Swap this out and make the status a parameter.
Leave a couple of cases of DT_NODE_HAS_COMPAT().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit renames the x86 Kconfig `CONFIG_{EAGER,LAZY}_FP_SHARING`
symbol to `CONFIG_{EAGER,LAZY}_FPU_SHARING`, in order to align with the
recent `CONFIG_FP_SHARING` to `CONFIG_FPU_SHARING` renaming.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
ARC_MPU_VER 2 has a strong requirement in
* size, must be >= 2048 bytes and power of 2
* start address must be aligned to size
It may bring a big waste of memory.
On the other hand, GEN_PRIV_STACK is used for ARC_MPU_VER 2,
it conflicts with MPU_STACK_GUARD.
So considering the limmitations, remove MPU_STACK_GUARD for
ARC_MPU_VER 2
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Because ARC MPUv3 doesn't have a strong alignment requirement
as ARC MPUv2 does, no use of GEN_PRIV_STACK for it.
Without GEN_PRIV_STACK, all stack elements can be in one stack object.
See #24048.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
drop the original C macro based allocation of privilged stack as
it may cause the waste of memory for ARC MPUv2.
now use the way of GEN_PRIV_STACK to generate privilege stack as
other archs did, e.g. ARM.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The riscv linker scripts utilize DT_FLASH_BASE_ADDRESS and
DT_FLASH_SIZE, as we want to phase out the old generator we need to
replace these defines with macros from devicetree.h.
We support two flash configurations at this point, either a QSPI flash
like on the hifive board or a SoC flash like on the rv32m1_vega. We
update the linker scripts to check the compat of the zephyr,flash node
and based on if its 'jedec,spi-nor' or 'soc-nv-flash' we determine how
to extract the "flash" base address and size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
fix bss section be copy to binary.
When compiling with non-xip.
All sections will be placed in the ram.
If NOBITS section isn't placed at the end of ram,
objcopy will placed these section to binary file.
The modify only for no-userspace.
In userspace the section will be adjust,
kobject_data size increase,
the bss be shifted, the content of kobject_data
will no mactch to kernel obj of bss.
Signed-off-by: Frank Li <lgl88911@163.com>
Convert linker scripts and arc_mpu_regions.c setup to use new
devicetree.h macros to extract the base address and size of the various
memory regions (DDR, SRAM, FLASH, DCCM, ICCM). We also remove the
scaling up and down since DT_REG_SIZE() returns the value in bytes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit cleans up the section name definitions in the linker
sections header file (`include/linker/sections.h`) to have the uniform
format of `_(SECTION)_SECTION_NAME`.
In addition, the scope of the short section reference aliases (e.g.
`TEXT`, `DATA`, `BSS`) are now limited to the ASM code, as they are
currently used (and intended to be used) only by the ASM code to
specify the target section for functions and variables, and these short
names can cause name conflicts with the symbols used in the C code.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Rework x86 linker scripts to use DT_REG_ADDR/DT_REG_SIZE on
DT_CHOSEN(zephyr_sram) and DT_CHOSEN(zephyr_flash). As part of this
we remove the dts_fixup.h. Using DT_REG_SIZE means we don't have to
adjust the sizes by 1024.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace DT_PHYS_RAM_ADDR and DT_RAM_SIZE with DT_REG_ADDR/DT_REG_SIZE
for the DT_CHOSEN(zephyr_sram) node.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add __DSB system wide berrier.
Move the barrier macros to inline function header.
TODO: add more granular oneway barriers.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Convert various DT_CCM_* macros to use DT_CHOSEN(zephyr_ccm) and
associated macros from devicetree.h.
We remove CCM references from cortex_a and cortex_r linker scripts as
its only a feature on Cortex-M STM32 SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert various DT_DTCM_* macros to use DT_CHOSEN(zephyr_dtcm) and
associated macros from devicetree.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This change adds full shared floating point support for the RISCV
architecture with minimal impact on threads with floating point
support not enabled.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
Replace DT_CPU_CLOCK_FREQUENCY with a PATH based reference to cpu@0
(DT_PATH(cpus, cpu_0)) and than getting the clock_frequency property:
DT_CPU_CLOCK_FREQUENCY -> DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
This lets us remove DT_CPU_CLOCK_FREQUENCY from dts_fixup.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This operation is formally defined as rounding down a potential
stack pointer value to meet CPU and ABI requirments.
This was previously defined ad-hoc as STACK_ROUND_DOWN().
A new architecture constant ARCH_STACK_PTR_ALIGN is added.
Z_STACK_PTR_ALIGN() is defined in terms of it. This used to
be inconsistently specified as STACK_ALIGN or STACK_PTR_ALIGN;
in the latter case, STACK_ALIGN meant something else, typically
a required alignment for the base of a stack buffer.
STACK_ROUND_UP() only used in practice by Risc-V, delete
elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit reworks the ARM AArch32 non-Cortex-M (i.e. Cortex-A and
Cortex-R) exception handling to establish the base exception handling
framework and support detailed exception information reporting.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds an "extension" header for the CMSIS to provide the
core register access functions and macros that are not currently
available in the CMSIS.
The functions and macros defined in this header should be eventually
added to the upstream CMSIS and, once added, removed in this header.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Zephyr being an OS is typically expected to run at EL1. Arm core
can reset to EL3 which typically requires a firmware to run at EL3
and drop control to lower EL. In that case EL3 init is done by the
firmware allowing the lower EL software to have necessary control.
If Zephyr is entered at EL3 and it is desired to run at EL1, which
is indicated by 'CONFIG_SWITCH_TO_EL1', then Zephyr is responsible
for doing required EL3 initializations to allow lower EL necessary
control.
The entry sequence is modified to have control flow under single
'switch_el'.
Provisions added by giving weak funcions to do platform specific
init from EL3.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
The return value of the interrupt is never used, so remove the
functionality from the API. We ripple this change into the
ARCH_IRQ_CONNECT and ARCH_IRQ_DIRECT_CONNECT implementations. With
this change we can also remove the compound expression as that is
not needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To remove the need to have DT_NUM_IRQ_PRIO_BITS defined in every
dts_fixup.h we can just handle the few variant cases in irq.h. This
allows us to remove DT_NUM_MPU_REGIONS from all the dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* add interrupt lock in low level API to gurantee the
correctness of operations.
* make some functions as in-line functions
* clean up and optimize the code comments
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The current context preservation implementation saves the spsr and
lr_irq registers, which contain the cpsr and pc register values of the
interrupted context, in the thread callee-saved block and this prevents
nesting of interrupts because these values are required to be part of
the exception stack frame to preserve the nested interrupt context.
This commit reworks the AArch32 non-Cortex-M context preservation
implementation to save the spsr and lr_irq registers in the exception
stack frame to allow preservation of the nested interrupt context as
well as the interrupted thread context.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In the current implementation both SPSR and ELR registers are saved with
the callee-saved registers and restored by the context-switch routine.
To support nested IRQs we have to save those on the stack when entering
and exiting from an ISR.
Since the values are now carried on the stack we can now add those to
the ESF and the initial stack and take care to restore them for new
threads using the new thread wrapper routine.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Out-of-tree code can still be using the old file locations. Introduce
header shims to include the headers from the new correct location and
print a warning message.
These shims should be removed after two releases.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the `cortex_r` directory under the AArch32 to
`cortex_a_r`, in preparation for the AArch32 Cortex-A support.
The rationale for this renaming is that the Cortex-A and Cortex-R share
the same base design and the difference between them, other than the
MPU vs. MMU, is minimal.
Since most of the architecture port code and configurations will be
shared between the Cortex-A and Cortex-R architectures, it is
advantageous to have them together in the same directory.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_arm_exc_exit (z_arm_int_exit) requires the current execution mode to
be specified as a parameter (through r0). This is not necessary because
this value can be directly read from CPSR.
This commit modifies the exception return function to retrieve the
current execution mode from CPSR and removes all provisions for passing
the execution mode parameter.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add snippets sections in linker script, so we add support for
zephyr_linker_sources() in native_posix arch.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The current AArch64 interrupt system relies on the multi-level
interrupt mechanism and the `irq_nextlevel` public interface to invoke
the Generic Interrupt Controller (GIC) driver functions.
Since the GIC driver has been refactored to provide a direct interface,
in order to resolve various implementation issues described in the GIC
driver refactoring commit, the architecture interrupt control functions
are updated to directly invoke the GIC driver functions.
This commit also adds support for the ARMv8 cores (e.g. Cortex-A53)
that allow interfacing to a custom external interrupt controller
(i.e. non-GIC) by mapping the architecture interrupt control functions
to the SoC layer interrupt control functions when
`ARM_CUSTOM_INTERRUPT_CONTROLLER` configuration is enabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current AArch32 (Cortex-R and to-be-added Cortex-A) interrupt
system relies on the multi-level interrupt mechanism and the
`irq_nextlevel` public interface to invoke the Generic Interrupt
Controller (GIC) driver functions.
Since the GIC driver has been refactored to provide a direct interface,
in order to resolve various implementation issues described in the GIC
driver refactoring commit, the architecture interrupt control functions
are updated to directly invoke the GIC driver functions.
This commit also adds support for the Cortex-R cores (Cortex-R4 and R5)
that allow interfacing to a custom external interrupt controller
(i.e. non-GIC) by introducing the `ARM_CUSTOM_INTERRUPT_CONTROLLER`
configuration that maps the architecture interrupt control functions to
the SoC layer interrupt control functions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We rename the z_arm_int_lib_init() function to
z_arm_interrupt_init(), aligning to how other
ARCHes name their IRQ initialization function.
There is nothing about 'library' in this
functionality, so we remove the 'lib' in-fix.
The commit does not introduce any behavior changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
arc mpu ver3 does not allow mpu region overlap, so need to enable
MPU_REQUIRES_NON_OVERLAPPING_REGIONS.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add zephyr execution regions(text, rodata, data, noinit, bss, etc.)
with proper attributes to translation tables.
Linker script has been modified a little to align these sections to
minimum translation granule(4 kB).
With this in place, code cannot be overwritten accidently as it is
marked read only. Similarly, execution is prohibited from data/RW
section as it is marked execute-never.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Add MMU support for ARMv8A. We support 4kB translation granule.
Regions to be mapped with specific attributes are required to be
at least 4kB aligned and can be provided through platform file(soc.c).
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Following changes are done:
- The vector table should be placed in text segment.
- Removed Vector relay table related entries as it is
only applicable to aarch32.
- irq_vector_table contains ISR pointers - should be placed
in rodata segment.
- put openocd_dbg in rodata and skip adding <linker_relocate.ld>
as CONFIG_CODE_DATA_RELOCATION is not defined for aarch64
currently (add later if needed).
Fixes: #22673
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
plt and got sections are used for dynamic linking which
is not supported in Zephyr.
Reference: #11953
commit 3ba7097e73 ("linker: add orphan sections to linker script")
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
We introduce a macro to define the IRQ priority level for
PendsV, and use it in arch/arm/include/aarch32/exc.h
to set the PendSV IRQ level. The commit does not change
the behavior of PendSV interrupt.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds some documentation for the exception
priority scheme for 32-bit ARM architecture variants.
In addition we document that SVCall priority level for
ARMv6-M is implicitly set to highest (by leaving it as
default).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Public arm/aarch32/exc.h header file is used by both
Cortex-M and Cortex-R; we update the header information
accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit fixes the improper naming of the ROM sections.
1. Rename the first ROM section, which was previously named using the
`_TEXT_SECTION_NAME` definition, to `rom_start`, as this section does
not actually represent the text section.
2. Rename the second ROM section, which was previously named
`_TEXT_SECTION_NAME_2` which supposedly refers to the definition of
the same name that does not exist, to `_TEXT_SECTION_NAME`. Note that
this is indeed the section that contains the text section from the
source image.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit cleans up the linker.ld file for the Cortex-R arch.
* Convert all TAB characters to SPACE.
* Fix insane placement of curly brackets.
* Fix overall text alignments.
* Remove the special handlings for the Cortex-M devices that were
copied from `include/arm/aarch32/cortex_m/scripts/linker.ld`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit relocates the `_vector_end` symbol that was previously
placed after the OpenOCD sections to before these sections, as the
OpenOCD debug sections are not part of the "vector table."
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit fixes the improper naming of the ROM sections.
1. Rename the first ROM section, which was previously named using the
`_TEXT_SECTION_NAME` definition, to `rom_start`, as this section does
not actually represent the text section.
2. Rename the second ROM section, which was previously named
`_TEXT_SECTION_NAME_2` which supposedly refers to the definition of
the same name that does not exist, to `_TEXT_SECTION_NAME`. Note that
this is indeed the section that contains the text section from the
source image.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit cleans-up the linker.ld file for the AArch64 arch.
* Convert all TAB characters to SPACE.
* Fix insane placement of curly brackets.
* Fix overall text alignments.
* Remove the special handlings for the Cortex-M devices that were
copied from `include/arm/aarch32/cortex_m/scripts/linker.ld`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit fixes incorrect Cortex-R interrupt lock, unlock and state
check function implementations.
The issues can be summarised as follows:
1. The current implementation of 'z_arch_irq_lock' returns the value
of CPSR as the IRQ key and, since CPSR contains many other state
bits, this caused 'z_arch_irq_unlocked' to return false even when
IRQ is unlocked. This problem is fixed by isolating only the I-bit
of CPSR and returning this value as the IRQ key, such that it
returns a non-zero value when interrupt is disabled.
2. The current implementation of 'z_arch_irq_unlock' directly updates
the value of CPSR control field with the IRQ key and this can cause
other state bits in CPSR to be corrupted. This problem is fixed by
conditionally enabling interrupt using CPSIE instruction when the
value of IRQ key is a zero.
3. The current implementation of 'z_arch_is_in_isr' checks the value
of CPSR MODE field and returns true if its value is IRQ or FIQ.
While this does not normally cause an issue, the function can return
false when IRQ offloading is used because the offload function
executes in SVC mode. This problem is fixed by adding check for SVC
mode.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the redundant text section offset specification in
the AArch64 linker script.
The text section offset is already specified by the
`text_section_offset.ld`, which is included by
`arch/common/CMakeLists.txt`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The callee-saved registers have been separated out and will not
be saved/restored if exception debugging is shut off.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce the basic ARM64 architecture support.
A new CONFIG_ARM64 symbol is introduced for the new architecture and new
cmake / Kconfig files are added to switch between ARM and ARM64.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Instead of having TI_CCFG_PRESENT as a symbol that's only defined in
soc/arm/ti_simplelink/cc13x2_cc26x2/Kconfig.defconfig.series and y when
SOC_SERIES_CC13X2_CC26X2 is enabled, turn it into a helper symbol that's
selected by SOC_SERIES_CC13X2_CC26X2.
This avoids having a symbol that's only defined in a Kconfig.defconfig
file, which is confusing. It also makes things a bit more generic, in
case other boards with CCFGs are added.
Also rename it to HAS_TI_CCFG to be consistent with other helper
symbols, and add a help text.
Flagged by scripts/kconfig/lint.py.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This commit does the following:
- renames the 'text' ROM section to 'rom_start', to reflect
that this section is the first section of the image.
- renames the 'TEXT_SECTION_NAME_2' section to 'text', since
that section (whose start is pointed by _image_text_start)
holds the entire image text section.
The commit removes the confusion by having multiple ROM sections
named as 'text' in ARM Cortex-M builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
We should not use indentation for pre-processor directives.
This commit fixes the indentation in the ARM Cortex-M linker
script.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Implement a set of per-cpu trampoline stacks which all
interrupts and exceptions will initially land on, and also
as an intermediate stack for privilege changes as we need
some stack space to swap page tables.
Set up the special trampoline page which contains all the
trampoline stacks, TSS, and GDT. This page needs to be
present in the user page tables or interrupts don't work.
CPU exceptions, with KPTI turned on, are treated as interrupts
and not traps so that we have IRQs locked on exception entry.
Add some additional macros for defining IDT entries.
Add special handling of locore text/rodata sections when
creating user mode page tables on x86-64.
Restore qemu_x86_64 to use KPTI, and remove restrictions on
enabling user mode on x86-64.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- In early boot, enable the syscall instruction and set up
necessary MSRs
- Add a hook to update page tables on context switch
- Properly initialize thread based on whether it will
start in user or supervisor mode
- Add landing function for system calls to execute the
desired handler
- Implement arch_user_string_nlen()
- Implement logic for dropping a thread down to user mode
- Reserve per-CPU storage space for user and privilege
elevation stack pointers, necessary for handling syscalls
when no free registers are available
- Proper handling of gs register considerations when
transitioning privilege levels
Kernel page table isolation (KPTI) is not yet implemented.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This code:
1) Doesn't work
2) Hasn't ever been enabled by default
3) We mitigate Spectre V2 via Extended IBRS anyway
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We use a fixed value of 32 as the way interrupts/exceptions
are setup in x86_64's locore.S do not lend themselves to
Kconfig configuration of the vector to use.
HW-based kernel oops is now permanently on, there's no reason
to make it optional that I can see.
Default vectors for IPI and irq offload adjusted to not
collide.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Nothing too fancy here, we try as much as possible to
use the same register layout as the C calling convention.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Includes linker script fragments for the kernel object
tables and automatic memory partitions. The data section
is moved to the end per the requirements of
include/linker/kobject.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_x86_thread_page_tables_get() now works for both user
and supervisor threads, returning the kernel page tables
in the latter case. This API has been up-leveled to
a common header.
The per-thread privilege elevation stack initial stack
pointer, and the per-thread page table locations are no
longer computed from other values, and instead are stored
in thread->arch.
A problem where the wrong page tables were dumped out
on certain kinds of page faults has been fixed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add two new non-static APIs for dumping out the
page table entries for a specified memory address,
and move to the main MMU code. Has debugging uses
when trying to figure out why memory domains are not
set up correctly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't need to set up GDT data descriptors for setting
%gs. Instead, we use the x86 MSRs to set GS_BASE and
KERNEL_GS_BASE.
We don't currently allow user mode to set %gs on its own,
but later on if we do, we have everything set up to issue
'swapgs' instructions on syscall or IRQ.
Unused entries in the GDT have been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Define MSR register addresses for various MSRs related to
SYSCALL/SYSRET. We also add MSRs for FS/GS base addresses
(for GS, both kernel and user mode) to support SWAPGS.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were previously assumed to always be fatal.
We can't have the faulting thread's XMM registers
clobbered, so put the SIMD/FPU state onto the stack
as well. This is fairly large (512 bytes) and the
execption stack is already uncomfortably small, so
increase to 2K.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit addresses the following issues:
1. Add a new Kconfig configuration for specifying Dual-redundant Core
Lock-step (DCLS) processor topology.
2. Register initialisation is only required when Dual-redundant Core
Lock-step (DCLS) is implemented in hardware. This initialisation is
required on DCLS only because the architectural registers are in an
indeterminate state after reset and therefore the initial register
state of the two parallel executing cores are not guaranteed to be
identical, which can lead to DCCM detecting it as a hardware fault.
A conditional compilation check for this hardware configuration
using the newly added CONFIG_CPU_HAS_DCLS flag has been added.
3. The existing CPU register initialisation code did not take into
account the banked registers for every execution mode. The new
implementation ensures that all architectural registers of every
mode are initialised.
4. Add VFP register initialisation for when floating-point support is
enabled and the core is configured in DCLS topology. This
initialisation sequence is required for the same reason given in
the first issue.
5. Add provision for platform-specific initialisation on Cortex-R
using PLATFORM_SPECIFIC_INIT config and z_platform_init function.
6. Remove seemingly pointless and inadequately defined STACK_MARGIN.
Not only does it violate the 8-byte stack alignment rule, it does
not provide any form of real stack protection.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commits implements the support for dynamic direct
interrupts for the ARM Cortex-M architecture, and exposes
the support to the user as an ARM-only API.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The SRAM address and size are currently available as both
DT_SRAM_{BASE_ADDRESS,SIZE} and as CONFIG_SRAM_{BASE_ADDRESS,SIZE} (via
the Kconfig preprocessor).
Use the CONFIG_SRAM_* versions everywhere, and remove generation of the
DT_SRAM_* versions from gen_defines.py.
The Kconfig symbols currently depend on 'ARC || ARM || NIOS2 || X86'.
Not sure why, so I removed it.
It looks like no configuration files set CONFIG_SRAM_* at the moment, so
another option might be to use the DT_* symbols everywhere instead. Some
Kconfig.defconfig.series files add defaults to them though.
Also improve the help texts for CONFIG_SRAM_* to say that they normally
come from devicetree rather than configuration files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is no longer needed, since all in-tree platforms are only using
the standard mstatus formats. Remove it to avoid the complexity.
Signed-off-by: Olof Johansson <olof@lixom.net>
Out-of-tree code can still be using the old file locations. Introduce
header shims to include the headers from the new correct location and
print a warning message.
Add also a new Kconfig symbol to suppress such warning.
The shim will go away after two releases, so make sure to adapt your
application for the new locations.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
to its own linker file snippet so snippets can be placed before it.
Using zephyr_linker_sources().
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
We now dump more information for less common cases,
and this is now centralized code for 32-bit/64-bit.
All of this code is now correctly wrapped around
CONFIG_EXCEPTION_DEBUG. Some cruft and unused defines
removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
doxygen does not support ordered (numbered) lists using reST syntax
``1)`` or ``a)`` unless the doxygen comments are bounded by ``@rst`` and
``@endrst`` markers. The "doxygen" way to do ordered lists is to use
``-#``. This PR cleans this up for our API documentation.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
We should be adding a compiler barrier for IP register
when we are doing syscall generation on Cortex-M
architecture. The syscall generation itself only
does an SVC trigger; the execution returns to thread
mode and ARM does not guarantee that IP register is
preserved, when we finally get back to the point where
the syscall was invoked. This may be a problem, when
the compiler inlines the arch_syscall_invoke function,
so the IP register may be in use.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix the following warning from gcc-9.2:
arm/syscall.h:52:2: error: listing the stack pointer register 'sp'
in a clobber list is deprecated [-Werror=deprecated]
52 | __asm__ volatile("svc %[svid]\n"
| ^~~~~~~
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use assembly for _xt_set_intset() and _xt_set_intclear() instead of
calling into the Xtensa HAL, allowing these to be inlined.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit inlines the direct ISR functions that were previously
implemented in irq_manage.c, since the PR #20119 resolved the circular
dependency between arch.h and kernel_structs.h described in the issue
#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit inlines arch_isr_direct_header function that was previously
placed in irq_manage.c for no good reason (possibly in relation to the
FIXME for #3056).
In addition, since the PR #20119 resolved the header circular
dependency issue described in the issue #3056, this commit removes the
references to it in the code.
The reason for not inlining _arch_is_direct_pm as the #3056 FIXME
suggests is that there is little to gain from doing so and there still
exists circular dependency for the headers required by this function
(#20119 only addresses kernel_structs.h, which is required for _current
and _kernel, which, in turn, is required for handling interrupt nesting
in many architectures; in fact, Cortex-A and Cortex-R port will require
it as well).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We need to pass system call args using a register-width
data type and not hard-code this to u32_t.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move _LINKER and _ASMLANGUAGE to target.cmake because of how we pick the
linker script that might be used. This way regardless of how or where a
linker.ld gets included we will always set _LINKER & _ASMLANGUAGE (so
any header that needs check based on those defines they can,
specifically generated_dts_board.h)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
posix_soc_if.h is meant to be a private header between
the POSIX ARCH, SOC, and maybe boards,
it should not contain definitions meant to be used directly
by the kernel or app.
Some definitions were placed here due to a dependency moebius
loop.
Unravel that by removing all header dependencies in posix_soc_if.h,
move those definitions out to a more logical place,
and while we are here reduce the amount of users of
irq_offload.h in POSIX arch related code
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
- Bring in CONFIG_X86_MMU and some related defines to
common X86 Kconfig
- Don't set ARCH_HAS_USERSPACE for intel64 yet when
X86_MMU is enabled
- Uplevel x86_mmu.c to common code
- Add logic for handling PML4 table and generating PDPTs
- move z_x86_paging_init() to common kernel_arch_func.h
- Uplevel inclusion of mmustructs.h to common x86 arch.h,
both need it for memory domain defines
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Same snippet as in our 32-bit linker file. Creates
an iterable section with all the MMU_BOOT_REGION() info.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some linker symbols indicating the bounds of various memory
areas needed for setting up boot MMU regions are now in
place.
MMU_BOOT_REGION macros added to align the bounds of these
sections if we're using runtime page tables.
_image_rodata_start moved to the proper place, it was not
accounting for the rodata sections specified in
linker/common_rom.ld.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Program text, rodata, and data need different MMU
permissions. Split out rodata and data from the program
text, updating the linker script appropriately.
Region size symbols added to the linker script, so these
can later be used with MMU_BOOT_REGION().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For ARM, Z_ARCH_EXCEPT triggers an SVC to induce a system error.
This code block may be inlined, so, if we want to return from
this error DIRECTLY to thread mode, e.g. if the system error
occurred in ISR context and we are not aborting the current
thread, we must instruct the compiler that the execution
may continue after the inlined SVC. Therefore, we must remove
the CODE_UNREACHABLE statements.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Duplicate definitions elsewhere have been removed.
A couple functions which are defined by the arch interface
to be non-inline, but were implemented inline by native_posix
and intel64, have been moved to non-inline.
Some missing conditional compilation for z_arch_irq_offload()
has been fixed, as this is an optional feature.
Some massaging of native_posix headers to get everything
in the right scope.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* implement DIRECT IRQ support both for normal irq and fast irq.
* add separate interrupt stack for fast irq and use CONFIG_ARC_
_FIRQ_STACK to control it. This will bring shortest interrupt
latency for fast irq.
* note that scheduing in DIRECT IRQ is not supported.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
We should be adding a compiler barrier for IP and SP
registers when we are doing syscall generation on
ARMv6-M architecture. The syscall generation itself
only does an SVC trigger; the execution returns to
thread mode and ARM does not guarantee that IP
register is preserved, when we finally get back to
the point where the syscall was invoked. The SP
also needs to be preserved for syscalls returning
64-bit results. In that case the r0 may hold a
pointer to the stack where the 64-bit result was
pushed, That is, the stack pointer may have been
changed due to the syscall, and C code needs to
know that.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
As we are allowed to pass any integer value as as software
fatal exception reason, we need to fix the inline assembly
for ARMv6-M, to accept large immediate offsets. We do this
by changing the way we write the exception reason to R0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The struct definitions for pdpt, pd, and pt entries has been
removed:
- Bitfield ordering in a struct is implementation dependent,
it can be right-to-left or left-to-right
- The two different structures for page directory entries were
not being used consistently, or when the type of the PDE
was unknown
- Anonymous structs/unions are GCC extensions
Instead these are now u64_t, with bitwise operations used to
get/set fields.
A new set of inline functions for fetcing various page table
structures has been implemented, replacing the older macros.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This hasn't been necessary since we dropped support for 32-bit
non-PAE page tables. Replace it with u64_t and scrub any
unnecessary casts left behind.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will be used for both 32-bit and 64-bit mode.
This header gets pulled in by x86's arch/cpu.h, so put
it in include/arch/x86/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
include/sys/arch_inlines.h will contain all architecture APIs
that are used by public inline functions and macros,
with implementations deriving from include/arch/cpu.h.
kernel/include/arch_interface.h will contain everything
else, with implementations deriving from
arch/*/include/kernel_arch_func.h.
Instances of duplicate documentation for these APIs have been
removed; implementation details have been left in place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Set the NXE bit in the EFER MSR so that the NX bit can
be set in page tables. Otherwise, the NX bit is treated
as reserved and leads to a fault if set.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The POSIX ARCH delegates some of the tasks which normally
are taken care of by the ARCH to the SOC or BOARD levels.
To avoid changes in the kernel-arch IF propagating into
the arch-soc and arch-board interfaces (which would break
off-tree posix boards) isolate them.
Also move arch inlined functions into the arch.h header,
and out from the headers which specify the posix arch-soc
and arch-board interfaces.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
arch/cpu.h and kernel_arch_func.h are expected to define different
functions, per the architecture interface.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is really just to facilitate CPU bootstrap code between
the BSP and the APs, moving the clear operation out of the way.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The linker script was missing symbols that defined the boundaries
of kernel memory segments (_image_rom_end, etc.). These are added
so that core/memmap.c can properly account for those segments.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Set STACK_ALIGN and STACK_ALIGN_SIZE to 8 bytes instead of 4 bytes in
case a 64-bit posix board is used.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
This patch is a preparatory step in enabling the MMU in
long mode; no steps are taken to implement long mode support.
We introduce struct x86_page_tables, which represents the
top-level data structure for page tables:
- For 32-bit, this will contain a four-entry page directory
pointer table (PDPT)
- For 64-bit, this will (eventually) contain a page map level 4
table (PML4)
In either case, this pointer value is what gets programmed into
CR3 to activate a set of page tables. There are extra bits in
CR3 to set for long mode, we'll get around to that later.
This abstraction will allow us to use the same APIs that work
with page tables in either mode, rather than hard-coding that
the top level data structure is a PDPT.
z_x86_mmu_validate() has been re-written to make it easier to
add another level of paging for long mode, to support 2MB
PDPT entries, and correctly validate regions which span PDPTE
entries.
Some MMU-related APIs moved out of 32-bit x86's arch.h into
mmustructs.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix the following warning from gcc-9.2:
x86/ia32/syscall.h: In function 'test_kinit_preempt_thread':
x86/ia32/syscall.h:43:2: error: listing the stack pointer register
'esp' in a clobber list is deprecated [-Werror=deprecated]
43 | __asm__ volatile("push %%ebp\n\t"
| ^~~~~~~
x86/ia32/syscall.h:43:2: note: the value of the stack pointer after
an 'asm' statement must be the same as it was before the statement
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
