Implementation of Advertising Set Terminated Event on
duration sans use of additional variable in advertising
set context structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This whole code block is ifdef'ed around
CONFIG_NEWLIB_LIBC_ALIGNED_HEAP_SIZE being NOT defined,
remove as this can never be true.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We've come a long way since this was written to implement
generic ram bounds definitions and MPU capabilities,
use them here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* Rename DT_SRAM_SIZE to DT_DRAM_SIZE since that is more correct
* Remove mmio-sram compatible since that is not correct for DRAM.
* Rename node label from sram0 to dram0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I can never remember what the contents of the kconfigfunctions dict is
and have to look it up every time. I suspect I'm not alone, and not
everyone who uses these will know how to look up the answer. Add a
comment explaining the value.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
There is already a way to check if a node is enabled based on its node
label, but we don't have an equivalent way to do that for a path or an
alias. Add them. These rely on the same underlying edtlib machinery to
get their jobs done, but are being treated differently within Kconfig
in order to match distinctions between paths and aliases made in the
devicetree.h API.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This adds CONFIG_BT_CONN_DISABLE_SECURITY which can be used to disable
security checks for incoming requests enabling to test accessing GATT
attributes and L2CAP channels that would otherwise require
encryption/authentication in order to be accessed.
It depends on BT_TESTING to indicate to the users that this is a
testing feature which shall not be used in production.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It should be possible to identify whether advertising set uses legacy
or extended advertising to avoid performing operations that are not
supported on either of them.
For example, scannable advertising can have advertising data set only
if legacy PDUs are used.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
serial-pty is an extension that is not supported in the hardware map, so
we need to work around the fact that it is not part of the map when
dealing with normal serial.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sort the MISRA lists in a more natural ascending numeric order.
So instead of 1.1 - 1.10 - 1.11 - 1.2 - 1.3, we now have
1.1 - 1.2 - 1.3 - 1.10 - 1.11.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
To allow hardware crypto acceleration custom mbedtls library needs to be
prepared. However current implementation forces the default library to
be used.
This patch allows not using the default library and passing custom
mbedtls target to use with openthread.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Missing close of socket may cause resource leak, in form of orphaned
socket descriptor, when bind fails.
Coverity CID: 210072
Fixes#26991
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
add netif:eth to supported devices
change ram size to 288 as it the size of
sram0 in h745 SoC
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
bringing model and compatible descriptors
to same style as in case of M7 core
enable UART8 for Cortex-M4 in it's dts
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
The EEPROM device doesn't mutate the source data it's given, so update
the API signature to reflect this fact.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The NET_IF_OFFLOAD_INIT() macro was not converted to use
Z_STRUCT_SECTION_ITERABLE() macros in commit 62580748e5
("net: Use section foreach macros"). This meant that for those boards
that use offloaded network stack, the network interface was not created
and network connectivity was lost.
Fixes#27037
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP2 stack does operations directly on the packet data which may
or may not be aligned. The unaligned access causes a fault on the
Cortex-M0+ so use the UNALIGNED_* macros instead.
Signed-off-by: Michael Hope <mlhx@google.com>
It can happen that the command '>' is received between
modem_cmd_send_nolock and modem_cmd_handler_update_cmds. Since the
command handler for '>' is not set, sem_tx_ready will not be given
and _sock_send will timeout. Make sure the command handlers are set
before the send by also passing them to modem_cmd_send_nolock.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
This adds a new config option for SAM0 targets that use the BOSSA
bootloader. If the CDC ACM driver is also enabled, then the
programmer can automatically reset the board into the bootloader for
programming.
Signed-off-by: Michael Hope <mlhx@google.com>
This is called when the USB host changes the virtual baud rate.
This is used by Arduino style boards to signal that the board should
reset into the bootloader.
Signed-off-by: Michael Hope <mlhx@google.com>
Rule 18.6 has the examples split in two files. This PR adds
the correct reference to the example files in the gitlab
repository
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Race conditions exist when remapping the NXP MPU. When writing the
start, end, or attribute registers of a MPU descriptor, the hardware
will automatically clear the region's valid bit. If that region gets
accessed before the code is able to set the valid bit, the core will
fault.
Issue #20595 revealled this problem with the code in region_init()
when the compiler options are set to no optimizations. The code
generated by the compiler put local variables on the stack and then
read those stack based variables when writing the MPU descriptor
registers. If that region mapped the stack a memory fault would occur.
Higher compiler optimizations would store these local variables in
CPU registers which avoided the memory access when programming the
MPU descriptor.
Because the NXP MPU uses a logic OR operation of the MPU descriptors,
the fix uses the last descriptor in the MPU hardware to remap all of
dynamic memory for access instead of the first of the dynamic memory
descriptors as was occuring before. This allows reprogramming of the
primary discriptor blocks without having a memory fault. After all
the dynamic memory blocks are mapped, the unused blocks will have
their valid bits cleared including this temporary one, if it wasn't
alread changed during the mapping of the current set.
Fixes#20595
Signed-off-by: David Leach <david.leach@nxp.com>
Putting data to local buffer before transmission was removed
to optimize operation. Local buffering was not needed, as passed
buffer cannot be modified until sending is finished.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
There may be value in being able to rename a subtree, but there is no
identified need to be able modify the text of an assigned subtree
name.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
1.Add some comments to describe functions performance
2.add a new testcase to implement push can be waited
when there are no items available.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Add option to provide to sanitycheck argument for creating
pseudoterminal. Used with hardware without serial console connected.
A pseudoterminal is used to make a sanitycheck believe that it
interacts with a terminal although it actually interacts with the
script.
E.g "sanitycheck --device-testing --device-serial-pty <script>"
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for the NXP KE1xF SoC to the eDMA driver. The KE1xF supports
m2m DMA transfers from sources 60 to 63.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
KConfig.defconfig: enabled NETWORKING support
pinmux.c: added ethernet pins definition for this board
m7 yaml file becomes netif:eth support enabled
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
add DTCM caching management in KConfig for stm32h7
add NOCACHE_MEMORY support for stm32h7 M7 CPU series
add HAL_RCC_EX support for stm32h7 series
implemented stm32h7 support within stm32 eth driver
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
added changes that apply to other than stm32h7 series
and prepares stm32h7 series integration:
eth_tx/eth_rx: changed type of total_len
added necessary defines for
tx_desc and own flag extractions
added read_eth_phy_register() function
and corresponding defines
added ETH_DMA_MEM and CACHE defines
following memory buffers declarations moved out of
its ifdef preprocessor macro:
dma_rx_desc_tab, dma_tx_desc_tab,
dma_rx_buffer, dma_tx_buffer
added hal_ret stm32 HAL status checks
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
