- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Such interrupt remapping controller may be found along with Intel VT-D
hardware. Its base-address is via ACPI, and it enables up to 64K
interrupt indexes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And implement the support for intel64 which is basically the
architecture that will require it for now.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is part of Intel VT-D and how to discover capabilities, base
addresses and so on in order to start taking advantage from it.
There is a lot to get from there, but currently we are interested only
by getting the remapping hardware base address. And more specifically
for interrupt remapping usage.
There might be more than one of such hardware so the exposed function is
made to retrieve all of them.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ARM64 is currently using SP_ELx as stack pointer for kernel and threads
because everything is running in EL1. If support for EL0 is required, it
is necessary to switch to use SP_EL0 instead, that is the only stack
pointer that can be accessed at all exception levels by threads.
While it is not required to keep using SP_EL0 also during the
exceptions, the current code implementation makes it easier to use the
same stack pointer as the one used by threads also during the
exceptions.
This patch moves the code from using SP_ELx to SP_EL0 and fill in the
missing entries in the vector table.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This commit adds a new driver category for memory controller
peripherals. There is no API involved for now, as it has not been found
necessary for first implementation.
STM32 Flexible Memory Controller (FMC) is the only controller supported
for now. This peripheral allows to access multiple types of external
memories, e.g. SDRAM, NAND, NOR Flash...
The initial implementation adds support for the SDRAM controller only.
The HAL API is used, so the implementation should be portable to other
STM32 series. It has only been tested on H7 series, so for now it can
only be enabled when working on H7.
Linker facilities have also been added in order to allow applications to
easily define a variable in SDRAM.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
In the linker script SMEM_PARTITION_ALIGN is being redefined to be the
same as MMU_ALIGN. The problem is that SMEM_PARTITION_ALIGN __must__
take a parameter in input because this is being used by the
scripts/gen_app_partitions.py script passing a parameter as input.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The init_stack_frame is the same as the the ESF. No need to have two
separate structs. Consolidate everything into one single struct and make
register entries explicit.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Use GEN_OFFSET_SYM macro to genarate absolute symbols for the
_callee_saved struct and use these new symbols in the assembly code.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Make the printing of errors a bit more descriptive and print the FAR_ELn
register only when strictly required.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
There are x86 platforms where the IRQ configuration register for PCIe
is not pre-populated and the OS needs to assign a number dynamically
by writing to the register.
In order to allocate interrupts we have to know which ones have been
hard-coded in device tree. We accomplish this by collecting these
values through the IRQ_CONNECT() macro and placing them in a dedicated
linker section (in ROM).
The full set of allocated interrupts are managed through a bitmap, and
the pre-allocated values (from the linker section) are inserted into
this upon initial runtime access.
This patch introduces a new pcie_alloc_irq() API that drivers can use
to allocate interrupt line numbers. The two in-tree drivers that were
using this API (I2C and UART) are converted to use the new API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch. Register g7 is
used to point to the thread data. Thread data is accessed with negative
offsets from g7.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
SPARC is an open and royalty free processor architecture.
This commit provides SPARC architecture support to Zephyr. It is
compatible with the SPARC V8 specification and the SPARC ABI and is
independent of processor implementation.
Functionality specific to SPRAC processor implementations should
go in soc/sparc. One example is the LEON3 SOC which is part of this
patch set.
The architecture port is fully SPARC ABI compatible, including trap
handlers and interrupt context.
Number of implemented register windows can be configured.
Some SPARC V8 processors borrow the CASA (compare-and-swap) atomic
instructions from SPARC V9. An option has been defined in the
architecture port to forward the corresponding code-generation option
to the compiler.
Stack size related config options have been defined in sparc/Kconfig
to match the SPARC ABI.
Co-authored-by: Nikolaus Huber <nikolaus.huber.melk@gmail.com>
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The Inter-core Debug Unit provides additional debug assist features in
multi-core scenarios.This commit allows ARConnect to conditionally
halt cores during debugging.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
- Move kobject list after .bss
The previous order shift kernel object address defined in prebuild
file (which is use as reference in running time). So it was impossible
for zephyr to check if a kernel object address was granted because
address changed during build.
- Add support for memory shared.
- Move sdata2 section in ROM because it contains constants.
Signed-off-by: Nicolas Royer <nroyer@baylibre.com>
The IRQ handler has had a major changes to manage syscall, reschedule
and interrupt from user thread and stack guard.
Add userspace support:
- Use a global variable to know if the current execution is user or
machine. The location of this variable is read only for all user
thread and read/write for kernel thread.
- Memory shared is supported.
- Use dynamic allocation to optimize PMP slot usage. If the area size
is a power of 2, only one PMP slot is used, else 2 are used.
Add stack guard support:
- Use MPRV bit to force PMP rules to machine mode execution.
- IRQ stack have a locked stack guard to avoid re-write PMP
configuration registers for each interruption and then win some
cycle.
- The IRQ stack is used as "temporary" stack at the beginning of IRQ
handler to save current ESF. That avoid to trigger write fault on
thread stack during store ESF which that call IRQ handler to
infinity.
- A stack guard is also setup for privileged stack of a user thread.
Thread:
- A PMP setup is specific to each thread. PMP setup are saved in each
thread structure to improve reschedule performance.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Nicolas Royer <nroyer@baylibre.com>
- Set some helper function to write/clear/print PMP config registers.
- Add support for different PMP slot size function to core/board.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
We provide an option for low-memory systems to use a single set
of page tables for all threads. This is only supported if
KPTI and SMP are disabled. This configuration saves a considerable
amount of RAM, especially if multiple memory domains are used,
at a cost of context switching overhead.
Some caching techniques are used to reduce the amount of context
switch updates; the page tables aren't updated if switching to
a supervisor thread, and the page table configuration of the last
user thread switched in is cached.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't need this for stacks any more and only use this
for pre-calculating the boot page tables size. Move to C
code, this doesn't need to be in headers anywhere.
Names adjusted for conciseness.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- z_x86_userspace_enter() for both 32-bit and 64-bit now
call into C code to clear the stack buffer and set the
US bits in the page tables for the memory range.
- Page tables are now associated with memory domains,
instead of having separate page tables per thread.
A spinlock protects write access to these page tables,
and read/write access to the list of active page
tables.
- arch_mem_domain_init() implemented, allocating and
copying page tables from the boot page tables.
- struct arch_mem_domain defined for x86. It has
a page table link and also a list node for iterating
over them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The current MMU code is assuming that both kernel and threads are both
running in EL1, not supporting EL0. Extend the support to EL0 by adding
the missing attribute to mirror the access / execute permissions to EL0.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Implement the functionality for configuring the
architecture core registers to their warm reset
values upon system initialization. We enable the
support of the feature in the Cortex-M architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is redundant and not coherent with the rest of the file. Thus
remove the _BIT suffix from the bit field names.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The errno_var copy in Xtensa's struct is not being used at all
for errno (as there is already one in struct k_thread).
So remove it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Note that since Cortex-M does not have the thread ID or
process ID register needed to store TLS pointer at runtime
for toolchain to access thread data, a global variable is
used instead.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Implement the kernel "coherence" API on top of the linker
cached/uncached mapping work.
Add Xtensa handling for the stack coherence API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Instead of having some special stack frame when first scheduling new
thread and a new thread entry wrapper to pull out the needed data, we
can reuse the context restore code by adapting the initial stack frame.
This reduces the lines of code and simplify the code at the expense of a
slightly bigger initial stack frame.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
MWDT toolchain has Stackcheck_alloca option enabled by default.
So it adds stack checking in addition to Zephyr's stack checking.
As it is completely redundant let's drop it.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Previously MPU registers macros are only defined within its own header
files and could not be used by other part of program. This commit unify
them together.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Both operands of an operator in the arithmetic conversions
performed shall have the same essential type category.
Changes are related to converting the integer constants to the
unsigned integer constants
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
No need to mix super short version of names with other structures
having full name. Let's follow a more relevant naming where each and
every attribute name is self-documenting then. (such as s/id/apic_id
etc...)
Also make CONFIG_ACPI usable through IS_ENABLED by enclosing exposed
functions with ifdef CONFIG_ACPI.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- x0/x1 register printing is reversed
- The error stack frame struct (z_arch_esf_t) had the SPSR and ELR in
the wrong position, inconsistent with the order these regs are pushed
to the stack in z_arm64_svc. This caused all register printing to be
skewed by two.
- Verified by writing known values (abcd0000 -> abcd000f) to x0 - x15
and then forcing a data abort.
Signed-off-by: Luke Starrett <luke.starrett@gmail.com>
We need the same logic for each SOC, instead of copypasting
things just put this in a common file. This approach still
leaves the door open for custom memory layouts if desired.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
