet connection), and have a concrete completion criteria
(by limiting number of iterations; given that performance of TCP
is not to be not too high, limit it to just 1 for now).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Initially, this was intended to be a sample for manual "burnout"
testing, e.g. see if a device with it can run for 24hrs, or download
1GB of data, or similar.
It's however also useful for automated CI testing, but then we need
to have more specific completion criteria. So, allow to specify
number of download iterations via local Kconfig.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To streamline management of multiple test configurations (which
now can go into separate config/overlay files instead of patching
source).
Note that now that this option is introduced, it must be set to
a correct value for any Zephyr config, thus we set it in
overlay-tls.conf. But the sample also supports building under a
POSIX environment (using Makefile.posix), which doesn't use
Zephyr's config system, so suitable defaults still should be
present in the C source file.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Mention in websocket API documentation that the timeout value
is in milliseconds. Check timeout values properly using K_TIMEOUT_EQ()
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use k_timeout_t internally, no change to user API.
Clarify the documentation of the timeout parameter that it is
in milliseconds.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 64-bit time in order to avoid overlaps, and do not use K_MSEC()
as that will convert to k_timeout_t which we do not want in this
case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove prompts from Kconfig options `UART_x_NRF_UART*` that select
the type of nrfx driver (for UART or UARTE peripheral) to be used
for a given instance. This prevents the options from being modified
from configuration files.
Instead, make one of these options selected by default according to the
"compatible" property set for the corresponding UART node in devicetree.
This eliminates the need of changing both the "compatible" property in
devicetree and the Kconfig option selecting the driver type when a user
wants to switch between UART and UARTE for a given instance.
Since all `UART_x_NRF_UART*` options are made "hidden" by this commit,
all their occurrences in configuration files are removed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit removes the Kconfig MAC address configurations for the
`sam_e70_xplained` board, as these have been migrated to use the device
tree configurations.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The MAX_PAYLOAD_SIZE must reflect the size of COAP_BLOCK_x. This is
necessary becase BLOCK size represents max payload size. The current
value create inconsistencies for coap lib. The same way,
MAX_DOWNLOAD_DATA must allocate sufficient space for MAX_PAYLOAD_SIZE
plus all space for coap header etc.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This is a follow-up to commit 4253eae005.
The board known earlier as nrf52840_pca10056 is now named
nrf52840dk_nrf52840.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Just to get something to test for PM, via frdm_k64f board. So only this
board will get PM enabled.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In addition to the existing plain TCP MQTT test, add the same test
with TLS applied. Robert Lubos provided the updated test_cert.h, which
contains the same certificate as in the echo samples.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
OpenThread NCP sample application.
Tested on FRDM-K64 with RF2XX connected via USB to a Linux machine
running wpantund.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Cloud to device communication supported with simple
subscribe topic details. Details are added for how to send
messages from cloud.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No use starting the application if the network interface is down.
So start to listen connection management events and start the
TCP and UDP handlers only after network is up and ready.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Modify the mqtt_publisher sample app to return an exit code after
its tests have been run. Add Kconfig options to set the number of
test iterations per TCP connection as well as the number of TCP
connections to make to the server while keeping the default values
intact. Further add a config overlay file to lower the number of
TCP connections and test iterations used.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Without it, the sample crashes for qemu_x86 with:
[00:00:03.080,000] <err> os: Page fault at address 0x7275632f
(error code 0x10)
[00:00:03.080,000] <err> os: Linear address not present in page tables
[00:00:03.080,000] <err> os: PDPTE: Non-present
...
Increase by reasonable, but small amount, to keep watching stack usage
growth trends in Zephyr.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Once the MQTT ping response has been received from the server, the
application is then notified with the MQTT_EVT_PINGRESP event.
Signed-off-by: PK Chan <pak.kee.chan@nordicsemi.no>
In order to run the TTCN-3 based sanity check, add a TCP
sample app and instructions for running the sanity check.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add information about how to build and test atsamr21_xpro board with
IEEE 802.15.4 RF2xx driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add special configuration for SAMR21 SoC. Since it have only 32k SRAM,
all possible application buffers need to be shrinked.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add information about how to build and test atsamr21_xpro board with
IEEE 802.15.4 RF2xx driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add special configuration for SAMR21 SoC. Since it have only 32k SRAM,
all possible application buffers need to be shrinked. This
configuration was tested with two boards for more than 2H with success.
[02:18:57.635,00] net_echo_server_sample: IPv6 UDP: Sent 333000 packets
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
UDP portion of the echo_client sends 1 packet with the sample data.
(TCP can send chunks of it depending on the response of the send()
function.) Not every network interface can send a UDP packet large
enough to handle the size of the sample data.
Let's make sure to account for the network interface MTU when deciding
the amount of sample data to send.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/22447
Signed-off-by: Michael Scott <mike@foundries.io>
Use new API to configure and interact with GPIOs. Move GPIO
initialization from sample into driver. The existing physical/line
level control has been kept rather than converting to logical level
signals.
Also improve error messages.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Eliminates CI build warnings such as this which breaks the build:
warning: NET_SOCKETS_POSIX_NAMES
(defined at subsys/net/lib/sockets/Kconfig:13) was assigned the value
'n' but got the value 'y'.
The testcase involves no offloading, which means it does not apply to
cc32xx.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This PR eliminates the Kconfig warnings seen in build by setting the
options to the appropriate values for cc32xx platforms. They were
causing CI failures.
Fixes#22388
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Add Kconfig option NET_SAMPLE_SEND_ITERATIONS that sets the number of
times the Zephyr echo client sample sends its data. By default the
value is zero, which means indefinite, and demonstrates the same
behavior as before.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This count is assigned to CONFIG_BT_ACL_RX_COUNT which expects a number
in the range of 1-64, otherwise kconfig fails.
Fixes#22259
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Switch to `NET_SOCKET_REGISTER` mechanism over the offloaded API
registration.
Including the following fixes from the review:
* The fd returned by the socket accept call needs to be finalized,
similar to how it is done for socket creation.
* sl_RecvFrom() in TI SimpleLink Host driver does not support NULL
pointers for 'from' address and address length, and sl_SendTo() does
not ignore the destination address when in connection mode, so passing
NULL would cause a failure. These issues have been reported to TI
(CC3X20SDK-1970, CC3X20SDK-1971).
Let's use sl_Recv and sl_Send to implement recvfrom/sendto in the case
of NULL addresses.
* simplelink_poll() should not process negative file descriptors in the
fds array after sl_Selecti() returns. A negative fd value indicates
that the entry is invalid and should be ignored.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixed bug in udp.c in echo_client and echo_server samples.
The bug causes UDP sockets to not close if socket id is 0.
Signed-off-by: Magne Værnes <magne.varnes@nordicsemi.no>
Make sure that the echo-server compiles ok if IPv6 or IPv4 is
disabled when VLAN is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to better handle incoming data, wait() should return
the # of sockets with data returned by poll().
Based on this new return value, we can call mqtt_input() in a
smarter way.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that mqtt_live() can send an EAGAIN message meaning: no ping
was generated, let's handle that in process_mqtt_and_sleep() by
skipping the call to mqtt_input() since no data will be expected.
Signed-off-by: Michael Scott <mike@foundries.io>
Make sure that we do not calculate terminating \n when comparing
the received data to sent data because the \n is not part of
the lorem_ipsum buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Sample app compiled with the GSM modem driver enabling PPP.
This sample was tested with a Reel Board UART_1 connected via the
external board/connector and a FONA 808 modem. Reel board specific
suppor is found in boards/.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Echo-server sample should not bail out on failed
accept() calls. This sample should close socket
in case of any errors and keep listening on socket
for further incoming connections.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current sample certs and keys are not signed. Adding
signed certificates and keys. CA file also added.
This helps users to test with different kind of
configurations.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
A sample implementing NATS protocol that is not part of the Zephyr
networking subsystem. The implementation is not maintained and only
served as a proof of concept.
Related to #20017
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
`TLS_PEER_VERIFY` and `TLS_DTLS_ROLE` options accept specific values,
yet no symbols were defined for them. In result, magic numbers were used
in several places, making the code less readable.
Fix this issue, by adding the missing symbols to the `socket.h` header,
and using them in places where related socket options are set.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This add details how build and flash the application. This diferentiate
between SoC and transceivers to help understand what user need to do to
build and flash successfully.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Create overlay-rf2xx.conf overlay file to enable Atmel rf2xx
transceivers on this application.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
OpenThread settings implementation built on top of Zepyhr settings
submodule.
With this solution, OpenThread settings are identified with keys of
the following format: `ot/id/instance`, where `id` is assigned by
OpenThread stack, and `instance` is a 32-bit random number, both in
hex. The implementation makes use of `settings_load_subtree_direct`
function to iterate over settings instances. This allows the
OpenThread settings layer to be a fully transparent shim layer between
OpenThread/Zephyr APIs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Define CONFIG_NET_CONFIG_IEEE802154_DEV_NAME value necessary to enable
atsamr21_xpro board on wpanusb sample.
The documentation was updated referencing the atsamr21_xpro board.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The $srctree environment variable is already set to point to the Zephyr
root, so no need to do
source "$(ZEPHYR_BASE)/Kconfig.zephyr"
in samples. Just
source "Kconfig.zephyr"
works.
(Things would break if $srctree was set to anything else, because every
'source' in the Kconfig files will be relative to it.)
Also add a 'mainmenu' title to the littlefs sample. It shows up at the
top of menuconfig/guiconfig. Source Kconfig.zephyr instead of Kconfig to
avoid overriding it.
As a sidenote, $(FOO) is better $FOO in Kconfig. $FOO is legacy syntax
that Kconfiglib only supports to be compatible with old Linux kernels.
$(FOO) uses the Kconfig preprocessor.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
x86-mmu now crashes with default 1K, bump to 2K, which hopefully might
work even for 64-bit archs.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Include stdlib.h to suppress a missing declaration
warning for exit() when compiled as a Linux target.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Same deal as in commit bd6e04411e ("kconfig: Clean up header comments
and make them consistent") and commit 1f38ea77ba ("kconfig: Clean up
'config FOO' (two spaces) definitions"), for some newly-introduced
stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Allow to build also for general boards with supported ieee802154 and
usb, like reel_board, etc.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Create cc2520 overlay file. Can be used with:
cmake -DBOARD=quark_se_c1000_devboard \
-DOVERLAY_CONFIG=overlay-cc2520.conf ..
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This reverts commit da0f3311ff. It was
clearly intended to be a debugging aid when developing TCP2, not
intended for mainline. This fixes building this sample on POSIX
systems with Makefile.posix.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The sample needs key.c file but that cannot be generated by
sanitychecker. So disable compilation by sanitycheck.
Eventually we should make it possible to compile the sample
using some pre-defined values so that the sample will not
bit-rot but that is for later.
Fixes#21450
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
MQTT Azure and Google IoT samples are based on cloud
infrastructure. It would be nice to place all cloud
based samples in one single folder.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The application main() in Zephyr is defined as having a prototype:
void main(void), as expected by the kernel init (bg_thread_main).
So, correct the different samples and tests that were defined
otherwise.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This samples demonstrates how to connect to Azure Cloud
IoT hub which is based on MQTT protocol. User has to
create an account in Azure Cloud and provide those details
using Kconfig options. This sample first acquires DHCPv4
address and opens a secure connection with Azure cloud.
Then opens a MQTT connection and publish messages randomly.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The example should work on the cc3220sf_launchxl by following the same
flow as on other boards, ie. by connecting with plain http by default
and use TLS only when an overlay is specified. We update the
configuration for cc3220_launchxl to not use TLS by default and the
README to point users to the right overlay file to use.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If we ran out of net_buf's while sending, ignore the issue
and try to finish the test instead. Solving the "running out
of network buffers" case would require careful tuning of
number of network buffers, buffer size, upload speed etc. which
is difficult to solve with generic buffer count options.
The user should tweak mainly the CONFIG_NET_BUF_TX_COUNT option.
Optionally CONFIG_NET_PKT_TX_COUNT can be changed too. Information
about these options is printed to console after the test is finished.
Fixes#20315
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add "sample quit" shell command which can be used to stop the
sample application and allows the generation of coverage report.
Fixes#21099
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The definition was removed in commit 7ccc7889fa ("logging: Remove
SYS_LOG implementation").
Adding detection of unused symbols in samples and tests to CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
echo_client and echo_server configuration for 802.15.4 and OpenThread is
covered by overlay files and default board configuration. Board-specific
configuration for frdm_kw41z was redundant in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
For some reasons SOC_SERIES_SAME70 was selected in civetweb sample,
which prevents build on other platforms.
This issue was silent since sample yaml file limits sample testing on
sam_e70_xplained.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
echo_server crashes if the coverage is enabled due to the insufficient
stack size.
Use bigger stack size when the coverage is enabled.
Fixes#20797
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Several macros were documented as deprecated but lacked the
infrastructure to produce deprecation warnings. Add the deprecation
marker, and fix the in-tree references to the deprecated spellings.
Note that one non-deprecated macro should have been deprecated, and
is, referring to a newly added line control bit.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
As the iPerf2 protocol is not documented properly, depend on
exact iPerf 2.0.5 version when testing.
Fixes#20313
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Quit the accept loop if there is a socket related error as there
is no point of continuing in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
PSK support is added to echo-client.c and echo-server.c.
If enabled, a header is included which contains the PSK.
If the default dummy PSK header is used, a warning is issued.
The header can be changed via Kconfig.
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
Not a top-level zephyr core API and tied to third party environment, so
move it to where the code is in lib/updatehub.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In order to be able to run the sanity check, don't open the socket
if the test protocol is enabled.
Also add a debug print at the recv().
This commit will be dropped:
- As soon as the sanity check site accomodates
- As soon as the integration is complete
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This adds a multithreaded dumb HTTP server sample application similar
to dumb_http_server with following differences
* support both IPv4 and IPv6 simultaneously
* support multiple incoming connections
* support TLS connections
* ignore POSIX compatibility
This app can be used for testing. Note that the app will always
serve a same static HTML page to caller regardless of HTTP request
parameters.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the socket samples had wrong information about what default
board to use. Currently there is no default board and user must
select the board when building the application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Instead of printk(), use logging macros so that all the output
from IP stack and sample is nicely interleaved.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network shell is useful to have in order to debug things so
enabling it for this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
