imx_msg transmission size type is uint32_t:
changed imx_read and imx_write signature accordingly.
Removed also two unused variables.
Signed-off-by: Antonio Tessarolo <anthonytexdev@gmail.com>
When there is no data to send (e.g. i2c message with NULL buffer and
len=0), i2c_imx driver locks itself in isr handling forever.
So if there is no data to send, only device's address must be written
on bus. This fixes i2c_shell's scan command on both imx7 and imx6sx.
Signed-off-by: Antonio Tessarolo <anthonytexdev@gmail.com>
The mcumgr header files are now in include/mgmt/mcumgr/, so reflect this
change in the UART console implementation.
Fixes#30261.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
An address might be made for 64bit though it's lower 32 bits are made of
0. Also Simplifying the overall by removing a useless variable.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Added early return from uart_poll_out when uart device is not in
active state. Poll_out is used from many contexts by multiple users
and currently here is no mechanism in power management to disable
them (console, logger when going to inactive power state.
Additionally, moved setting new state when disactivating the device to
ensure that no poll_out will happen after disabling the UARTE.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It raises an error in case the source data width differs
from the dest data width.
The dma_stm32_width_config function is no more useful: removed.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Usage of mem_pool for all IN endpoints was removed in
commit b3c63425a0 ("usb: driver: Reduce Endpoint buffer pool.")
Remove also k_mem_pool_free for all IN endpoints.
Fixes: #30213
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit adds a new driver category for memory controller
peripherals. There is no API involved for now, as it has not been found
necessary for first implementation.
STM32 Flexible Memory Controller (FMC) is the only controller supported
for now. This peripheral allows to access multiple types of external
memories, e.g. SDRAM, NAND, NOR Flash...
The initial implementation adds support for the SDRAM controller only.
The HAL API is used, so the implementation should be portable to other
STM32 series. It has only been tested on H7 series, so for now it can
only be enabled when working on H7.
Linker facilities have also been added in order to allow applications to
easily define a variable in SDRAM.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Nothing in the API description the delayed work structure sanctions
direct reference to internal fields. Do not assume that a delayed
work item can be submitted without delay by invoking k_work_submit()
with a reference to the contained work item. Instead submit with the
delayed API and no wait.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Constifying global data allows to save lots of RAM. This improvement
allows to save 224 bytes of RAM when compiled on ARM, with default
configuration.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Constifying global data allows to save lots of RAM. Defining data inside
function as 'static const' allows on the other hand to save stack usage
and reduced code size (because data doesn't have to be copied on stack
in runtime).
This improvement allows to save 448 bytes of RAM and 88 bytes of ROM
when compiled on ARM, with default configuration.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Constifying global data allows to save lots of RAM. Defining data inside
function as 'static const' allows on the other hand to save stack usage
and reduced code size (because data doesn't have to be copied on stack
in runtime).
This improvement allows to save 640 bytes of RAM and 64 bytes of ROM
when compiled on ARM.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
modem_cmd and setup_cmd structures are used only to store static
information about commands to be sent and replies to be
received. Reference it as const, so that it is possible to define const
instances and save some RAM space by placing those definitions entirely
in ROM.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This change adds IEEE802154_RAW_MODE support for the
cc1352r.
This allows using the cc1352r 2.4 GHz radio and Sub Ghz
radio as a transceiver (PHY) instead of using L2 networking.
Signed-off-by: Erik Larson <erik@statropy.com>
Change to spi_context_lock missed one spot in the flexcomm driver and
this causes a build issue. Pass spi_cfg to spi_context_lock to fix
the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enables optionally placing Segger RTT and SystemView data in the DTCM
linker section instead of the default data section. This is needed on
SoCs in the i.MX RT series that use cacheable external SDRAM to store
data.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
currently pcie_get_mbar only returns the physical address.
This changes the function to return the size of the mbar and
the flags (IO Bar vs MEM BAR).
Signed-off-by: Maximilian Bachmann <m.bachmann@acontis.com>
This new offset value in the dma config is made to
build the table of dma mux_channels with a dmamux.
Range depends on the nb of channels for selected dma instance
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Perform FIFO flush in write failure case
Perform full PECI HW block reset if multiple consecutive
failures are observed
Remove trailing \n from logging messages
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
The SAM4L have a unique I2C driver. It shares simultaneously pins for
both master and slave controllers. Each controller have their own
instance. This introduces the TWIM controller that handles only the
master part.
The TWIM controller uses no copy and the driver was prepared to work
with both 7 and 10 bits address. The controller can handler up to 256
bytes for a single transfer allowing long data communication with
almost no CPU intervention.
The driver was wrote specifically to Zephyr. It receives a transfer
list of from upper layers to a specific device on the bus. It programs
the first and second transfer, if it exists, before start. At end of
full read/write interrupt, will program the next data block. This
process repeats until all transfers be executed. The driver uses
interrupt from TWIM to check for erros or program next tranfer.
Future work can enable low power mode on the driver allowing long
transfers with low power consumption.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
On the STM32MP1 and STM32H7 Series SoC, if slave select pin control by
software on master mode operation, the SS input/output polarity (SSIOP)
should be set to high level avoid the mode fault (MODF) error.
Signed-off-by: Harry Jiang <explora26@gmail.com>
When C2 is powered on, flash erase/write operation requires C1
to share a flash mutex with C2. This can only be done if IPM
communication is set up (SHCI).
Instead of configuring C2 (BLE controller) at on ble open,
do it at driver start up.
This allows flash operations before ble_open.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Keep locking for SPI_LOCK_ON from the first call of transceive until
spi_release release the lock. Use owner parameter to in the spi_context
to store the owner of the lock.
The locking is in line with the SPI_HOLD_ON_CS
Signed-off-by: Stefan Bigler <stefan@bigler.io>
Sometimes native_posix UART driver starts to flood the output
by printing hundreds of lines like this
np_uart_poll_out: a character could not be output
Remove the warning as it makes the output very hard to read
without giving much useful information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Configure hostname by issuing AT+CWHOSTNAME="<hostname>" command. Do it
just after setting link address, which is used to generate hostname
postfix when CONFIG_NET_HOSTNAME_UNIQUE=y.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reworks the fxos8700 sensor driver to use DT_INST_FOREACH_STATUS_OKAY.
This allows it to support multiple instances, however only a single
instance was tested with the frdm_k64f board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes the fxos8700 sensor driver to reflect recent changes in the
generic device driver structure, renaming driver_data and config_info to
data and config respectively. These instances in the fxos8700 sensor
driver were missed because we haven't enabled the magnetic vector
magnitude function in CI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts fxos8700 magnetic vector magnitude options from Kconfigs to
optional device tree properties.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts fxos8700 power mode options (normal, low noise low power, high
resolution, low power) from Kconfigs to an optional device tree
property.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts fxos8700 range options (2g, 4g, 8g mode) from Kconfigs to an
optional device tree property.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The driver was using CONFIG_SRAM_BASE_ADDRESS as the value used to
recognize whether source buffer is in RAM. This label provide the
base address of the image SRAM, and not the base of actual HW SRAM.
This patch uses nrfx_is_in_ram() instead.
fixes#29467
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The at45 and nor spi flash drivers needs flash layout to work.
Probably tested were conducted with SoC that already selects
the FLASH_HAS_PAGE_LAYOUT for internal flash drivers. This add
the missing dependency.
Fixes#28094.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This module needs to format floating point values in shell print
statements, which requires FP format support.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Introduced two per instance booleans, which get set using DT info:
1. is_lsm303agr_dev: if the device is a LSM303AGR_ACCEL, then
the scale values have to be changed.
2. Handle disconnect-sdo-sa0-pull-up if present in ntsnace DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Handle interrupts correctly for multi instance, checking per
device DT bindings instead of global Kconfig definitions.
The old interrupt behaviour has been maintained, fixing DRDY to
be on INT1 and Any Motion event on INT2.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
ZLP - zero length packet is used to indicate that the device
has no more data to send. If the Host asks for more data that the
device can provide and the data size is mutliplication of Endpoint
wMaxPacketSize then the device must terminate the data transfer
with ZLP.
Until this patch Nordic device driver controller was not aware of
the requested data length and could not determine when the ZLP was
required.
This patch introduces a fix that prevents the driver from starting
setup stage before the ZLP is being send.
For consistance with the Zephyr USB stack sending ZLP must be
issued from the stack level. Making trans_zlp flag true results
in blocking the driver from starting setup stage without required
ZLP.
After the data transfer finishes the driver will be prepared for ZLP
and will call back the stack to start writing ZLP. After the ZLP
is being send the driver will automatically start status stage and
end the Control Transfer.
This patch also removes CONFIG_USB_DEVICE_DISABLE_ZLP_EPIN_HANDLING
and aligns Nordic driver with others.
Without this patch the issue could occur when handling get requests.
Typical case is string descriptor of length equal to wMaxPacketSize.
Hosts usually asks for wLength = 255 Bytes when string descriptors
are being requested. In that case to successfully finish the data
stage of the Control transfer the device must send wMacPacketSize
Bytes of actual string descriptor and then ZLP to indicate that no
more data are present. After ZLP the status stage may start and the
request is finished successfully.
Without this patch the driver will not send ZLP making it unable
to end the Control Request successful - this may lead to failing
'Device Descriptor Test' from USB3CV test tool.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This patch adds setup packet copy in the Nordic device
controller driver (ubs_dc_nrfx.c). This patch is required
for subsequent patch that fixes isssues with ZLP handling.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
IN Endpoints does not require to have initialized internal
buffer. The data send are not copied to the internal buffer
anymore. This patch reduces memory usage for IN Endpoints.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Nordic device driver controller (usb_dc_nrfx.c) was fragmenting
IN transfers longer than wMaxPacketSize long using its
internal buffers. Buffers were reserved for each endpoint.
Because the Low level driver (nrfx) is capable of handling
fragmentation, there is no need to do it at the driver
controller level. Data pointer is used directly to create
the nrfx transfer. Endpoint buffers are not required anymore
and could be dropped.
This patch removes fragmentation of in transfers and omits
usage of internal endpoint buffers. Buffer could be later
freed by subsequent patches.
Nordic low level usbd driver is also capable of adding ZLP
if required however for consistance with the Zephyr USB device
stack ZLP must be triggered from stack level.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
An event was not handled by the clock control resulting in assert
and lack of notification about clock readiness.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The commit 5e97d779bb ("device: convert DEVICE_INIT to DEVICE_DEFINE
or SYS_DEVICE_DEFINE") did not convert the gsm_ppp.c properly. The
power management parameter was not set to NULL but was pointing to
the data pointer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit introduces the catch that prevents building of
IEEE 802.15.4 nRF driver in case the non-secure domain of the core
is used.
Signed-off-by: Czeslaw Makarski <Czeslaw.Makarski@nordicsemi.no>
Take advantage of the new pcie_alloc_irq() API so that we get a valid
IRQ on platforms where the IRQ register is not pre-populated with a
valid value up front.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the new pcie_alloc_irq() API so that we get a valid IRQ on
platforms where the IRQ registers do not contain valid values up
front.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are x86 platforms where the IRQ configuration register for PCIe
is not pre-populated and the OS needs to assign a number dynamically
by writing to the register.
In order to allocate interrupts we have to know which ones have been
hard-coded in device tree. We accomplish this by collecting these
values through the IRQ_CONNECT() macro and placing them in a dedicated
linker section (in ROM).
The full set of allocated interrupts are managed through a bitmap, and
the pre-allocated values (from the linker section) are inserted into
this upon initial runtime access.
This patch introduces a new pcie_alloc_irq() API that drivers can use
to allocate interrupt line numbers. The two in-tree drivers that were
using this API (I2C and UART) are converted to use the new API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds support for GRLIB GPTIMER general purpose timer used in
LEON3/4/5 systems.
One of the GPTIMER subtimers is used to generate periodic interrutps
for announcing ticks. Another subtimer is used as upcounter for the
cycle_get_32() service.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Adds driver support for APBUART transmitter and receiver
interrupts. Compatible with APBUART implementations without HW FIFO
interrupt, for example QEMU.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This adds support for the GRLIB APBUART UART peripheral commonly used in
LEON3/4/5 systems.
Driver features:
- Auto-detecting debug FIFO, if configured by GRMON
- Setting and getting UART transfer attributes
- Hardware FIFO if available
- Any number of APBUART devices based on devicetree
- Error status indication
- Polled operation
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This adds support for the GRLIB IRQMP interrupt controller commonly used
in LEON3/4/5 systems.
The driver supports the 15 SPARC interrupts and 16 extended interrupts.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Neither i2c_transfer in i2c.h nor i2c_mcux_transfer in i2c_mcux.c
have any sort of locking. If e.g. an i2c eprom is updated using a
shell and simultaneously another thread access a lm75 then one
of the two transfers will fail or produce a random result.
This changes addresses this issue by that all i2c_msgs of one
i2c_transfer are completed before allowing a subsequent transfer
to start.
The code has been validated on a FRDM_K64F.
Signed-off-by: Andreas Dröscher <github@anticat.ch>
Endpoint STALL should be cleared when Endpoint is enabled.
In particular when the HOST performs SetInterface requests
and Endpoints associated with that Interface are enabled
STALL should be cleared.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Clearing the PSIZE bits in the FLASH CR should not invert the mask
defined in stm32f4xx_hal_flash.h (#define CR_PSIZE_MASK 0xFFFFFCFFU)
Signed-off-by: Justin Brederveld <jmbrederveld@gmail.com>
Add a Kconfig option (enabled by default) the enables the low-frequency
oscillator (LFXO) functionality on the XL1 and XL2 pins in the nRF53
SoC initialization routine. This cannot be done in the clock control
driver, as it was done so far, because that won't work in a setup where
the application core image does not use the system clock at all.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
- Add ESP DHCP Support
- Add ESP Static IP Support including
KConfig entries for configuring IP,Gateway and netMask
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
This change enables the multi-protocol rf patch to be used for
the cc13xx_cc26xx IEEE 802.15.4 2.4 GHz PHY, which allows both
the 2.4 GHz and Sub GHz PHY to be used simultaneously.
Eventually, BLE will also work simultaneously on 2.4 GHz (with
arbitration).
Fixes#29883
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Report errors using logging subsystem so it is easier to
see the error location while debugging code.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
Make this driver multi-instance and use the new API.
Notes for sensorhub mode:
In case of multiples devices it is possible that some of them
has i2c slaves attached to it (sensorhub mode) but not the
others. Since the driver is configured in the same way for
all the instances (CONFIG_SENSORHUB=y), the routine that initialize
the sensorhub part does not fail anymore in case no slaves
are found for a particular instance. Instead, those non-sensorhub
driver instances will set the shub_inited flag to false and
will totally ignore the feature.
Notes for triggers:
In case of multiples devices the device pin the interrupt wire is
attached to can be different (INT1 or INT2 pin). So, this
information has been moved in DTS and then stored in the
specific instance config structure.
Currently the driver is able to handle a sngle interrupt line
at a time attached to either INT1 or INT2.
MOreover, the interrupt initialization for a driver instance proceed
only if the drdy has been configured in its DT, else it returns ok.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Make driver generic for multiple ILI displays. The adopted strategy is
to share all driver code except register initialization, which has been
found to have some specific registers/values depending on the
controller.
The driver has been adjusted to support multiple compatibles.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Improve the way the nrf_qspi_nor driver configures the SCK frequency,
to properly support QSPI also on nRF53 Series SoCs that use a different
base clock frequency (96 MHz).
Add also a relevant configuration in the spi_flash sample so that it
can run on the nRF5340 DK.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert handful of users of DEVICE_INIT to DEVICE_DEFINE or
SYS_DEVICE_DEFINE to allow deprecation of DEVICE_INIT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When MEC15xx boots in MAFS, ROM bootloader performs activity over
eSPI flash channel prior to FW is loaded.
Need to clear STS_DONE during early eSPI driver initialization,
before enabling interrupts to avoid unexpected ISRs in FW.
Otherwise this would cause flash_lock semaphore to be incremented
due to ROM activity and result in FW's first espi flash request
to return immediately even before eSPI bus transaction completes.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
In current implementation, for Ping command, write data/payload is
queued in FIFO infinitely eventhough Ping command have write length
of '0'.
This issue is addressed in this patch.
Signed-off-by: Diwakar C <diwakar.c@intel.com>
This change adds IEEE 802.15.4g (Sub GHz) support for the
cc1352r.
The 2.4 GHz radio and the Sub GHz radio are capable of
operating simultaneously.
Fixes#26315
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Obtaining irq_pin from dev leads to disabling interrupts
on unpredictable pin, as dev points to GPIO, not LSM6DSL.
Fixes#29721
Signed-off-by: Yurii Gubin <y.gubin@gmail.com>
For drivers that support CONFIG_DEVICE_POWER_MANAGEMENT there are some
cases that look like:
#ifdef CONFIG_DEVICE_POWER_MANAGEMENT
DEVICE_DEFINE()
#else
DEVICE_AND_API_INIT()
#endif
There is no need to special case this as the pm_control_fn argument to
DEVICE_DEFINE will just be ignored in the
!CONFIG_DEVICE_POWER_MANAGEMENT case. So we can cleanup the code a
little and remove the #else cases for the drivers that do this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Option to pause writing to the pseudo terminal until it is ready to
receive data. Useful for pseudo terminal synchronization with other
host processes.
Signed-off-by: Pavel Král <pavel.kral@omsquare.com>
When setting the MAC address, the ethernet driver has to call
net_if_set_link_addr() with the updated address. This was missing and is
added now.
See e.g.
https://github.com/zephyrproject-rtos/zephyr/pull/28874
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Replaces all existing variants of value clamping with the MIN and MAX
macros with the CLAMP macro.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
We should clear the pvm interrupts (snoop and pcie pmon lite interrupt)
at source before handling them.
This will make sure that we do not lose any interrupts that may have
been asserted to interrupt controller during the handling routine.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
So far there was 100ms timeout on allocation of RX net_pkt. This is too
little for cases when lots of data are incoming on pretty
fast (e.g. 1Mbps) UART interface and application layer does not consume
received network packets fast enough. Up to now in such cases all
incoming data was processed from UART and there was no data loss when
utilizing hardware flow control. However there was high chance that data
processed from UART could not be passed further to network stack,
because of the 100ms net_pkt allocation timeout. This happens for
example when low priority application does not have enough time to run.
Increase default RX net_pkt allocation timeout from 100ms to 5s, so
there is much more time to process network packets. Such timeout should
not harm, because only a dedicated RX thread will be suspended for that
time, resulting in suspending UART traffic if hardware flow control is
supported.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is now a hardcoded 100ms timeout on allocating new net_pkt for
received data. Move that configuration to Kconfig, so that value can be
tuned according to application needs.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is no reason to keep active stream socket when there was some data
loss. Mark such socket for closing and close it when all (so far)
received packets have been processed.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Following migration of all in-tree boards to device tree bindings
for SDMMC pins configuration, deprecate SDMMC related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for I2S pins configuration, deprecate I2S related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for USB pins configuration, deprecate USB related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for ETH pins configuration, deprecate ETH related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for ADC pins configuration, deprecate ADC related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for SPI pins configuration, deprecate SPI related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for I2C pins configuration, deprecate I2C related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for CAN pins configuration, deprecate DAC related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for serial pins configuration, deprecate CAN related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for serial pins configuration, deprecate (LP)U(S)ART related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for pwm pins configuration, deprecate PWN related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Reworks the mcux ethernet driver to use DT_INST_FOREACH_STATUS_OKAY and
eliminate a lot of duplicate code between instance 0 and instance 1.
Renames the ERR_MISC interrupt to ERR due to an issue with the
underscore in the device tree preprocessor macros.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add uart bus interface to extended esWIFI driver. This enables all
Inventek modules with IWIN AT Commands firmware.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
The WIFI_ESWIFI_NAME config would be uselful when there is no device
tree alternative. The esWIFI driver already is on device tree and the
label property exists. This remove WIFI_ESWIFI_NAME Kconfig variable
and switch to device tree equivalent.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Remove global access to structure eswifi_spi_data variable. Instead,
add a method to pass access to that structure. This allows better
control to the data bus variable.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
This is a temporary workaround for an issue in TI's RF Driver
API. A subsequent release of the SimpleLink SDK will mitigate
the need for it and it can be reverted when hal/ti receives
that update.
Fixes#29418
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change reworks the cc13xx_cc26xx IEEE 802.15.4 driver to use
the TI RF driver API that is available in modules/hal/ti.
There are a number of benefits to using TI's API including
- a stable multi-OS vendor library and API
- API compatibility with the rest of the SimpleLink SDK and SoC family
- potential multi-protocol & multi-client radio operation
(e.g. both 15.4 and BLE)
- coexistence support with other chipsets via gpio
- vetted TI RF driver resources, such as
- the radio command queue
- highly tuned / coupled RTC & RAT (RAdio Timer) API
Fixes#26312
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
In case of h/w setup with multiples device instances it is possible
that some of them wants to use triggers but not the others (no
interrupt line.
Since Kconfig configuration is the same way for all the instances
(CONFIG_LSM6DSL_TRIGGER=y), the driver behaves differently according
to how the device instance has been configured in the DT.
If irq-gpios is present, then the driver initialize the interrupt
part, else it skip irq init and returns ok, but data->gpio != NULL
xis checked in trigger_set() API.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Enable ARR preload so that period or pulse updates are taken
into account synchronously with update event
(at the end of a ongoing period)
And thus avoid undetermined intermediate pulse.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Add support for configuring Ethernet pins using DT pinctrl entries. Note
that F1 series pinctrl support is not handled as the driver does not
support F1.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Channels 4..7 are multiplexed on adc16. The NXP HAL exposes
ADC16_SetChannelMuxMode but this function is not yet included
in Zephy. The following patch adds channel-mux-b to the dts
enabling the use of the alternate channels of 16 bit adc.
Signed-off-by: Andreas Dröscher <github@anticat.ch>
1. Merged the single/multiple ring(s) APIs, now these APIs
can handle both which requires passing a ring id.
2. Updated timestamp handling to match the new timestamp
implementation in the SDK driver.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Those devices can use several I2C address in order to address more
than 256 Bytes using 8bit addressing. Also several physical component
can be used as a contiguous memory.
Signed-off-by: Guillaume Lager <guillaume.lager@gmail.com>
This patch makes the initialization of workqueue earlier
for Nordic driver. Without this change Nordic devices
will fail tests/subsys/usb/device test as it is resetting
USB and by that will try to start already started workqueue
thread. This may lead to Zephyr fatal error.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This driver supports the PWM driven LEDs. The devices are created from
the DT nodes with a compatible property matching "pwm-leds". For each
child node a LED is created and its "pwms" phandle's node is used to
retrieve the PWM configuration: channel, period and flags. If some of
this properties are missing (it is the case for some PWM controllers),
then reasonable default values are used.
This driver implements the following LED API methods:
- led_on
- led_off
- led_blink
- led_set_brightness
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
With STM32Cube updates
https://github.com/zephyrproject-rtos/hal_stm32/pull/75
'..._hal_rcc.c' and '..._hal_rcc_ex.c' are now systematically
compiled, due to more and more dependencies from HAL IP on rcc.
So USE_STM32_HAL_RCC and USE_STM32_HAL_RCC_EX becomes useless.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This provides structure for the regulator device hierarchy and a
driver for GPIO-controlled regulators along with its binding.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
At present this driver only supports SPI. Refactor it so that SPI is
just one of the options. This does not change any functionality.
Signed-off-by: Simon Glass <sjg@chromium.org>
This member holds the SPI bus pointer. Change its name to make that
more obvious and so that it can be used for an I2C bus also.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present there are three separate read functions and two write
functions. This makes it harder to provide an interface that can work
with either SPI or I2C.
Use bmi160_read() for all reads and create a new bmi160_write()
function for all writes.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this driver only supports a single instance. It sets up some
of its config in the init routine. It is better to put config in
constant data so that multiple instances can be supported and RAM space
is minimised.
Update the driver accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Currently a 'bmi160' pointer is used to point to the driver data. This
confusing, as the driver uses both data and config. Rename the variable
to 'data' like the bme280 driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
This driver uses verbose names for the config and data structures, which
makes it harder to see which one we are talking about. Shorten it, like
the bme280 driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
All net_bufs allocated to modem_cmd_handler's data->rx_buf are consumed
synchronously in ublox-sara-r4.c in the same thread. This means that
allocating them with timeout makes no sense, because timeout
will *always* be hit when there are no more buffers in net_buf_pool.
Get rid of the unnecessary timeout, as it doesn't help and just slows
down processing of incoming data, increasing possibility of data
overrun.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
All net_bufs allocated to modem_cmd_handler's data->rx_buf are consumed
synchronously in gsm_ppp.c in the same thread. This means that
allocating them with timeout makes no sense, because timeout
will *always* be hit when there are no more buffers in net_buf_pool.
Get rid of the unnecessary timeout, as it doesn't help and just slows
down processing of incoming data, increasing possibility of data
overrun.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
All net_bufs allocated to modem_cmd_handler's data->rx_buf are consumed
synchronously in esp.c in the same thread. This means that allocating
them with timeout makes no sense, because timeout will *always* be hit
when there are no more buffers in net_buf_pool.
Get rid of the unnecessary timeout, as it doesn't help and just slows
down processing of incoming data, increasing possibility of data
overrun.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far a dedicated buffer was used for data read from modem
interface. New net_bufs were allocated and filled later, which means
that data was lost when no more net_bufs were available in the pool.
Prevent data loss by allocating net_buf before attempting any read on
modem interface. Process incoming data in a loop as long as reading from
interface results in new data. Also remove dedicated buffer
(data->read_buf) and directly fill net_buf content instead. As a side
effect there are less memory copy operations and RAM usage is reduced.
Pre-allocated net_buf is now always appended to data->rx_buf. When there
was no (more) data read from interface to such net_buf, then this empty
net_buf will be on the end of data->rx_buf fragment list. Update
skipcrlf() and findcrlf() implementations to explicitly check for each
net_buf length, instead of blindly assuming them to have at least single
byte.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
cmd_handler_process() does two major things:
- reads data from modem interface and fills data->rx_buf,
- processes data in data->rx_buf.
Split implementation accordingly to two separate functions, which
improves readability (less automatic variables to follow at once) and
simplifies refactoring of each action.
No functional change was intended in this commit.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This is to make the gpio-i2c initialization occur after the GPIO pin
clock initialization.
Signed-off-by: Cassini Zhuang <cassini.zhuang@hansonggroup.com>
z_tick_get returns signed int. Adapt comparision
statement for remaining time computation.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
If CONFIG_MODEM_SIM_NUMBERS is 'n' than the data_imei field of struct
modem_context doesn't exist, so add ifdef protection for that case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allows the use of pin interrupt and callbacks for pca95xx family
GPIO expander chips with an interrupt line.
Enable config flag and define a gpio pin for the expander interrupt-
line (INT) in devicetree and the driver will accept pin interrupt
configurations for the expander gpio pins.
Level triggering is supported through emulation.
A worker is used to avoid waiting for I2C in ISR.
Example devicetree node:
gpioext0: tca9539@77 {
compatible = "nxp,pca95xx";
label = "GPIO_EXT_0";
reg = <0x77>;
interrupt-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <16>;
};
Fixes: #27561
Signed-off-by: Bent Ove Stinessen <bent@norbit.no>
This removes a semaphore unlock in init_spi function
which causes risks of competitive access
Signed-off-by: Clotilde Sattler <clotilde.sattler@stimio.fr>
Align register names with the ones found in the datasheet. It is easier
to follow datasheet if names are the same.
Some other minor enhancements have also been introduced (comments, use
BIT for bit fields...).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The initial configuration provided for the nrfx_power driver cannot
contain just default values, as that mean that DC/DC converters are
to be disabled, while those converters may be (and they actually are
by default for many boards) enabled through Kconfig.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for interrupt driven MSI-X PVM feature for Viper.
Function mask bit update is tracked with snoop interrupt
and vector mask bit update is tracked with pcie pmon lite
address range access detection interrupt.
Both the interrupts are required to enable this feature.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
drivers: pcie_ep: iproc: move msi/msix functions to a separate
file. This increases readability and modularity.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
File names such as pcie_ep_bcm_iproc.c / pcie_ep_bcm_iproc_regs.h
seem unnecessarily long, same with CONFIG symbols' names.
Let's shorten them by replacing 'bcm_iproc' with simply 'iproc'.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Listen func goes through a chain of calls to call winc1500_accept.
This is done to install the accept callback and should not block.
This fixes#28953 where winc1500 driver blocks on listen.
Signed-off-by: Nicolai Glud <nicolai.glud@prevas.dk>
There is no need to involve a work queue to control timeouts in
the uart_nrfx_uart driver. Kernel timers are sufficient for those
tasks, and the uart_nrfx_uarte driver may serve as a proof of this.
Replace then those uses of work queue with timers, for consistency
and simplicity, also to avoid potential issues with cancellation of
the delayed work queue items.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The TACH_XEC_DATA macro was not using its parameter
to retrieve the data structure.
It was working by chance so far.
Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
In #29055, GPIO registers programming order was modified in order
to avoid late glitch generation when programming pins at device
driver init.
The issue had been seen on non F1 device, but it made sense
to be applied on F1 series as well.
After test, it appears that it doesn't and initial F1 code was fine.
New code is generating glitch on I2C bus.
Revert the change for F1 series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
1, Change the allocation of DMA descriptors for the case
when multiple buffers are used for DMA transfer. This was
tested during SPI DMA transfers
2. Add support for the case when source and destination
addresses should not be incremented.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Fix incorrect return value check when converting pinctrl
format to existing pin config format
Signed-off-by: Marin Jurjevic <marin.jurjevic@hotmail.com>
The header scheme for the IPM_CAVS_IDC driver changed and this legacy
platform (which is really a very close cousin of intel_adsp/cavs_v15)
broke. Fix things up. Longer term we should unify the two.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The SoC definitions have the necessary IPC/IDC bits so there is
no need to define them separately.
Originally-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Significant rework of the Intel Audio DSP SoC/board layers. Includes
code from the following upstream commits:
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Thu Jun 25 16:34:36 2020 +0100
xtesna: adsp: use 50k ticks per sec for audio
Audio needs high resolution scheduling so schedule to nearest 20uS.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 24 13:59:01 2020 -0700
soc/xtensa/intel_adsp: Remove sof-config.h includes
This header isn't used any more, and in any case shouldn't be included
by SoC-layer Zephyr headers that need to be able to build without SOF.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Sat Jun 20 15:42:58 2020 -0700
soc/intel_adsp: Leave interrupts disabled at MP startup
This had some code that was pasted in from esp32 that was inexplicably
enabling interrupts when starting an auxiliary CPU. The original
intent was that the resulting key would be passed down to the OS, but
that's a legacy SMP mechanism and unused. What it actually did was
SET the resulting value in PS.INTLEVEL, enabling interrupts globally
before the CPU is ready to handle them.
Just remove. The system doesn't need to enable interrupts until the
entrance to the first user thread on this CPU, which will do it
automatically as part of the context switch.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 13:57:54 2020 +0300
dts: intel_cavs: Add required label
Add required label fixing build for CAVS15, 20, 25.
Fixes following errors:
...
devicetree error: 'label' is marked as required in 'properties:' in
bindings/interrupt-controller/intel,cavs-intc.yaml,
but does not appear in
...
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 15:19:56 2020 +0300
soc: cavs_v18: Remove dts_fixup and fix build
Remove unused now dts_fixup.h and fix build with the recent code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 15:12:25 2020 +0300
soc: cavs_v20: Remove dts_fixup and fix build
Remove unused now dts_fixup.h and fix build with the recent code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 14:59:23 2020 +0300
soc: cavs_v25: Remove dts_fixup fix build
Remove unused now dts_fixup and fix build with the latest code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:29:06 2020 +0300
soc: intel_adsp: Remove unused functions
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 17:53:58 2020 +0300
soc: intel_adsp: Clean up soc.h
Remove unused or duplicated definitions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 17:02:23 2020 +0300
soc: intel_adsp: De-duplicate soc.h
Move soc.h to common SOC area.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:54:19 2020 +0300
soc: intel_adsp: Remove duplicated io.h
Move duplicated io.h to common SOC area.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:39:46 2020 +0300
cmake: Correct SOC_SERIES name for byt and bdw
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:39:02 2020 +0300
soc: intel_adsp: Build bootloader only for specific SOCs
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Thu Jun 11 13:46:25 2020 +0100
boards: xtensa: adsp: add byt and bdw boards WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 10 10:01:29 2020 -0700
soc/intel_adsp: Make the HDA timer the default always
The CAVS_TIMER was originally written because the CCOUNT values are
skewed between SMP CPUs, so it's the default when SMP=y. But really
it should be the default always, the 19.2 MHz timer is plenty fast
enough to be the Zephyr cycle timer, and it's rate is synchronized
across the whole system (including the host CPU), making it a better
choice for timing-sensitive applications.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:21:43 2020 +0300
soc: cavs_v25: Enable general samples build
Enables general samples build for SOC cavs_v25.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:13:53 2020 +0300
soc: cavs_v20: Enable general samples build
Enable general sample build.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 14:35:13 2020 +0300
soc: cavs_v18: Fix build general samples
Fix building general samples for CAVS18.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 14:22:40 2020 +0300
soc: intel_adsp: Add support for other SOCs
Support other SOCs in the "ready" message to the Host.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 13:25:39 2020 +0300
soc: intel_adsp: Move adsp.c to common SOC area
Move adsp.c to common and clean makefiles.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 17:18:18 2020 +0300
boards: intel_adsp: Remove dependency on SOF
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 14:29:44 2020 +0100
soc: xtensa: cavs: build now good for cavs20 + 25
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 15:57:01 2020 +0300
soc: cavs_v15: Fix build for hello_world
Fix build for other then audio/sof targets.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:50:12 2020 +0300
sample: audio/sof: Remove old overlays
Removing old overlays used to switch logging backend.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Jun 8 15:02:01 2020 +0300
soc: intel_adsp: Correct TEXT area
Correct HEADER_SPACE and put TEXT to:
(HP_SRAM_WIN0_BASE + HP_SRAM_WIN0_SIZE + VECTOR_TBL_SIZE)
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:44:47 2020 +0300
soc: intel_adsp: Trivial syntax cleanup
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:41:07 2020 +0300
soc: intel_adsp: Fix bootloader script path
Make it possible to find linker script if build is done not inside
ZEPHYR_BASE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 12:10:17 2020 +0100
soc: xtensa: cavs20/25: fix build with new headers - WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 13:35:38 2020 +0300
soc: intel_adsp: Fix include headers
Fixes include headers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 10:38:50 2020 +0100
soc: xtensa: cav18: updated headers- WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Fri May 1 15:29:26 2020 -0700
soc/xtensa/intel_adsp: Clean up MP config logic
CONFIG_MP_NUM_CPUS is a platform value, indicating the number of CPUs
for which the Zephyr image is built. This is the value kernel and
device code should use to predicate questions like "is there more than
one CPU?"
CONFIG_SMP is an application tunable, controlling whether or not the
kernel schedules threads on CPUs other than the first one. This is
orthogonal to MP_NUM_CPUS: it's possible to build a "SMP" kernel on a
uniprocessor system or have a UP kernel on a MP system if the other
cores are used for non-thread application code.
CONFIG_SCHED_IPI_SUPPORTED is a platform flag telling an SMP kernel
whether or not it can synchronously signal other CPUs of scheduler
state changes. It should be inspected only inside the scheduler (or
other code that uses the API). This should be selected in kconfig by
soc layer code, or by a driver that implements the feature.
CONFIG_IPM_CAVS_IDC is a driver required to implement IPI on this
platform. This is what we should use as a predicate if we have
dependence on the IPM driver for a platform feature.
These were all being sort of borged together in code. Split them up
correctly, allowing the platform MP layer to be unit tested in the
absence of SMP (c.f. tests/kernel/mp), and SMP kernels with only one
CPU (which is pathlogical in practice, but also a very good unit test)
to be built.
Also removes some dead linker code for SMP-related sections that don't
exist in Zephyr.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Jun 8 16:41:55 2020 +0100
soc: xtensa: bootloader - use linker script
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Jun 8 16:26:18 2020 +0100
soc: xtensa: further fix headers - WIP
Simplify the directory structure, WIP for cavs20 and cavs25
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Jun 8 12:59:30 2020 +0300
soc: cavs_v15: Remove unneeded include
Remove include fixing build.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Jun 7 12:37:35 2020 +0100
soc:xtensa: adsp: remove sof specific code from soc headers
TODO: v1.8+
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Thu Jun 4 23:19:37 2020 -0700
intel_adsp_*/doc: fix duplicate .rst labels
Quick fix purely to make the build green again.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Thu Jun 4 22:34:40 2020 -0700
samples/audio/sof: use OVERLAY_CONFIG to import apollolake_defconfig
This reverts commit 21f16b5b1d29fca83d1b62b1b75683b5a1bc2935 that
copied it here instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 5 12:34:48 2020 +0300
soc: intel_adsp: Move soc_mp to common
Moving soc_mp to common SOC area, it still needs fixes for taking
number of cores from Zephyr Kconfig, etc.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 16:05:06 2020 +0300
soc: intel_adsp: Move memory.h from lib/
For those files from SOF referencing platform/lib/memory.h we have
include.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 15:20:09 2020 +0300
soc: intel_adsp: Rename platform.h to soc.h
Rename to prevent including it from SOF.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 11:47:55 2020 +0300
soc: intel_adsp: Move headers
Move headers to more convenient place
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 11:21:51 2020 +0300
soc: intel_adsp: More SOC cleaning
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Mon Jun 1 15:31:34 2020 -0700
samples/audio/sof: import sof/src/arch/xtensa/ apollolake_defconfig
Import modules/audio/sof/src/arch/xtensa/configs/apollolake_defconfig
into prj.conf and new boards/up_squared_adsp.conf
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 15:07:40 2020 +0100
soc:xtensa: adsp: let SOF configure the DSP for audio
Let SOF do this for the moment.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 15:06:20 2020 +0100
soc: xtensa: cavs: remove headers similar to cavs15
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 3 15:58:38 2020 +0300
soc: intel_adsp: Move ipc header to common
Remove duplicated headers from CAVS to common SOC part
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 3 13:02:09 2020 +0300
soc: cavs_v15: Remove unneeded headers
Remove also from CAVS15.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 18:34:11 2020 +0300
Remove more headers
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 14:12:09 2020 +0100
soc: xtensa: remove cavs sod headers for drivers and trace.
Duplicate cavs15 headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 14:05:12 2020 +0100
samples: move sof dai, dma and clk configs to SOF
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 17:38:45 2020 +0300
soc: intel_adsp: Remove more duplicated headers
Remove more headers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 2 15:50:03 2020 +0100
samples: sof: remove pm realted files.
Use the SOF versions.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 16:55:40 2020 +0300
WIP: Strip lib from include path
WIP, pushed for sync
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 14:44:33 2020 +0300
soc: intel_adsp: Remove more headers
Remove even more common headers
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 14:00:47 2020 +0300
soc: intel_adsp: Remove SOF headers
The headers would be used by audio/sof app directly from SOF module.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Sat May 30 11:01:26 2020 -0700
soc/intel_adsp: Alternative log reading script
This script speaks the same protocol and works with the same firmware,
but:
* Is a single file with no dependencies outside the python3 standard
library and can be run out-of-tree (i.e. with setups where the
firmware is not built on the device under test)
* Operates in "tail" mode, where it will continue polling for more
output, making it easier to watch a running process and acting more
like a conventional console device.
* Has no dependence on the diag_driver kernel module (it reads the DSP
SRAM memory directly from the BAR mapping in the PCI device)
* Is MUCH smaller than the existing tool.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 28 16:17:51 2020 +0300
Decrease HEP pool size to 192000
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:27:00 2020 +0100
soc: xtensa: cavs25: complete support for cavs25
Builds, not tested on qmeu due to missing SOF ROM (TODO)
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:24:26 2020 +0100
soc: xtensa: cavs20: complete cavs20 support
Now boots on qemu.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:22:13 2020 +0100
soc: xtensa: cavs18: complete boot support
Now boots on qemu.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:19:23 2020 +0100
soc: xtensa: cavs15: use cavs15 instead of apl as linker soc name
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:16:06 2020 +0100
TODO: samples: sof: work around missing trace symbols.
Disable local trace.
Needs trace updates finished before this can be removed.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:57:19 2020 +0100
dts: xtensa: rename apl to cavs15 DTS
This DTS is used by more than APL SOC. i.e. all CAVS15 SOCs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:52:20 2020 +0100
west: commands: sign: Add signing support for other CAVS targets
Sign for CAVS15, CAVS18, CAVS20 and CAVS25 SOCs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:50:07 2020 +0100
boards: xtensa: cavs: used Zephyr mask macro
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:49:46 2020 +0100
soc: xtensa: move code to SOF
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 26 11:40:36 2020 +0100
soc: xtensa: use SOF versions of clk
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 18:38:45 2020 +0300
soc: intel_adsp: Send FW ready for non SOF configuration
Configure windows and send FW ready when used without SOF, should be
loaded with fw_loader script.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 18:02:22 2020 +0300
soc: intel_adsp: Use SOF version of the file
Use exact copy from SOF module.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:47:27 2020 +0300
soc: intel_adsp: Clean up include headers
Remove SOF mentions from the SOC headers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:43:05 2020 +0300
soc: intel_adsp: Move SOF specific code to samples/audio/sof
Move SOF specific code to the SOF sample.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:39:42 2020 +0300
soc: intel_adsp: Use SOF module's version of mem_window.c
Use exact copy from SOF module.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:36:41 2020 +0300
soc: intel_adsp: Use exact copy from SOF module
Use SOF module verion of the clk.c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 14:03:35 2020 +0300
soc: xtensa: Add {SOC_FAMILY}/common/include path
Add ${SOC_DIR}/${ARCH}/${SOC_FAMILY}/common/include path if exist.
Fixes issues for xtensa SOCs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:18:50 2020 +0100
soc: xtensa: cavs common: fix headers for build
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:10:57 2020 +0100
soc: xtensa: adsp: add so_inthandlers.h for Intel platforms
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:08:26 2020 +0100
cmake: xtensa: select correct compiler per CAVS target.
TODO: what about XCC ?
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue May 19 14:59:26 2020 +0300
boards: up_squared_adsp: Move SOF configuration to samples
Move SOF-specific configuration to samples/audio/sof prj.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri May 15 15:29:50 2020 +0300
soc: intel_adsp: Move SOF code to modules/audio/sof
Move SOF dependent code out of SOC area.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 14 17:30:38 2020 +0300
Move task_main_start() to audio/sof sample
Start task_main_start() from main of audio/sof sample.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed May 13 15:37:20 2020 +0300
Rename up_xtreme_adsp to intel_adsp_cavs18
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Apr 27 14:12:59 2020 +0300
Add sample audio/sof for SOF initialization
Add dedicated sample where we put SOF specific initialization.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 18:49:36 2020 +0300
WIP: soc: cavs_v18: Cleanup
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 15:44:06 2020 +0300
soc: cavs_v15: Move soc init to common part
Moving SOC init to the right place.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 15:02:28 2020 +0300
soc: intel_adsp: Move common part to special dir
Moving common part to common/adsp.c
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri May 8 14:37:50 2020 +0300
boards: up_xtreme_adsp: Add initial up_xtreme_adsp board
Add initial board copying existing up_squared_adsp board and using
CAVS1.8 SOC family.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 7 15:30:51 2020 +0300
soc: intel_adsp: Generalize bootloader
Move bootloader to soc/xtensa/intel_adsp making it available for other
boards.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 5 21:31:00 2020 +0100
boards: xtensa: up_squared: Add support for all CAVS
Add boot support for all CAVS versions. TODO: needs to be made common
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 5 21:25:34 2020 +0100
soc: xtensa: intel_adsp: Manage cache for DMA descriptors
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 4 21:10:50 2020 +0100
soc: xtensa: adsp: use 24M567 clock
Use audio clock
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 4 10:04:01 2020 +0100
xtensa: soc: adsp: enable system agent
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 15:03:07 2020 +0100
soc: xtensa: intel_adsp: increase mem pool to 192k
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 15:02:31 2020 +0100
soc: xtensa: intel_adsp: re-enable DMA trace
Buffer will be empty (as trace items sent to Zephyr LOG) but
logic is running.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 11:18:55 2020 +0100
soc: xtensa: intel: dont use uncache region yet.
Some code was still using this region. Use later.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 10:07:28 2020 +0100
soc: xtensa: intel_adsp: fix notifier init
Topology now loads.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 21:18:38 2020 +0100
boards: up2: Need to use sof config for bootloader
This will need uncoupled at some point. For testing today.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 21:16:38 2020 +0100
boards: up2: increase heap to 128k
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Apr 30 11:35:19 2020 +0300
boards: up_squared_adsp: Use bigger HEAP
Use HEAP from old demo.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 16:06:32 2020 +0100
soc: xtensa: intel_adsp: Fix config.h naming collisions
Rename sof version to sof-config.h
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Apr 30 11:22:42 2020 +0300
Small cleanups
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 29 22:00:44 2020 +0300
tests: sof/audio: Test ll scheduler
Add more tests for scheduler.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 29 18:38:35 2020 +0300
tests: Add first schedule test
Add initial test for testing scheduling.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 29 13:36:23 2020 +0100
soc: xtensa: rmeove build warnings
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 18:04:33 2020 +0300
soc/intel_adsp: Register sof logging
Register sof logging for tracing
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 14:16:55 2020 +0300
boards: up_squared_adsp: Define HEAP_MEM_POOL_SIZE
Define HEAP_MEM_POOL_SIZE when SOF enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 10:09:20 2020 +0300
tests: audio/sof: Add interrupt API for testing
Add initial interrupt API for testing.
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 27 15:54:28 2020 +0100
soc: xtensa: adsp: Update linker script for SOF sections.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 27 11:20:01 2020 +0100
soc: xtensa: adsp: send SOF FW metadata as boot message
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Apr 26 21:47:20 2020 +0100
soc: xtensa: adsp: re-enable all SOF IP init.
Do all SOF IP init.
TODO: ATOMCTL, WFI on LX6
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sat Apr 25 15:30:40 2020 +0100
soc: xtensa: irq: Make sure IPC IRQ is registered.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 20:56:09 2020 +0300
tests: sof: Enable console
Enable console for the test.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 17:57:22 2020 +0300
soc: cavs_v15: Fix XTENSA_KERNEL_CPU_PTR_SR
Use correct value for XTENSA_KERNEL_CPU_PTR_SR.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 14:48:31 2020 +0300
tests: audio/sof: Add tests for alloc API testing
Add initial tests for allocation API testing. Can be extended for
other later.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 21 17:49:32 2020 +0300
logging: Enable xtensa simulator backend for ADSP
Enable xtensa simulator backend for SOC_FAMILY_INTEL_ADSP.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 20:58:30 2020 +0100
soc: xtensa: add common cpu logic
Support for additional cores.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 21 10:11:07 2020 +0300
Update west.yaml to point to the latest repo
Update west.yaml
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:17:01 2020 +0100
soc: xtensa: cavs: Fix build for clk.c on cavs18+
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:05:31 2020 +0100
soc: xtensa: cavs15: removed unused headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:05:09 2020 +0100
soc: xtensa: cavs25: align with SOF headers
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:03:52 2020 +0100
soc: xtensa: cavs20: align with SOF headers
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:03:09 2020 +0100
soc: xtensa: cavs18: Align with SOF headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 11:42:39 2020 +0100
west: sof: Updated to latest version.
Now builds, links and runs SOF code (but not to FW ready).
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Apr 19 13:28:53 2020 +0100
xtensa: intel adsp: build in SOF symbols if CONFIG_SOF
Code now fully links against SOF. Needs to be run tested.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Wed Apr 15 10:19:28 2020 -0700
DO NOT MERGE: temporarily add thesoftproject as remote for sof module
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Wed Apr 15 10:33:40 2020 -0700
ipm: cavs_idc: use the IPC/IDC definitions in SoC
The SoC definitions have the necessary IPC/IDC bits so there is
no need to define them separately.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 14:30:20 2020 +0100
TODO: config: Use static config for SOF module.
TODO: needs to be generated as part of SOF kconfig
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri Apr 10 21:56:07 2020 +0100
HACK: Add SOF into build
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:55:15 2020 +0100
west: modules: Add SOF audio module.
Add support for building SOF as a Zephyr module. This is the starting
point for add SOF audio into Zephyr. Currently builds but does not use
any symbols yet.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:48:48 2020 +0100
WIP soc: adsp-cavs15: Use same include directory structure as SOF
Use the same directory structure as SOF to simplify porting and allow
SOF to build without Zephyr until porting work is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:43:44 2020 +0100
WIP soc: adsp-common: Use same include directory structure as SOF
Use the same directory structure as SOF to simplify porting and allow
SOF to build without Zephyr until porting work is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:36:32 2020 +0000
WIP: soc: adsp-common: cache is common across all Intel ADSP platforms
De-duplicate soc.h cache definitions.
TODO: this needs done for other common functions.
TODO: need to fix include path
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:07:43 2020 -0700
WIP: soc: cavs25: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:07:12 2020 -0700
WIP: soc: cavs20: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:06:40 2020 -0700
WIP: soc: cavs18: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 12:37:17 2020 -0700
soc: intel_adsp: use main_entry.S in common for cavs_v15
The files are identical anyway.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 11:38:14 2020 -0700
soc: intel_adsp/cavs_v15: link common code
Let cavs_v15 link against the code compiled under common/.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 13:08:28 2020 +0000
WIP: soc: common: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:37:32 2020 +0000
WIP soc: adsp-cavs15: build power down support
Build the power down support for CAVS1.5
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 12:40:17 2020 +0000
WIP: soc: cavs15: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:30:08 2020 +0000
soc: cavs15: Add missing SHIM registers.
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 9 15:43:01 2020 +0000
xtensa: intel_adsp/cavs_v15: fix usage of LP SRAM power gating
Remove LSPGCTL as it can cause confusion, use SHIM_LSPGCTL instead.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Feb 26 15:28:48 2020 +0000
boards: up_squared_adsp: Use local xtensa HAL instead of SDK HAL
SDK HAL is deprecated for Intel ADSP SoCs so fix and use local HAL
module.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 10:45:15 2020 -0700
soc: add Intel Audio DSP SoC family
This creates a SoC family for the audio DSPs on various
Intel CPUs. The intel_apl_adsp is being moved into
this family as well, since it is part of the CAVS v1.5
series of DSPs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 11:29:02 2020 -0700
soc: xtensa: add CMakeLists.txt
Add CMakeLists.txt under soc/xtensa so that CMakeLists.txt
inside each SoC directory will be included, similar to
what ARM and RISCV have.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:43 2020 -0700
Revert "boards: up_squared_adsp: Add flasher script"
This reverts commit 80f295a9dd.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:32 2020 -0700
Revert "boards: up_squared_adsp: Update logtool tool"
This reverts commit 7770d182c1.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:23 2020 -0700
Revert "soc: intel_adsp: Generalize bootloader"
This reverts commit d6a33ef467.
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
soc: xtensa; intel: remove sof-config.h - SQUASH
No longer used.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The HDA wall clock timer is a 64 bit timer with 64 bit compare
registers, but it's being used from a 32 bit CPU. Writing the
comparator piecewise with a 64 bit C assignment will write the low
dword first, opening the possibility that the hardware will see time
go "backwards" and trigger an interrupt incorrectly.
Disable the enable bit while setting the comparator.
Found by inspection. In practice this will be very rare, and spurious
timer interrupts are supposed to be benign anyway (though they can
result in timeout expirations being misaligned to ticks, which might
be surprising to applications). Best to get it right.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If other threads are accessing the modem concurrently during gsm_ppp
initialization, they can easily corrupt UART comms. Normally this is not
noticable since those services are usually started only after modem
setup has been completed. But with the new gsm_ppp stop/start
functionality, the need of synchronizing concurrent access in a
structured way has arisen.
This commit ensures modem_cmd_handler is locked when concurrent access
to the modem UART would interfere with the driver, or otherwise cause
problems. Since the semaphore is not available during this period, all
essential calls to modem_cmd_send has been replaced with the non-locking
equivalents.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
A semaphore is used by modem_cmd_handler to protect against concurrent
UART access. This is only used for the duration of sending a command,
but there are cases when one wants to prevent UART access for other
reasons, such as when powering off the modem.
This commit exposes functionality for hogging this semaphore without
having to send a command. Furthermore, a non-locking equivalent for
modem_cmd_handler_setup_cmds is added which was previously missing.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
The parameters of the associated PWM timer were not being picked up
properly, as it was assumed that parent index is the same as the child
index. This is not necessarily true if other timer nodes are active and
not being used for PWM.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
CAN remaps were guarded by CMSIS defines which are always defined
for a given SoC.
Though under this control, we're using DT_ macros that expect
a certain node to be available, which otherwise leads to cmopilation
issue.
Align CAN node remap code on other peripherals code and check for
node availability.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Set stm32_dt_pinctrl_configure function as the unique entry point
to STM32 DT pinctrl management.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move pinctrl remap functions out of stm32f1 definition in order
to get it available to all series.
Allows use of more IS_ENABLED macros in calling drivers and make
code more readable.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add power-gpios device-tree binding property to power on module before
communicating with it. This pin is called CHIP_PU in case of ESP32{,-S2}
and CHIP_EN in case of ESP8266. Dedicated reset pin is available only on
the latter, however Espressif recommends (in ESP8266 Hardware Design
Guidelines) to use CHIP_EN instead. Follow those recommendations and use
power-gpios to reset chip if that is provided over device-tree.
Configure power-gpios and reset-gpios as inactive by default, so that
chip becomes ready after executing esp_reset() function, either if one
or both are provided over device-tree.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Most DT bindings use reset-gpios name when there is a pin to reset whole
chip. Rename wifi-reset-gpios to reset-gpios to be more consistent
between various drivers. Additionally this prevents confusion, as
somebody might think that this pin resets only WiFi, which is not true.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Remove two operation flags in the SPI configuration
instance, which disturb software controlled chip select
lines (CS never gets released).
Signed-off-by: Marco Peter <marco@peter-net.ch>
Application might need to know the GSM modem device name so
provide it in the header file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When PPP is muxed, using uart_poll_out resulted in each byte getting
wrapped in a muxing header. This led to UART bombardment which
can quickly cause some modems to hang and panic. This was observed
regularly using a SIMCOM7600E modem.
A perfect fix would involve rewriting ppp.c, uart_mux.c and
modem_iface_uart.c to all use another UART API, but that would be more
invasive by several orders of magnitude than this one, which utilizes
the fact that the uart_mux implementation of uart_fifo_fill does NOT
require ISR context. Since the Zephyr UART API states that the behavior
of uart_fifo_fill outside of ISR context is implementation defined, this
should be kosher.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
These changes enable applications to restart the networking stack which
was previously not possible without rebooting the device. This was a
major show-stopper because it made power management impossible, and
furthermore made it impossible to recover from a bad modem state without
rebooting.
This has been verified to work on a SIMCOM7600E modem, both with and
without CONFIG_GSM_MUX enabled.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
The char pointer that is logged could get scoped out and so should be
strduped before logging.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Thread implements couple of counters that require notification of failed
frame reception.
Implemented RX failed notification.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Attempting to initialize PPP without first ensuring we're attached to
the network packet service will sometimes lead to "NO CARRIER" errors
when we initialize PPP with the modem. This has been observed
reproducibly on some SIMCOM7600E modems.
This commit holds off on PPP initialization until modem has reported
that it is indeed attached by using the "AT+CGATT?" command (see 3GPP TS
27.007)
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
The only user of the I2C instances is the esp32 driver. Move the
Kconfig symbols down to the esp32 Kconfig for the instances it needs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A GPIO's parallel output bit in the parallel output
registers is read-only until the AOD bit is set to 1
in the pin's control registers. The proper sequence to
preset the state of an output pin is:
Configure pin as input with AOD=1 in the control register
Set pin state in the parallel output register
Set direction to output in the pin's control register.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
