The dmamux requires HEAP size definition, so that k_malloc
is valid. The HEAP size config is defined in the common for
any stm32 soc instead of specific to dma Kconfig
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for the ARM DesignStart DAPLink board for Digilent Arty
S7/A7 (V2C DAPLink) shield.
This shield is designed to be used along with the ARM Cortex-M1/M3
DesignStart FPGA reference designs running on the Digilent Arty.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add missing default for enabling CONFIG_SPI if CONFIG_FLASH is
enabled. This is needed for CONFIG_SPI_NOR.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The ARM Cortex-M1/M3 DesignStart FPGA reference designs support booting
from an off-board, memory-mapped QSPI NOR flash device. The V2C DAPlink
shield from ARM Ltd. provides support for this feature.
If the board/shield is not configured for booting from the QSPI NOR
device, that same device is available as a regular QSPI NOR flash
device.
The presense of a shield configured for QSPI NOR flash boot is indicated
through an IRQ line used as a level-detect, non-interrupt signal.
Introduce a board specific devicetree binding for the DAPLink QSPI MUX
and provide a board specific API accessing it. Automatically set the
QSPI MUX to to provide regular QSPI NOR flash access if the board/shield
is not configured for memory-mapped QSPI NOR flash boot.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Updates west.yml to use modules/tee/tfm commit number
143df675557305b61f7930a50459a53a8d2bb097.
Change: make BL2 configurable.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Configures the Non-Secure target to work with TFM.
Memory (Flash and RAM) mapping according to TFM definitions.
How to build and flash the board.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Signed-off-by: Kevin Townsend <kevin@ktownsend.com>
Moved the flash partitioning to the shared device tree include so all
targets can benefit from the partitioning.
This is implemented to MCUboot can run TFM(S) with Zephyr
(lpc55s69 cpu 0 NS).
Also defines RAM partitions as TFM expects them, first part of ram for
S, second half for NS.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Configure build variable BL2 depending on board configuration. BL2 is
set to True by default. BL2 enabled building TFM with MCUboot.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
When running shell commands updatehub alloc data from shell stack.
Increase shell room stack to avoid shell issues. Memory tuning
should be performed accord with available resources.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Currently updatehub trust on MCUboot to test a new image. The process
is executed on next boot after a validate the downloaded image. To
have a more reliable system, is recommended run the SHA-256 algorithm
to attest that firmware was properly stored on the flash memory. This
implements the use of flash_img_check to achieve that, and as a
consequence, add a new level of trust that avoids an useless reboot
on the system.
Updatehub uses two SHA-256 verification. One is used to check the
data stream at download. The second one, realise the verification
reading from flash. Users have the possibility to chose only one
option or keep both verifications. However, it is adviced keep
always both verifications enabled to get consistent reports on
back end.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Currently SHA-256 uses a temporary hash digest to calc final sha sum.
This moves temporary variable from local scope to updatehub context.
The motivation is to use the hash digest on future flash validation.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Remove the BT_LL_SW_SPLIT dependency for
BT_CTLR_DEBUG_PINS_CPUAPP when building CPUAPP application
that is using Zephyr BLE HCI controller on the CPUNET core.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a Bluetooth Peripheral sample that demonstrates how to use
GATT Object Transfer Service.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When the connection is terminated, make sure that any pending
data is feed to the application.
Fixes#28057
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
VCO input frequency can be checked and set during compile time.
It unfortunately does not work for output frequency because macros in
HAL are defined together with uint32_t type.
This also fixes wrong check in case of HSI used as PLL source.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
Add the supported features section to serpente.yaml and overlay files
to the corresponding tests and samples.
Signed-off-by: Alexander Falb <fal3xx@gmail.com>
timeslice terminology were used in connection with synchronization
using ll BLE ticker.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Rework ticker synchronization using newly introduced
radio synchronization API.
In kconfig synchronization using ll ticker become choice
option.
If CONFIG_SOC_FLASH_NRF_PARTIAL_ERASE is enabled the erase
timing is changed so intervals become similar to slots duration.
Previously interval was always ~90 ms, which looks like it was kept
so disproportional by oversight while the partial erase was
introduced.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Extract synchronization procedures using LL BLE controller
ticker to newly added synchronization API.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduced API which allows to decouple radio synchronization
mechanism from NVMC driver.
New API will allows to replace synchronization mechanism if required.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add handling of the HCI_Hardware_Error event to log the hardware code.
This event was unmasked in set_event_mask.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use time(), localtime_r(), and asctime() to confirm that the
declarations required for these (newlib) libc functions are made
available in CONFIG_POSIX context.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some of what's supposed to be in <time.h> was lost because this header
attempts to define everything using more primitive include files.
Instead incorporate the contents from the toolchain-provided header.
Any gaps should be picked up by the legacy content present in this
file, which should not conflict with the toolchain header.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a name to the Kconfig choice that selects the controller TX power.
This allows board `*.defconfig` files to change the default TX power
as their certifications warrant. For example:
```
choice BT_CTLR_TX_PWR
default BT_CTLR_TX_PWR_PLUS_4
endchoice
```
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Identify the special case of /zephyr,user as a node for which property
values are generated without having to define a binding.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Tell the EDT instance that properties of the /zephyr,user node should
be generated based on the binding types inferred from the property
content.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Clean up of devicetree tooling removed generation of information
present in devicetree in nodes that have no compatible, or for extra
properties not defined by a binding. Discussion proposed that these
properties should be allowed, but only in a defined node /zephyr,user.
For that node infer bindings based on the presence of properties.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Preserve the TX power set with the `BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL`
command for advertising and scanning procedures. As the TX power is no
longer overwritten on procedure start, the TX powers can now be set
before starting the procedure. This eliminates the chance for the first
transmissions to use the default TX power instead of the request TX
power.
Similar changes are not made to the connection advertising powers as
changing the TX power for a connection to device A should not change
the TX power for a future connection to device B using the same
`struct lll_adv` instance.
Fixes#27921.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This adds few tests for handling scan response in ext commands:
- trying to set scan response on non-scannable instance should fail
- it should be possible to create scannable instance, set scan data,
enable and then disable set
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
ADI field is optional in AUX_SCAN_RSP so by default it's disabled, but
now we'll have an option to include it.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
When aux is upated, DID is changed and unlike SID it's only stored in
aux PDU. To allow quick access to new DID value, let's just optionally
return current ADI value after aux was updated. It will be useful e.g.
when updating scan response data if we want to put ADI there.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This enables processing of AUX_SCAN_REQ and sending back AUX_SCAN_RSP
on non-connectabe scannable advertising instances. Similar path will
be used for AUX_CONNECT_REQ so there are few references for connectable
as well, but this is not supported as for now.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds restrictions for setting scan response data as specified by
Core spec:
* on legacy, only complete data can be set
* on legacy, data cannot be longer than 31 octets
* on ext, if non-scannable, data can only be discarded
* if ext enabled, only complete data can be set
* if ext enabled, data cannot be discarded
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This allows to set scan response data using ext adv commands.
New AUX_SCAN_RSP can be created without analyzing previous PDU since
the only value that need to be copied from previous PDU is AdvA which
is placed at fixed location. TxPower is omitted since, if enabled, it
is already present in AUX_ADV_IND and does not need to be presed in
other PDUs. ADI support is to be added later.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
AdvA in aux is mandatory for any connectable and scannable set so make
sure it's always added.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
