Aurelien Jarno 9107e3dac8 drivers: usb: add support for USB OTG FS on STM32F7 ... The STM32F7 uses the same USB OTG FS controller than the STM32F4 series. It is therefore trivial to add support for it, by adding the DT fixup and pinmux macros, and the DT entries in stm32f7.dtsi. Keep it disabled, it should be enabled at the board level. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>		2018-07-11 16:28:10 -05:00
..
mem.h	arch: arm: stm32: add basic support for STM32F769 SoC	2018-07-06 09:56:25 -05:00
stm32f1-pinctrl.dtsi	soc: stm32f1: add port uart4	2018-05-25 11:58:20 -05:00
stm32f1.dtsi	dts/arm/st: Fix I2C1 clock property	2018-07-06 09:46:57 -05:00
stm32f2-pinctrl.dtsi	driver: uart_stm32: add support for stm32f2 series	2018-07-05 11:26:07 -05:00
stm32f2.dtsi	driver: uart_stm32: add support for stm32f2 series	2018-07-05 11:26:07 -05:00
stm32f3-pinctrl.dtsi	dts/st: dtc v1.4.6 warnings: pin-c... node has a reg ... no unit name	2018-04-24 14:46:48 -05:00
stm32f3.dtsi	dts/arm/st: Fix I2C1 clock property	2018-07-06 09:46:57 -05:00
stm32f4-pinctrl.dtsi	dts: arm: st: Correct pin assignment of node usart6@0	2018-07-02 09:48:20 -05:00
stm32f4.dtsi	dts/arm/st: Fix I2C1 clock property	2018-07-06 09:46:57 -05:00
stm32f7-pinctrl.dtsi	dts: stm32f7-pinctrl Add definitions for F7 USART/UARTs	2018-07-05 11:24:33 -05:00
stm32f7.dtsi	drivers: usb: add support for USB OTG FS on STM32F7	2018-07-11 16:28:10 -05:00
stm32f030.dtsi
stm32f030X8.dtsi	dts/stm32: add clock property to spi nodes	2018-07-05 11:16:38 -05:00
stm32f030Xc.dtsi	dts/stm32: add clock property to spi nodes	2018-07-05 11:16:38 -05:00
stm32f051.dtsi	arch: arm: STM32F051X8 support	2018-03-10 11:42:25 -06:00
stm32f070.dtsi	dts/stm32: add clock property to spi nodes	2018-07-05 11:16:38 -05:00
stm32f072.dtsi	dts/stm32: add clock property to spi nodes	2018-07-05 11:16:38 -05:00
stm32f091.dtsi	dts/stm32: add clock property to spi nodes	2018-07-05 11:16:38 -05:00
stm32f103Xb.dtsi	dts/stm32: add clock property to spi nodes	2018-07-05 11:16:38 -05:00
stm32f103Xe.dtsi	dts/stm32: add clock property to spi nodes	2018-07-05 11:16:38 -05:00
stm32f107.dtsi	dts: stm32f1: Add PWM nodes	2018-06-12 03:54:26 -04:00
stm32f207.dtsi	stm32f2: add stm32f207xg soc	2018-07-05 11:26:07 -05:00
stm32f303.dtsi	dts/st: add clock property to i2c nodes	2018-07-05 11:16:38 -05:00
stm32f334.dtsi	dts: stm32f3: Add PWM nodes	2018-06-12 03:54:26 -04:00
stm32f373.dtsi	dts/st: add clock property to i2c nodes	2018-07-05 11:16:38 -05:00
stm32f401.dtsi	dts/stm32: add clock property to spi nodes	2018-07-05 11:16:38 -05:00
stm32f405-pinctrl.dtsi	dts/st: dtc v1.4.6 warnings: pin-c... node has a reg ... no unit name	2018-04-24 14:46:48 -05:00
stm32f405.dtsi	dts: stm32f4: Add PWM nodes	2018-06-12 03:54:26 -04:00
stm32f407.dtsi
stm32f411.dtsi
stm32f412-pinctrl.dtsi	dts/st: dtc v1.4.6 warnings: pin-c... node has a reg ... no unit name	2018-04-24 14:46:48 -05:00
stm32f412.dtsi	dts/arm/st: Fix OTG_FS endpoint number for STM32F4 SoCs	2018-06-26 11:17:25 -05:00
stm32f413-pinctrl.dtsi	dts/st: dtc v1.4.6 warnings: pin-c... node has a reg ... no unit name	2018-04-24 14:46:48 -05:00
stm32f413.dtsi	dts/arm/st: Fix OTG_FS endpoint number for STM32F4 SoCs	2018-06-26 11:17:25 -05:00
stm32f417.dtsi
stm32f429.dtsi	dts/st: dtc v1.4.6 warnings: pin-c... node has a reg ... no unit name	2018-04-24 14:46:48 -05:00
stm32f429vX.dtsi	dts: stm32: add SPI nodes and give example for /delete-node/	2018-02-20 09:47:43 -05:00
stm32f446.dtsi	dts/arm/st: Fix OTG_FS endpoint number for STM32F4 SoCs	2018-06-26 11:17:25 -05:00
stm32f469.dtsi	dts/arm/st: Fix OTG_FS endpoint number for STM32F4 SoCs	2018-06-26 11:17:25 -05:00
stm32f723.dtsi	arch: arm: stm32: add basic support for STM32F723 SoC	2018-07-03 13:53:36 -05:00
stm32f746.dtsi	arm: stm32: STM32F7 family device tree	2018-06-28 08:29:32 -05:00
stm32f769.dtsi	arch: arm: stm32: add basic support for STM32F769 SoC	2018-07-06 09:56:25 -05:00
stm32f0-pinctrl.dtsi	boards: stm: Add CAN support for stm32f072b micro controller	2018-05-19 20:19:30 +02:00
stm32f0.dtsi	dts/arm/st: Fix SPI1 clock property on F0 series	2018-07-06 09:46:57 -05:00
stm32l4-pinctrl.dtsi	can: Add can support for STM32L432	2018-06-18 15:23:29 -04:00
stm32l4.dtsi	dts/arm/st: Fix I2C1 clock property	2018-07-06 09:46:57 -05:00
stm32l053.dtsi	dts/st: add clock property to i2c nodes	2018-07-05 11:16:38 -05:00
stm32l072.dtsi	dts/arm/st: Fix I2C3 clock property on L0 series	2018-07-06 09:46:57 -05:00
stm32l073.dtsi	dts/arm/st: Fix I2C3 clock property on L0 series	2018-07-06 09:46:57 -05:00
stm32l432.dtsi	arch: stm32l432: add support for USB controller	2018-05-24 09:42:30 -05:00
stm32l475.dtsi	dts/st: add clock property to i2c nodes	2018-07-05 11:16:38 -05:00
stm32l476.dtsi
stm32l496.dtsi	dts/st: add clock property to i2c nodes	2018-07-05 11:16:38 -05:00
stm32l0-pinctrl.dtsi	arch: arm: soc: stm32l0: add LPUART1 pinmux options	2018-05-25 11:54:42 -05:00
stm32l0.dtsi	dts/arm/st: Fix I2C1 clock property	2018-07-06 09:46:57 -05:00